Edimax IC-7110W Manual - Page 81
LED Setting
View all Edimax IC-7110W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
settings. Reboot Device LED Setting NOTE: IP address will be reset to default value '192.168.2.3' also. You'll need to change the IP address setting of your computer if the IP address of your computer does not begin with '192.168.2', and subnet mask is not '255.255.255.0', or you'll not be able to connect to this network camera again. If you found the network camera is responding slowly or behaves strange, you can click this button to try to reboot the network camera, this may help. Click „Turn off LED light‟ button to switch the LED light of this network camera off, so all LEDs on the network camera will stop working, in case you don‟t want other people know the camera is transferring data. You can click this button again to switch LED lights on again. Click „Apply‟ to save settings and make the new settings take effect. 80