Edimax PT-31E Manual

Edimax PT-31E Manual

Get Edimax PT-31E PDF manuals and user guides View all Edimax PT-31E manuals
Add to My Manuals
Save this manual to your list of manuals

Edimax PT-31E manual content summary:

  • Edimax PT-31E | Manual - Page 1
    PT-31E/PT-31W User Manual 11-2012 / v1.1
  • Edimax PT-31E | Manual - Page 2
    entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves about this product, please refer to the user manual on the CD-ROM. The software and specifications are subject to change without notice
  • Edimax PT-31E | Manual - Page 3
    CONTENTS CHAPTER I: PRODUCT INFORMATION ...4 1-1 Package Contents ...4 1-2 Getting Familiar with Your New Network Camera 4 1-3 Camera Installation...7 Chapter II Using Network IP Camera by Web Interface 11 2.1 Locate the IP address of Network IP Camera 11 2.2 Connect to IP Camera's Web User
  • Edimax PT-31E | Manual - Page 4
    4-3-4 Schedule ...84 4-3-5 Event...86 4-3-6 Security ...88 4-4 Video Playback...91 4-4-1 Advanced Search ...93 4-4-2 Event Search ...96 4-4-3 Video Playback...100 Chapter V Troubleshooting ...103 Federal Communication Commission Interference Statement 104 3
  • Edimax PT-31E | Manual - Page 5
    Network camera  1 x Power adapter  1 x Ethernet cable  1 x Mounting kit  1 x CD with utility software and user manual  1 x Quick installation guide  1 x Detachable antenna (PT-31W only) 1-2 Getting Familiar with Your New Network Camera 1 3 2 \2 \2 4 \2 Item 1 - Light sensor 2 - IR LEDs
  • Edimax PT-31E | Manual - Page 6
    configuration menu. This will be helpful if you don't want other people to know the operation status of this IP camera. 1 2 3 4 5 Item 1 - Audio out 2 - DC12V 6 PT-31E Description Connects to external audio amplifier to output voice. Use 3.5mm audio cable. Connect to DC power adapter output 5
  • Edimax PT-31E | Manual - Page 7
    POWERED CABLE! Connect to your local area network by Ethernet cable. Inserts SD card for video recording. Maximum 32GB of SD-HD card supported. PT-31W Item 1 - Audio out 2 - DC12V 3 - WPS/ RESET Description Connects to external audio amplifier to output voice. Use 3.5mm audio cable. Connect to DC
  • Edimax PT-31E | Manual - Page 8
    for video recording. Maximum 32GB** of SDHD card supported. Connect the detachable antenna when wireless connection is required PIN you wish to insert or release. 1-3 Camera Installation Please follow the proceeding instructions to set up your new network camera. If you wish to place this network
  • Edimax PT-31E | Manual - Page 9
    Step 2: Insert mounting plate B into the slot at the bottom of the network camera. Step 3: Screw mounting plate B to the network camera via the 2 holes indicated by the arrows. Step 4: Mount the network camera on to the wall. 8
  • Edimax PT-31E | Manual - Page 10
    , the cables can pass through mounting plate A as in the picture. Step 7: Connect an Ethernet cable to the network camera via the Ethernet port. Note: PT-31E (PoE model) supports the IEEE 802.3af PoE standard. It can be powered via the Ethernet cable when connected to a PoE switch. 9
  • Edimax PT-31E | Manual - Page 11
    a wall socket. The camera's LED lights should light up after a few seconds, and the camera will test its pan and tilt motor within 1 minute. Please do not obstruct the network camera while it is testing its pan and tilt motor. Step 10: If it needs to set up wireless connection, please attach
  • Edimax PT-31E | Manual - Page 12
    Chapter II Using Network IP Camera by Web Interface 2.1 Locate the IP address of Network IP Camera You can use your new Network IP Camera by its web user interface via web browser. Currently the viewing system requirement for Network IP camera is: ■ OS: Microsoft Windows XP/Vista/7 ■ Browser: IE7,
  • Edimax PT-31E | Manual - Page 13
    Note: The contents of the CD-ROM can also be downloaded from the Edimax website: http://www.edimax.com/en/index.php 2. After the installation is complete, double-click the "EdiView_Finder" icon to execute the application. 3. Press 'Discover' button to search for all
  • Edimax PT-31E | Manual - Page 14
    2.2 Connect to IP Camera's Web User Interface and Install ActiveX Plugin When you know the IP address of IP Camera, you can connect to it by Internet Explorer web browser by entering its IP address in address bar. The use login screen will appear when you get connected: IP Camera's administrator
  • Edimax PT-31E | Manual - Page 15
    For IE 9: Click 'Install' button located at the bottom of IE to install ActiveX plugin. If you're prompted that: 'Windows Firewall has blocked some features of this program' Click 'Allow access', or IP Camera will not be able to function properly. When you're installing Internet Explorer plugin, you
