Home » Edimax Manuals » Print Servers » Edimax WP-S1300 » Manual Viewer

Edimax WP-S1300 Manual

View all Edimax WP-S1300 manuals

Add to My Manuals
Save this manual to your list of manuals

Edimax WP-S1300 manual content summary:

Edimax WP-S1300 | Manual - Page 1
Edimax WP-S1300 | Manual - Page 2
Contents 4 1-2 Safety Instructions 5 1-3 System Requirements 7 1-4 Highlights of this Wireless Projector Server 8 1-5 Familiar with Wireless Projector Server / Remote Control 9 1-6 Install Wireless Projector Server 14 Chapter II Using Projector Server 17 2-1 Switch the Projector Server On and
Edimax WP-S1300 | Manual - Page 3
'WPS' Settings 77 3-6 Configuration Tools 84 3-6-1 Configuration Tools 84 3-6-2 Firmware Upgrade 86 3-6-3 Reset 88 4-1 Hardware Specification 89  Presentation Mode 89  Allow maximum 16 users login 89  Allow 4 user presentation into 1 screen display 89 4-2 Troubleshooting 91
Edimax WP-S1300 | Manual - Page 4
, please ask your dealer of purchase for a new package. Packaging List Item Name No. 1 Wireless Projector Server 2 12V1A Power Adapter 3 Network Cable 4 Remote Control 5 Rubber Foot Pad 6 Wireless Antenna 7 CR-2302 Lithium Battery (Installed in Remote Control) 8 CD(Manual) Quantity 1 1 1 1 4 2 1 1
Edimax WP-S1300 | Manual - Page 5
Please follow the following safety instructions when you‟re using this wireless projector server, or you may damage this projector server and / or yourself! 1. THIS PROJECTOR SERVER IS NOT A TOY! Keep out of reach of children! 2. Do not place this wireless projector server in humid and / or hot
Edimax WP-S1300 | Manual - Page 6
10. There‟s no user-serviceable part inside this wireless projector server; if the wireless projector server is not working properly, please contact the dealer of purchase to ask for help. 11. Do not put the wireless projector server and / or A/C adapter on paper, cloth, or other flammable materials
Edimax WP-S1300 | Manual - Page 7
or MAC OSX 10.5 / 10.6 (Power PC exclusive) with Internet Explorer 5.5, Netscape, Safari, Firefox web browser. At least 100MB of available hard disk space. NOTE: Please check the user manual or specification of the display you're going to use with this projector server for supported resolution
Edimax WP-S1300 | Manual - Page 8
/1000Mbps Ethernet connection) and wireless (802.11b / g / n connection). Wireless interface supports encryption - protects the content of presentation from theft. Presenter needs to input a random 4-digit projector server access code as 2nd level security check. WPS (Wi-Fi Protected Setup) function
Edimax WP-S1300 | Manual - Page 9
will not function. When this LED lights, indicates this wireless projector server is correctly powered. When this LED lights, indicates wired LAN is connected. When this LED flashes, indicates wireless LAN activity. Connects to USB peripherals, supports USB mouse. Connects to PC or NB for direct
Edimax WP-S1300 | Manual - Page 10
pen or pin to press and hold this button for 5 seconds to reset the projector server. VGA D-sub 15 pin video output (Connects to any VGA-compatible display). Stereo supplied power adapter only!). Transmits wireless signal. Please keep both antennas perpendicular to the ground for best signal reception
Edimax WP-S1300 | Manual - Page 11
Equivalent to „Left‟ key on your computer‟s keyboard. Equivalent to „Right‟ key on your computer‟s keyboard. Select previous user (presenter) in projector server‟s configuration menu; Equivalent to „Up‟ key on your computer‟s keyboard when presentation is in progress. Select next user (presenter) in
Edimax WP-S1300 | Manual - Page 12
Control - Top IR Transmitter Name IR Transmitter Description Infrared signal transmitter. When using the remote Control, point the IR transmitter to the front of the projector server. DO NOT use your finger or other object to block the IR transmitter, or your command will not be received by
Edimax WP-S1300 | Manual - Page 13
Remote Control - Back Battery Lid Name Battery Lid Description Press battery lid and push it out to open battery compartment (to install or remove CR-2032 lithium battery).
