Edimax WP-S1300 Quick Install Guide
Edimax WP-S1300 Manual
 |
View all Edimax WP-S1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Edimax WP-S1300 manual content summary:
- Edimax WP-S1300 | Quick Install Guide - Page 1
1 - Edimax WP-S1300 | Quick Install Guide - Page 2
cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd Please visit our website www.edimax.com for updates. All brand and product names mentioned in this manual are trademarks and/or registered - Edimax WP-S1300 | Quick Install Guide - Page 3
Multi-Language QIG on the CD Český Deutsch Español Français Italiano Magyar Nederlands Polski Português Romania Türkçe Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači. Auf der beiliegend Treiber CD finden Sie deutsche Anleitung zur Schnellinstallation. Incluido en el CD - Edimax WP-S1300 | Quick Install Guide - Page 4
Thank you for purchasing this wireless projector server! This wireless projector server supports both Windows and Mac OS. If your projector server does not work with Mac OS, please download the latest firmware at www.edimax.com. Before you start using this product, please check if there is anything - Edimax WP-S1300 | Quick Install Guide - Page 5
WLAN LED USB AF port USB BF port Description Switches this projector server on and off WPS (Wi-Fi Protected Setup) activation button IR signal receiver (for the remote control) Indicates whether this wireless projector server is on Indicates whether a LAN device is connected Indicates whether there - Edimax WP-S1300 | Quick Install Guide - Page 6
External IR Description Connects to the supplied power adapter Press and hold this button for 5 seconds to reset the projector server to factory defaults For wireless signal transmission Connects to any VGA-compatible display Connects to speakers or an audio amplifier 10/100/1000Mbps Ethernet port - Edimax WP-S1300 | Quick Install Guide - Page 7
keyboard Switches to the next presenter or equivalent to the "Down" key on a computer‟s keyboard Press to select the presenter in the projector server‟s configuration menu Press the battery cover and push it backwards to open the battery compartment (to install or remove the CR 2032 lithium battery - Edimax WP-S1300 | Quick Install Guide - Page 8
is the picture. Skip this step if you plan on hanging the projector server on the wall. Connect the Ethernet cable to the LAN port (this labeled as "LAN" and is located at the back of this projector server). Connect the projector server to an amplifier or a set of speakers via the audio port - Edimax WP-S1300 | Quick Install Guide - Page 9
Connect the projector server to a video display via the VGA connector. Adjust the antennas so they are perpendicular to the ground. Connect the power adapter to an electrical outlet 9 - Edimax WP-S1300 | Quick Install Guide - Page 10
Insert the power connector into the "12V" socket at the back of the projector server. Press the "Power" button located at the front of the projector server. Check the "Power" LED. If it is not on, refer to the "Troubleshooting" section in the user manual. 10 - Edimax WP-S1300 | Quick Install Guide - Page 11
. You should be able to see this image on the screen. Please wait for about 60 seconds for the projector server to start up. Projector server will acquire an IP address from the DHCP server on your LAN automatically, and the IP address will be displayed at the bottom-left corner of the display of - Edimax WP-S1300 | Quick Install Guide - Page 12
the projector server wirelessly: Search for the projector server‟s SSID and establish a connection. Then open your browser and key in the WLAN IP address. (SSID: Edimax Projector) (IP address: 192.168.100.10) Connecting to the projector server via Ethernet: If you wish to connect to the WP-S1300 via - Edimax WP-S1300 | Quick Install Guide - Page 13
When you are prompted to download the software, click "Run". Click "Run" to start software installation. If you see this message, click „Unblock‟. (You must click „Unblock‟ or client utility will become unusable). 13 - Edimax WP-S1300 | Quick Install Guide - Page 14
When the installation is complete, an icon named "WPS" will appear on your computer‟s desktop: The client software will search for the projector server connected to your local area network, and the projector server‟s SSID will be displayed in the "Projector SSID" field. Enter a user name (can be - Edimax WP-S1300 | Quick Install Guide - Page 15
To stop presentation, click „ ‟ button. Note: Please refer to the user manual in the CD-ROM for more detailed information on Internet connection type and other settings. 15 - Edimax WP-S1300 | Quick Install Guide - Page 16
of Conformity We, Edimax Technology Co., LTD., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive (2006/95/EC). Equipment Model No. : Wireless 802.11b/g/n Projector Server : WP-S1300 The following European - Edimax WP-S1300 | Quick Install Guide - Page 17
This equipment has been tested and found to not installed and used in accordance with the instructions, may cause harmful interference to radio communications body (excluding extremities of hands, wrist and feet) during wireless modes of operation. The equipment version marketed in US is edimax.com 17 - Edimax WP-S1300 | Quick Install Guide - Page 18
18
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
1