  • Edimax PT-31E | Manual - Page 16
    video stream from camera. NOTE: If this is the first time you use this IP Camera, you can refer to chapter 2.4 for instructions on Setup Wizard, which will guide you to complete the software setup of your new IP Camera. 2.3 Viewing Live Video After ActiveX control is installed, you can view IP
  • Edimax PT-31E | Manual - Page 17
    There are various controls on web page, here are descriptions of every control item: Item Description 'Home' button This button is visible in all setup pages of IP camera, and you can go back to live video view by clicking this button when you're in other page. Stream Select video stream
  • Edimax PT-31E | Manual - Page 18
    Click 'Save' button when you see the image you wish to save, and you'll be prompted to indicate the folder on your computer to save image file. If you changed your mind and don't want to save image file, click 'Cancel'. 'Start Video Record' Click this button to record video and save video file on
  • Edimax PT-31E | Manual - Page 19
    2.4 Client Settings In 'Client Settings' menu, you configure basic IP camera settings like data transfer protocol and data storage folder. To access 'Client Settings' menu, click 'Client Settings' button on the left. The following screen will appear: 18
  • Edimax PT-31E | Manual - Page 20
    Here are the descriptions of every setup item: Item Description RTSP Select this option to use RTSP (Real-Time Streaming Protocol) to transfer video data. HTTP Select this option to use HTTP (Hyper-Text Transfer Protocol) to transfer video data. If you don't know which one you should use,
  • Edimax PT-31E | Manual - Page 21
    Chapter III Advanced Configuration If you wish to configure IP camera's settings, you can access IP camera's 'Configuration' menu, which provides various kinds of system setting. To access configuration menu, click 'Configuration' button on the left. The 'Configuration' submenu will appear, please
  • Edimax PT-31E | Manual - Page 22
    Server Select the time zone of residence from dropdown menu to keep correct date and time. If the area you live uses daylight saving, check this box; otherwise do not check this box to keep time correct. Select this option and date / time setting will not be changed when you
  • Edimax PT-31E | Manual - Page 23
    note that if this IP camera can't access Internet, you must have a time server on local area network, or set the time manually. Set IP camera's date and time manually. Please set current date and time by 'Date' and 'Time' dropdown menu. When you finish with above settings, click 'Apply' button to
  • Edimax PT-31E | Manual - Page 24
    Here are the descriptions of every setup item: Item Description Password / Retype Input administrator's new password in both 'Password' and 'Retype Password Password' field, and click 'Modify' button to change administrator's (Administrator) password. Please note: Don't forget administrator
  • Edimax PT-31E | Manual - Page 25
    the network camera's general and advanced network settings here. 3-3-1 "General" Setup Page Set up IP address for this IP camera. This IP camera supports both IPv4 and IPv6 IP address. Here are the descriptions of every setup item: Item Description LAN Select this option to assign an IP address
  • Edimax PT-31E | Manual - Page 26
    IPv4 / IPv6: Obtain both IPv4 and IPv6 address from DHCP server on LAN automatically. Static IPv4 / IPv6: Assign an IPv4 / IPv6 address to IP camera manually. If you don't have a DHCP server on your local area network, you must use this option to specify an IP address. IP Address(IPv4): Input
  • Edimax PT-31E | Manual - Page 27
    RTSP Port RTP Data Port camera's web configuration interface. Input RTSP port number. When this port number changes, you must change corresponding settings in external network devices (NVR or CMS software) so they can receive this IP camera's video. Input RTP data port number here. When you finish
  • Edimax PT-31E | Manual - Page 28
    can use it to discover this IP camera. Enable QoS to improve the data transfer priority of this IP camera (Your local area network must support QoS). DDNS You can select Video / Audio's QoS DSCP value (0 to 63), or both video and audio. Enable DDNS
  • Edimax PT-31E | Manual - Page 29
    you. You must register a dynamic IP service first. Currently this IP camera supports Dyndns, TZO and No-ip dynamic IP service.. Provider: Select dynamic IP service provider. Host Name: Input the host name you obtained from dynamic IP service provider. User name: Input user name used to login
  • Edimax PT-31E | Manual - Page 30