Edimax WP-S1300 | Manual - Page 14
Install Wireless Projector Server Please follow the following instructions to get the projector server installed: 1. Unpack the wireless projector server‟s package, and make sure no item in the package is missing. 2. Connect antennas to both antenna connectors located at the back or projector server
Edimax WP-S1300 | Manual - Page 15
Insert VGA cable which connects with external video display to VGA connector located at the back of this projector server. 6. Adjust the antennas located at the back of the projector server, so they‟re perpendicular to the ground. 7. Connect the A/C power adapter to the electrical outlet on the wall
Edimax WP-S1300 | Manual - Page 16
facing up. To close battery lid, push it back. 11. Please check the status of the „Power‟ LED located at the front of the projector server. If it does not light, please check all connections and the status of electrical power outlet, or refer to chapter 4-1 „Troubleshooting‟ for possible solutions.
Edimax WP-S1300 | Manual - Page 17
horizontal refresh rate „60Hz‟. * If you see above image shown on display for more than two minutes, please press „Power‟ button to switch the projector server off, and then switch the projector server on again. If this still happens, refer to chapter 4-2 „Troubleshooting‟ for possible solutions.
Edimax WP-S1300 | Manual - Page 18
address for computers wish to connect to projector server when there‟s no DHCP server available. The IP address of projector server can be found on the connected external display, like following picture: The IP Address (Wireless / Wired Ethernet) of projector server can be found here. The IP address
Edimax WP-S1300 | Manual - Page 19
by default. You can use your computer‟s wireless utility to establish connection with this projector server. The SSID (Service Set Identifier) of this projector server is „projector‟ by default: Please select the wireless network named „projector‟, and click „Connect‟ to establish connection. In
Edimax WP-S1300 | Manual - Page 20
the IP address of the Computer If there‟s no DHCP server available on your LAN, please follow the following instructions to set the IP address of the computer, so the computers wish to use the projector server can connect to project server. If the operating system of your computer is.... Windows
Edimax WP-S1300 | Manual - Page 21
respective field: IP address: 192.168.2.x (where x is an integer greater or less than 200, if there‟s more than one computer need to use this projector server on the same network, every computer should use an unique number) Subnet Mask: 255.255.255.0 click „OK‟ when finish.
Edimax WP-S1300 | Manual - Page 22
2-3-2 Windows 2000 IP address setup: 1. Click „Start‟ button (it should be located at lower-left corner of your computer), then click control panel. Double-click Network and Dial-up Connections icon, double click Local Area Connection, and Local Area Connection Properties window will appear. Select
Edimax WP-S1300 | Manual - Page 23
respective field: IP address: 192.168.2.x (where x is an integer greater or less than 200, if there‟s more than one computer need to use this projector server on the same network, every computer should use an unique number) Subnet Mask: 255.255.255.0 click „OK‟ when finish.
Edimax WP-S1300 | Manual - Page 24
2-3-3 Windows XP IP address setup: 1. Click „Start‟ button (it should be located at lower-left corner of your computer), then click control panel. Double-click Network and Internet Connections icon, click Network Connections, and then double-click Local Area Connection, Local Area Connection Status
Edimax WP-S1300 | Manual - Page 25
respective field: IP address: 192.168.2.x (where x is an integer greater or less than 200, if there‟s more than one computer need to use this projector server on the same network, every computer should use an unique number) Subnet Mask: 255.255.255.0 click „OK‟ when finish.
Edimax WP-S1300 | Manual - Page 26
2-3-4 Windows Vista IP address setup: 1. Click „Start‟ button (it should be located at lower-left corner of your computer), then click control panel. Click View Network Status and Tasks, then click Manage Network Connections..Right-click Local Area Netwrok, then select 'Properties'. Local Area
Edimax WP-S1300 | Manual - Page 27
respective field: IP address: 192.168.2.x (where x is an integer greater or less than 200, if there‟s more than one computer need to use this projector server on the same network, every computer should use an unique number) Subnet Mask: 255.255.255.0 click „OK‟ when finish.
Edimax WP-S1300 | Manual - Page 28
Edimax WP-S1300 | Manual - Page 29
software must be installed first. Please follow the following instructions to download and install projector server client software: 1. Use the web browser to connect to the IP address of projector server (WLAN / LAN IP address). Projector server‟s IP address can be found at the lower-left corner
Edimax WP-S1300 | Manual - Page 30
please click „Video Driver‟ to install audio / video driver for complete functionality for Windows 2000 and XP. If you don‟t need audio support, skip to next chapter for instructions of installation-free projector server client software. 3. When you‟re prompted to download the software, click „Run‟:
Edimax WP-S1300 | Manual - Page 31
Edimax WP-S1300 | Manual - Page 32
4. Click „Run‟ to start software installation: 5. Please click „Next‟ when you‟re prompted, until installation procedure is complete.
Edimax WP-S1300 | Manual - Page 33
If you see this warning message, please click „Continue Anyway‟ to continue, or installation cannot be completed (You may see this message appear for more than once).
