Edimax IC-9000 Quick Install Guide
Edimax IC-9000 Manual
 |
View all Edimax IC-9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Edimax IC-9000 manual content summary:
- Edimax IC-9000 | Quick Install Guide - Page 1
- Edimax IC-9000 | Quick Install Guide - Page 2
cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Further, this company User's Manual on the CD-ROM. The software and specifications could be subjected to change without notice. Please visit our web site www.edimax.com - Edimax IC-9000 | Quick Install Guide - Page 3
IC-9000! The IC-9000 is designed with the "user-friendly" concept. You can install the IP Camera easily on your home network and then access the IP Camera One IC-9000 DDNS-Free Outdoor IP Camera One Power Adapter One Ethernet Cable One Bracket One Installation Guide One CD ROM (User Guide & Utility - Edimax IC-9000 | Quick Install Guide - Page 4
constant blue light. When there is packet sending/receiving, the LED is blinking blue light. Indicates red light. If there is LED (red) any Internet connection problem, the LED will be blinking red light. 3 Lens The focus network) 7 Digital Input This is for alarm detection, an open - Edimax IC-9000 | Quick Install Guide - Page 5
, a close circuit is on. Block Connects to12V/1.0A power adapter. 8 Power Jack Please make sure you are using the correct power adaptor The button to reset the IP CAM to default 9 Reset Button factory settings. You need to press the reset button for more than 4 seconds to enable the - Edimax IC-9000 | Quick Install Guide - Page 6
follow the following instructions to set up the IC-9000: 1. Please connect the IP CAM accessories to the body of the IC-9000 correctly, including the bracket, power adapter and Ethernet cable, as shown in the above figure. 2. Connect the other end of the Ethernet cable to the home network or office - Edimax IC-9000 | Quick Install Guide - Page 7
Installation 1. Before installing CamView software on your PC or laptop, please make sure you have correctly installed the IC-9000. It's highly recommended to close other Windows applications to prevent the installation from any possbile confliction. 2. Please insert the installation CD into - Edimax IC-9000 | Quick Install Guide - Page 8
Use CamView Software 1. Start the CamView application from either Start -> Programs -> CamView or the shortcut on the desktop of the Microsoft Windows. 2. Once the CamView Started, it will search the IC-9000 in your Local Area Network automatically and show the CAM ID of each of the found IP Cam in - Edimax IC-9000 | Quick Install Guide - Page 9
Note: If the Camera you want to see is outside of your LAN and the Cam ID is not sored in the "CameraList", please right-click on the "CameraList", choose "New Camera" and enter the Cam ID and password. Note: For further operation, please refer to the manual. - Edimax IC-9000 | Quick Install Guide - Page 10
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE) The R&TTE Directive repeals and replaces in the - Edimax IC-9000 | Quick Install Guide - Page 11
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
 |
 |