    The descriptions of every setting in this menu will be given below: Item Description Wireless Select „Enable‟ to activate wireless network function of this IP camera, Connection select „Disable‟ to disable it. Network Type Select the network type of wireless connection. Available options are
  • Edimax PT-31E | Manual - Page 31
    SSID Channel Authentication Input the SSID of the wireless access point you wish to connect. It should be less than 32 alphanumerical characters. When you select a wireless access point above, it‟s SSID will be filled in this field automatically. However, if the SSID is not displayed (the wireless
  • Edimax PT-31E | Manual - Page 32
    Configure via Push Button Configure via PinCode connection. Click this button and this camera will enter PBC-style WPS connection state for 120 seconds. Please push „Start PBC‟ button on the wireless access point you wish to connect within 120 seconds to establish WPS connection (The remaining time
  • Edimax PT-31E | Manual - Page 33
    Method 2: USE PINCODE SETTING Step 1: Power on the wireless AP and the wireless network camera. Wait for 1 minute for both devices to be up and running. Step 2: Open web browser and logo in wireless server. Go to wireless/WPS setting page. Step 3: Open web browser and logo in wireless network camera
  • Edimax PT-31E | Manual - Page 34
    3-4 IP Filter When this IP camera is directly connected to Internet and not protected by firewall, this function acts like a mini built-in firewall to protect the safety of this IP camera and avoid attacks from hackers. Here are the descriptions of every setup item: Item Description Enable
  • Edimax PT-31E | Manual - Page 35
    camera. If you want to remove a set of IP address from the list, click on the IP address and click 'Remove' button. IP Address Input the starting and ending IP address of IP address you wish to (Accepted IP list) deny connections here. IP camera will deny connections established from these IP
  • Edimax PT-31E | Manual - Page 36
    3-5 Video You can adjust the image of the IP camera in this menu. There are 3 sub-menus in this menu: Image Setting, Video Setting, and Overlay, which can be accessed by tabs on the top: 3-5-1 Image Setting You can adjust the image parameters in this page. Here are the descriptions of every setup
  • Edimax PT-31E | Manual - Page 37
    Set all above values to default value '128'. Check 'Vertical' or 'Horizontal' box to flip the image vertically or horizontally, this will help to correct the orientation of image when IP camera is hanged bottom-up by camera holder. Power Line Frequency You can click both 'Vertical' and 'Horizontal
  • Edimax PT-31E | Manual - Page 38
    Here are the descriptions of every setup item: Item Description H.264 Select the compression of main stream: H.264 / MPEG4. /MPEG4 Video Select video resolution. Resolution - H.264: 2048x1536 (QXGA) / 1920x1080 (1080p) 1280x960 (960p) / 1280x720 (720p) 720x480 (D1) / 640x480 (VGA) 320x240 (
  • Edimax PT-31E | Manual - Page 39
    3-5-3 Overlay Setting You can adjust the video overlay parameters in this page. Here are the descriptions of every setup item: Item Description Enable Time Check this box to enable overlaying time stamp on video. Stamp Remove the Check this box to remove time stamp's background color. You
  • Edimax PT-31E | Manual - Page 40
    silent, you can use this Gain function to improve voice volume, so you can hear voice from IP camera more clearly. - Select -2 or -1 dB to correct the voice that is too loud; - Select 0 dB and IP camera will do nothing on the voice; - Select +2 dB to +26 dB to amplify the
  • Edimax PT-31E | Manual - Page 41
    Enable Speaker Check this box to enable speaker. If you don't want people at IP camera (Speaker) to hear you, you can uncheck this box to disable it. Audio Type The format is fixed as G.711 (Speaker) When you finish with above settings, click 'Apply' button to save changes. 3-7 Motion This IP
  • Edimax PT-31E | Manual - Page 42
    with above settings, click 'Apply' button to save changes. 3-8 PTZ Control (RS-485) If you mount the IP camera on pan-tilt camera cradles that support pan-tilt control via RS-485 connection, you can use this function to control pan-tilt camera cradle so you can control the orientation of
  • Edimax PT-31E | Manual - Page 43
    to pan-tilt camera cradle's address code. When the pan-tilt camera cradle does not support Pelco-D protocol, you can define a protocol's detail by this function. Please refer to pan-tilt camera cradle's user manual to define the protocol. - Baud Rate: Select data baud rate of RS-485 interface that
  • Edimax PT-31E | Manual - Page 44
    move pan-tilt camera cradle to home or up/down/left/right position. You can click 'Test' button to send command string for testing. - Command 1 ~ 5: You can define extra pan-tilt camera cradle control strings here of remote server. Please refer to following chapters for detailed instructions. 43