Edimax WP-S1300 | Manual - Page 34
2-5 Connect to Projector Server To connect to projector server, click „Start‟ in projector server‟s web page: You‟ll be prompted to save or run projector server client software: You can click „Run‟ to run client software directly, or you can click „Save‟ to save client software to your computer‟s
Edimax WP-S1300 | Manual - Page 35
appear: Click local network. button and client software will search for projector server on If there are more than one projector servers found on LAN, please select the projector server you wish to connect from 'Projector' Every projector server‟s SSID can be found at the lower-left corner of
Edimax WP-S1300 | Manual - Page 36
‟s display, and login code can be found at lower-right corner: Login Code SSID Please input a unique user name (used to identify each projector server user and should not be the same with other user, client software will use your computer‟s name as default user name) in „User Name‟ field,
Edimax WP-S1300 | Manual - Page 37
If the login code you provided is not the same with projector server‟s displayed login code, the following message will appear: If you see this message, click „OK‟ to input login code again.
Edimax WP-S1300 | Manual - Page 38
If you entered correct login code, you‟ll be connected to projector server as one of users, and the client software will be look like this: Before any user start presentation, all connected user‟s name and their IP address will be listed on projector server‟s display:
Edimax WP-S1300 | Manual - Page 39
/ Stop‟ button (as indicated above) to start presentation (the content of your computer‟s display will be transmitted to projector server, and being displayed on projector server‟s display). To stop presentation, press „Start / Stop‟ button again. Your computer‟s display content will no longer be
Edimax WP-S1300 | Manual - Page 40
to install the software on your computer. There are two modes of client software: before login and logged in. Before login: Close Application Connect to Projector Server Minimize Client Software
Edimax WP-S1300 | Manual - Page 41
After Login: Minimize Client Software Close Application Play / Stop Image Quality Setup 1/2/3/4 Quad-Split
Edimax WP-S1300 | Manual - Page 42
of system tray, you can right-click on it and its menu will appear. You can also double click client software‟s icon to recall projector server client software (maximize its window): The descriptions of every function of client software will be given below. On-Screen Keyboard Select this function
Edimax WP-S1300 | Manual - Page 43
, repeat above procedure again. Setting Call the setup menu of projector server‟s client software (see chapter x-x for detailed descriptions). Exit Terminates projector server client software, and you‟ll be disconnected from projector server. To start another presentation, you have to launch client
Edimax WP-S1300 | Manual - Page 44
2-6-2 Start / Stop Projection To start / stop projection (display the display content of your computer to projector), simply click „Start / Stop‟ button. When projection has been started, client software will minimize automatically. To stop projection, recall client software and click „Start / Stop‟
Edimax WP-S1300 | Manual - Page 45
2-6-3 Quad-split Display This projector server supports quad-split projector display which allows maximum 4 users to display their computer‟s display content at the same time, and each of them will occupy 1/4 size of projector‟s display. To start quad-split display function, click one of 1/2/3/4
Edimax WP-S1300 | Manual - Page 46
resolution is not one of those 4 , check this option to force projector server to use your computer‟s desktop resolution. Please note this will not affect projector server‟s output resolution, and projector server will try to simulate the resolution of your computer‟s desktop, therefore displayed
Edimax WP-S1300 | Manual - Page 47
below: Item Select Device Release selected device Audio On/Off Description Only selected projector servers will be displayed when toggled. When you‟re broadcasting image, you can un-tick the selected projector servers to release control. Click audio button the color becomes green to present
Edimax WP-S1300 | Manual - Page 48
To display a specific area from your computer desktop to the projector. To use this function, click „Capture Display‟ button Advanced , explorer bar, notification area etc.) on your computer‟s player for projection. For MAC: It requires "Get" and "Set" two steps to make your computer‟s player
Edimax WP-S1300 | Manual - Page 49
‟ button to start projection. In this mode, only the object or area you selected will be displayed on projector. 2-9 USB Direct Show The function allows to project your computer‟s desktop on screen via the connection of USB stop the presentation before use. ‧The function is not available in MAC.