  • Edimax PT-31E | Manual - Page 45
    3-9-1 Settings This page lists all existing events. You can click 'Modify' button to edit an existing event, or 'Remove' to delete an existing event. To create a new even, just click "New" button to add an Event setting. To add a new event, click 'New' button and the descriptions of every setup item
  • Edimax PT-31E | Manual - Page 46
    Item Enable Setting Title Motion Detection Digital Input 1 ~ 2 Enable Schedule Time Enable FTP Enable EMAIL Enable Samba (Net Storage) Enable SD CARD Trigger digital output for xx second(s). Description Check this box to enable this event. If you just want to disable this event temporarily, you can
  • Edimax PT-31E | Manual - Page 47
    3-9-2 Media You can define what kind of media file should be saved on designated media. Here are the descriptions of every setup item: Item Description One Snapshot Save a picture file when event is triggered. H.264 Video Save a H.264 video clip. You can also select the recording length before
  • Edimax PT-31E | Manual - Page 48
    ). A Samba server can be any computer running windows operating system with network neighbor function enabled. Many stand-alone network file server also support samba server function. Here are the descriptions of every setup item: Item Description FTP Server Check this box to enable FTP server
  • Edimax PT-31E | Manual - Page 49
    to communicate with FTP server in passive mode (Some FTP Server may only work when you check this box, while others don't). - Test FTP: Click this button to test FTP server settings above immediately. Check this box to enable Email send. - SMTP Server: Input SMTP server's IP address or hostname
  • Edimax PT-31E | Manual - Page 50
    box. Please note that some Email server uses different port number than standard port 25 when STARTTLS encryption is used. - Test SMTP: Click this button to test SMTP server settings above immediately. Check this box to enable Samba server file upload. - Samba Server Address: Input Samba server
  • Edimax PT-31E | Manual - Page 51
    camera, you can save video files on it. Note: 1. Be sure that the SD Card format should be FAT32. The NTFS format cannot be supported by this camera. 2. Unlink motion detection, this function will record video at specified time period on selected weekday(s). Here are the descriptions of every setup
  • Edimax PT-31E | Manual - Page 52
    3-11 SDHC The IP camera module has an optional SD card slot PCBA board. The standard module does not include this board. The UI shows the capacity is 0 MB when the module without SD card slot and memory card. f you need the function please check the option when you place the order of the IP camera
  • Edimax PT-31E | Manual - Page 53
    Set the time range then click "Search" then shows the records like below. 52
  • Edimax PT-31E | Manual - Page 54
    3-12 Log You can check the usage log of IP camera here. In this page, you can click: 1. First page / Final page: Jump to first / final page of log. 2. Previous / Next: Jump to previous or next page of log. 3. Remove: Clear log. You'll be prompted for confirmation. 53
  • Edimax PT-31E | Manual - Page 55
    3-13 Device Info You can check the information and network settings of this IP camera. These information are very useful when you need to repair or fix the problem of this IP camera. An example of device info page look like this: 54
  • Edimax PT-31E | Manual - Page 56
    3-14 Maintenance You can do some maintenance job about this IP camera here. Here are the descriptions of every setup item: Item Description Reboot Click this button to reboot the IP camera. This function is useful when you find IP camera is not working properly. Reset Clear all settings of
  • Edimax PT-31E | Manual - Page 57
    Upgrade Upgrade IP camera's firmware. Click 'Browse' button to select a firmware image file on your computer first, then click 'Upgrade' button. 3-15 Language You can change the display language of web interface. Click 'Language' button and
  • Edimax PT-31E | Manual - Page 58
    CHAPTER IV: EDIVIEW 64-CHANNEL VIEWER 4-1 EdiView Installation Please follow the following instructions to setup EdiView on Windows Vista / 7 operating system. Please note: You must login as system administrator when you're installing EdiView . 1. Locate EdiView setup file,
  • Edimax PT-31E | Manual - Page 59
    2. You'll see a User Account Control security warning message appear, click 'Yes' to continue. 3. Click 'Next' to continue. 4. Click 'Install' to begin installation. 58
  • Edimax PT-31E | Manual - Page 60