Edimax WP-S1300 | Manual - Page 50
distance will be shortened in some environments, or when the battery state of remote Control is low. 2) If there's strong light source near projector server and / or remote Control, remote Control may not be able to function properly. Name „Black out‟ Button „Menu‟ Button „Page down‟ button „Page
Edimax WP-S1300 | Manual - Page 51
„User Switch‟ is located at the top of projector server: If you wish to select which user should projector server display its display content, you can press this button. The configuration menu of projector server will be shown on projector server‟s display; if there is a progressing presentation and
Edimax WP-S1300 | Manual - Page 52
In this example, total 2 users are connected. You can press „User Switch‟ button to select which user should projector server display its display content ( The selected user will become yellow, the color of the progressing presentation one is Orange). You can press this button again
Edimax WP-S1300 | Manual - Page 53
button on remote Control (Skip this step if there‟s no progressing presentation). 2. Press „Prev.‟ or „Next‟ button to select the user you wish projector server to display its display content, selected user will have a > mark in front of it. 3. When a user is selected, press button on remote Control
Edimax WP-S1300 | Manual - Page 54
can be accessed via the web configuration menu. In this chapter, you‟ll be instructed to user web configuration menu to setup the projector server. Please follow the following steps to connect to the web configuration menu of projector server: 1. Use the web browser to connect to the IP address of
Edimax WP-S1300 | Manual - Page 55
2. Click „Admin Login‟ link on the left. 3. You‟ll be prompted to input administrator‟s username and password. Default „User Name‟ is „admin‟ and „Password‟ is „1234‟. Click „OK‟ button when you‟re ready.
Edimax WP-S1300 | Manual - Page 56
4. After you logged in, the status of projector server will be shown on web browser.
Edimax WP-S1300 | Manual - Page 57
Download You can use this function to download projector server‟s client software. (Same as described in chapter 2-4) Click 'Start' link on the top, and you'll be prompted to run or save projector server's client software. For system MAC OS X10.4 above, please download the presentation utility
Edimax WP-S1300 | Manual - Page 58
3-3 Basic Setting In this menu, you can change web configuration menu password. You can use this function to change the password required for logging onto web configuration menu (user name is always „admin‟ and cannot be changed). The description of every setting item will be described below:
Edimax WP-S1300 | Manual - Page 59
Click „Continue‟ to continue on projector server setting, or click „Apply‟ to reboot projector server, and changes you made will take effect after projector server rebooted.
Edimax WP-S1300 | Manual - Page 60
connection and DNS (Domain Name Service) server. The description of every setting item will be described below: Item Obtain an IP address automatically Use the following IP address IP address Subnet Mask Gateway address Description Select this option and projector server will obtain an IP address
Edimax WP-S1300 | Manual - Page 61
will still function. However, you have to input IP address, not host name, for all servers required by this projector server (like NTP server). When you finish, please click „Apply‟ button to save changes you made; to discard changes, click „Cancel‟ button. If you click „Apply‟, you‟ll see
Edimax WP-S1300 | Manual - Page 62
3-5 Wireless Setting You can configure the settings of the wireless network interface of this projector server from this menu.
Edimax WP-S1300 | Manual - Page 63
to access the Projector Server as an AP. Select „Enable‟ from dropdown menu to enable wireless network function; select „Disable‟ to disable wireless network function (wireless radio off). Select wireless mode. Only AP (Access Point) mode is supported currently. Select the wireless band. Available
Edimax WP-S1300 | Manual - Page 64
clients. 2.4GHz (G) - supports 802.11g wireless clients only. ESSID 2.4GHz (B+G+N) - supports 802.11b, 802.11g, and 802.11 Draft-n wireless clients. Input the ESSID (Extended Service Set IDentifier, i.e. the name used to identify this projector server among other wireless access points) here
Edimax WP-S1300 | Manual - Page 65
discard changes, click „Cancel‟ button. If you click „Apply‟, you‟ll see the following message: Click „Continue‟ to continue on projector server setting, or click „Apply‟ to reboot projector server, and changes you made will take effect after projector server rebooted.
Edimax WP-S1300 | Manual - Page 66
In this menu, you can configure advanced wireless settings of this projector server. Please note that only experienced user should modify these settings, and wrong settings may affect the performance of this projector server. This projector server is able to run properly without any modification
Edimax WP-S1300 | Manual - Page 67
the option to „Disable‟), so only people those who know the ESSID of your wireless router can get connected. Enabling this setting will reduce the chance of radio signal collisions between 802.11b and 802.11g wireless access points. It‟s recommended to set this option to „Auto‟ or „Always‟. However
Edimax WP-S1300 | Manual - Page 68
enhance the data transfer performance of multimedia contents when they‟re being transferred over wireless network. If you don't know what it is / not sure if you ‟ to continue on projector server setting, or click „Apply‟ to reboot projector server, and changes you made will take effect after
Edimax WP-S1300 | Manual - Page 69
encryption. This will allow anyone who found the projector server by wireless network able to connect to projector server and download client software. Refer to chapter 3-5-3-1 for detailed instructions when encryption is disabled. Enables WEP (Wired Equivalent Privacy) encryption. Although some
Edimax WP-S1300 | Manual - Page 70
wireless client support WEP (especially some old IEEE 802.11b wireless clients), therefore WEP provides better compatibility. Refer to chapter 3-5-3-2 for detailed instructions continue on projector server setting, or click „Apply‟ to reboot projector server, and changes you made will take effect
Edimax WP-S1300 | Manual - Page 71
When encryption setting is disabled, projector server‟s wireless interface uses no protection against wireless users who attempted to connect to it. It is convenient for meeting room‟s visitors; however, every one will be able to connect to projector server unless you enabled 802.1x authentication
Edimax WP-S1300 | Manual - Page 72
Click „Continue‟ to continue on projector server setting, or click „Apply‟ to reboot projector server, and changes you made will take effect after projector server rebooted.