    5. ase wait while installation is being performed. This may take few minutes to done, please be patient. 59
  • Edimax PT-31E | Manual - Page 61
    6. The second part of installation will start automatically. 7. A new setup window will appear, please click 'Next' button to continue. 8. You can select a folder on your computer to install EdiView by clicking 'Change' button, or simply click 'Next' button directly to accept default folder. 60
  • Edimax PT-31E | Manual - Page 62
    9. Click 'Install' to continue. 10.Installation will take few minutes, please be patient. 61
  • Edimax PT-31E | Manual - Page 63
    11.Click 'Finish' when you see this message. EdiView is ready to use now. 12.MSDE (Microsoft SQL Database Engine) installation procedure will start at the same time. Please wait until it completes. 62
  • Edimax PT-31E | Manual - Page 64
    13.You'll be prompted that this program has compatibility issues, click 'Run program' to continue. 63
  • Edimax PT-31E | Manual - Page 65
    14.MSDE installation requires computer reboot to complete, click 'Finish' to reboot the computer. 15.A new icon will appear on your computer's desktop, you can double click on it to start EdiView. 4-2 EdiView Interface To start EdiView , double-click EdiView icon on your computer's desktop: Or click
  • Edimax PT-31E | Manual - Page 66
    65
  • Edimax PT-31E | Manual - Page 67
    You'll see a User Account Control security warning message appear, click 'Yes' to continue. EdiView login window will appear. Default user ID is 'admin' and default password is '1234', click 'OK' when ready. 66
  • Edimax PT-31E | Manual - Page 68
    The main window of EdiView will appear: Exit Camera View Date/Time, Remaining disk space Snapshot camera selection Function Keys Split-screen mode selector 67
  • Edimax PT-31E | Manual - Page 69
    The descriptions of every item are listed as follow: Item Split-screen mode selector Description EdiView supports from 1 to 64 cameras split views. The video from IP camera will display in split-screen display cells, and you can view up to 64
  • Edimax PT-31E | Manual - Page 70
    Select the file, and click 'Open' button to use the picture as background picture. To add a camera, right-click on the background picture and select 'Add Camera...' A new window will appear: Select the camera you wish to add from 'Camera' dropdown list, and check the box 'Image Lost' and / or 69
  • Edimax PT-31E | Manual - Page 71
    repeating procedures listed above. Enter EdiView configuration page. See next chapter for detailed instructions. Playback recorded video. A new video playback window will appear. See chapter III for detailed instructions. Start / stop video recording. When recording video, this button will appear as
  • Edimax PT-31E | Manual - Page 72
    shows a 4-split camera view with only 2 IP cameras configured) To select an IP camera, click its video and it will be highlighted; some IP cameras support additional control, and a control panel will appear at the bottom-right area of EdiView : 71
  • Edimax PT-31E | Manual - Page 73
    The description of these items is listed as follow: Item Pan / Tilt control Description Click the direction arrow to control camera's pan / tilt. Pan / Tilt speed Zoom Exposure Cruise control Drag the slide bar to adjust the pan / tilt speed when you click pan / tilt control arrow. Optical zoom
  • Edimax PT-31E | Manual - Page 74
    The configuration menu will appear. There are 6 sub menus in the configuration menu: Device (Add or remove IP camera / video server) Recording (Configure video recording) System (Configure system-wide settings) Schedule (Configure schedule recording) Event (Configure event recording) Security (
  • Edimax PT-31E | Manual - Page 75
    74
  • Edimax PT-31E | Manual - Page 76
    IP camera setup window will appear on the right: If your IP camera is located on local area network, click 'Search' button. Wait for few seconds or few minutes until the search is complete, and all IP cameras found on your local area network will be listed: In this example, an IP camera has been
  • Edimax PT-31E | Manual - Page 77
    EdiView. If the IP camera you wish to add is not located on local area network, you have to input the details of IP camera manually: 1. Input the network settings of IP camera, including IP address, HTTP port number, user name / password. 2. Click button (located at the right of 'Model' item
  • Edimax PT-31E | Manual - Page 78
    Every IP camera has a check box, indicating if it is enabled. If a camera is not enabled, it will not be displayed in EdiView's video view. You can also manage IP camera list by the following function: Enable All: Enable all IP cameras in the list. Disable All: Disable all IP cameras in the list.
  • Edimax PT-31E | Manual - Page 79
    The descriptions of every item are listed as follow: Item Select Camera Record Mode Description All IP camera's Please select an IP camera from the list to setup its recording behavior. EdiView will attempt to connect to selected IP camera, if it's not connectable, you'll receive an error message
  • Edimax PT-31E | Manual - Page 80
    Use the mouse to click blocks on the grid pattern to assign the areas you wishes EdiView to detect / ignore motion. EdiView will detect motion for areas which are NOT covered by blocks only. To add or erase blocks: To add blocks, click + button; to erase blocks, clickbutton. Click 'Reset' button to
  • Edimax PT-31E | Manual - Page 81
    Drag the slide bar to setup sensitivity level from 1 to 10. Larger number indicates more sensitivity. To apply this motion detection settings to all IP cameras, click 'Apply to All Cameras' button. When you finish setting, click 'OK' button to save changes you made, or click 'Cancel' button to
  • Edimax PT-31E | Manual - Page 82
    No: Do not display caption on camera view Camera ID: Display Camera's ID number Camera ID + Camera Name: Display both camera's ID and camera's name. Data Storage Setting Setup hard disk data storage: Enable Recycle: Check this box and the latest recording video will overwrite oldest recorded
  • Edimax PT-31E | Manual - Page 83
    Start-up Condition you specified here, you'll receive an alarm message to notify you should do something to prevent from running out of storage space. Select the behavior of EdiView when computer starts up. You can select multiple options you want to use: Auto run, when Windows start: Check this
  • Edimax PT-31E | Manual - Page 84
    same domain name. Receiver: Input the E-mail receiver's address here. CC: input additional E-mail receiver's address here. Subject: Input the subject of sent E-mail. This will also help you to identify the E-mail sent by EdiView . Number of attachments: Input the number of snapshot attachments
  • Edimax PT-31E | Manual - Page 85
    4-3-4 Schedule You can configure recording schedule in this sub-menu. When you enter this sub-menu for first time, click 'Add Job' button to add a new schedule recording job: 84
  • Edimax PT-31E | Manual - Page 86
    A new window will appear on the right: You can configure a new schedule recording job here. The descriptions of every setup items are listed as follow: Item Weekly Schedule Description Select the time period in a week of this schedule. There are total 48 x 7 blocks in a week schedule, where every
  • Edimax PT-31E | Manual - Page 87
    Events 'DEL' first, then click the time period block. Select the event to trigger recording: Round-The-Clock: Recording is time-activated (according to schedule). Motion Detection: Recording is motion-activated. Dedicated Schedule DI Input: Recording is activated by DI (Digital Input) signal
  • Edimax PT-31E | Manual - Page 88
    EdiView can send you an alarm E-Mail message so you can know something happened on the IP camera (motion detected, video lost, or connection lost). A sound can be played to notify the operator at the computer where EdiView is installed, too. To add a new event, click 'Add' button, and a new window
  • Edimax PT-31E | Manual - Page 89
    Trigger Operation(s) you want to specify more than one alarm condition for the same IP camera, Define the action which will be taken when alarm is triggered: Send E-Mail: an E-mail will be sent when alarm is triggered. Play Sound: Play a sound on the computer where EdiView is installed. To add a
  • Edimax PT-31E | Manual - Page 90
    There are two kinds of user in EdiView: Administrator and user. Administrator can configure EdiView, while user can only view video of camera, and perform limited system configuration (schedule, record, and video playback). 89
  • Edimax PT-31E | Manual - Page 91
    Administrator's user ID is always be 'admin' and cannot be changed. You can only change admin's password in Administrator's 'Password' and 'Confirm Password' field. Please input the same password in both fields for confirmation. To add a user, click 'Add' button, a new window will appear on the
  • Edimax PT-31E | Manual - Page 92
    The descriptions of every setup items are listed as follow: Item User ID Description Password / Confirm Password User Privilege Description Input the user ID used to login EdiView Input any descriptive text to help you to memorize the purpose of this user ID. Input this user's password in both
  • Edimax PT-31E | Manual - Page 93
    A new window will appear: To play a recorded video, you can use one of following two functions: Advanced Search Event Search Please refer to following chapters for detailed instructions of every search mode. 92
  • Edimax PT-31E | Manual - Page 94
    4-4-1 Advanced Search You can search for recorded video within specific time period, and get a list of record modes of all IP cameras. When you enter this menu, please specify start time and stop time: Hour in a day DATE (You can input 0 - 23 in 'Hour in a day' field by keyboard directly). 93
  • Edimax PT-31E | Manual - Page 95
    In this picture, a recorded video of 'Camera 1' has been found at 12 o'clock. A blue mark indicates it's a 'Round Clock' (manual) recording. Other record type include: Blue: Manual Recording Green: Recording is triggered by motion Red: Recording is triggered by Digital Input To view the video, check
  • Edimax PT-31E | Manual - Page 96
    And the video will be prepared for playback. 95
  • Edimax PT-31E | Manual - Page 97
    4-4-2 Event Search You can search for video for playback by triggering event: round the clock, motion detection, or digital input. 96
  • Edimax PT-31E | Manual - Page 98
    To search for video, you have to specify: 1) starting and ending time for video searching in 'Start time' and 'Stop time' field 2) Recording mode: Round Clock, Motion Detection, and I/O Mode (Digital Input). You can check all boxes you wish to search for. 3) Camera: You can check all cameras you
  • Edimax PT-31E | Manual - Page 99
    When you finish, click 'Search' button to search for recorded video, and a list similar to this will appear: You can select the video clip you wish to play, and click 'Play' button. 98
  • Edimax PT-31E | Manual - Page 100
    99
  • Edimax PT-31E | Manual - Page 101
    4-4-3 Video Playback When a video is loaded, the video playback screen will look like this: Close Window s Time Search / Capture Speed Control Video Playback Control Video Position Indicator The descriptions of every item are listed as follow: Item Close Window Video Playback Control
  • Edimax PT-31E | Manual - Page 102
    cannot adjust video playback speed when video is playing. Click or button to search for video (see chapter 3-2 / 3-3 for detailed instruction). Click button to take a snapshot picture of current video playback position. A new window will appear: You can adjust image brightness / contrast
  • Edimax PT-31E | Manual - Page 103
    Time You can click 'Save as' button to save current image (you'll be prompted for image saving location), or click 'Print' to print current image to printer. To back to previous menu, click 'Cancel'; click 'Reset' to reset image parameters back to default value. Current time will be displayed here.
  • Edimax PT-31E | Manual - Page 104
    Problem description Can't connect to IP Camera No IP Camera found No image Possible solution(s) 1) Please check the IP address of IP Camera again. 2) Please make sure the network cable is correctly ", you need to manually remove" SetupEdiview " *3. Remove MSDE (Microsoft SQL Server Desktop Engine)
  • Edimax PT-31E | Manual - Page 105
    and used in accordance with the instructions, may cause harmful interference to radio and on, the user is encouraged to try to correct the interference by one or more of the following is restricted for use with the specific antenna tested in the application for certification. The antenna(s)
  • Edimax PT-31E | Manual - Page 106
    direktiivien 2004/108/EC, 2006/95/EC oleelliset vaatimukset ja muut asiaankuuluvat määräykset. WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for
  • Edimax PT-31E | Manual - Page 107
    of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European directive 2004/108/EC and 2006/95/EC. Equipment: 3Mpx PoE Day & Night PT Network Camera Model No.: PT-31E Report No.: T110906220
  • Edimax PT-31E | Manual - Page 108
    of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive and EMC directive, ETSI. Equipment: 3Mpx Wireless Day & Night PT Network Camera Model No.: PT-31W Report No
  • Edimax PT-31E | Manual - Page 109
    free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure of free software (and charge for this service if you wish), that you receive source they have is not the original, so that any problems introduced by others will not reflect on the original
  • Edimax PT-31E | Manual - Page 110
    2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to
  • Edimax PT-31E | Manual - Page 111
    , but may differ in detail to address new problems or concerns. Each version is given a distinguishing version exceptions for this. Our decision will be guided by the two goals of preserving the YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY
  • Edimax PT-31E | Manual - Page 112
    111
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
PT-31E/PT-31W
User Manual
11-2012 / v1.1