Edimax WP-S1300 | Manual - Page 73
3-5-3-2 Encryption: WEP Enable WEP encryption. The description of every setting item will be described below: Item Key Length Key Format Default Tx Key Description There are two types of WEP key length: 64-bit and 128-bit. Using „128-bit‟ is safer than ‟64-bit‟, but will reduce some data transfer
Edimax WP-S1300 | Manual - Page 74
save changes you made; to discard changes, click „Cancel‟ button. If you click „Apply‟, you‟ll see the following message: Click „Continue‟ to continue on projector server setting, or click „Apply‟ to reboot projector server, and changes you made will take effect after
Edimax WP-S1300 | Manual - Page 75
suite. Available options are: WPA (TKIP), WPA2 (AES), and WPA2 Mixed. You can select one of them, but you have to make sure your wireless client support the cipher you selected. Select the type of pre-shared key, you can select Passphrase (8 or more alphanumerical characters, up to 63), or Hex (64
Edimax WP-S1300 | Manual - Page 76
Click „Continue‟ to continue on projector server setting, or click „Apply‟ to reboot projector server, and changes you made will take effect after projector server rebooted.
Edimax WP-S1300 | Manual - Page 77
self pin code. This code will be used when pin-style WPS pairing mode is being used, and WPS wireless clients will need to know this code. Displays the SSID of this projector server. Displays current wireless authentication mode. Here uses asterisk mark ( * ) to show WPA passphrase key. And here
Edimax WP-S1300 | Manual - Page 78
client to send WPS pairing request), Click „Start PBC‟ and projector server will enter „WPS Push-Button‟ mode. When using this mode, another WPS-compatible wireless device must also enter WPS push-button mode with different WPS configuration mode (i.e. if projector server enters WPS push button mode
Edimax WP-S1300 | Manual - Page 79
control users). Please note that when you change the status of Administrator mode, projector server needs to reboot and all connected users must reconnect to projector server. You‟ll be prompted before projector server is rebooting, and you can cancel rebooting. Once enable Administrator mode, all
Edimax WP-S1300 | Manual - Page 80
You can arrange a specific user to display in quad-split display (1, 2, 3, or 4), or display in full-screen mode: Quad-Split Display (Position 1 / 2 / 3 /4) Full-Screen Mode To assign a user to display in specific quad-split display position or full-screen mode, select a user first, then click
Edimax WP-S1300 | Manual - Page 81
save changes you made; to discard changes, click „Cancel‟ button. If you click „Apply‟, you‟ll see the following message: Click „Continue‟ to continue on projector server setting, or click „Apply‟ to reboot projector server, and changes you made will take effect after
Edimax WP-S1300 | Manual - Page 82
server rebooted.
Edimax WP-S1300 | Manual - Page 83
not stop video signal, therefore external display will NOT enter power-save mode when you use this function to stop displaying video contents (if it supports).
Edimax WP-S1300 | Manual - Page 84
3-6 Configuration Tools This menu provides several useful functions, you can save projector server‟s configuration (backup), upgrade firmware (to improve projector server‟s functionality), or reset projector server from this menu. 3-6-1 Configuration Tools You can backup and restore configuration of
Edimax WP-S1300 | Manual - Page 85
on your computer. You‟ll be prompted when you click „Save...‟ button, click „Save‟ to select a folder on your computer to save projector server‟s configuration file. Restore Settings Reset You can give each configuration file a different name, so you can remember the purpose of configuration file
Edimax WP-S1300 | Manual - Page 86
In this menu, you can upgrade the firmware of this projector server. New firmware will provide more functionality, and fix some existing problem. Please download latest firmware from our website. Please click „Next‟ button to start firmware upgrade procedure: Click „Browse...‟ button to select
Edimax WP-S1300 | Manual - Page 87
projector server off during firmware upgrade procedure. Also, please do not remove the network connection during firmware upgrade, if firmware upgrade fail, the projector server may not be able to function properly, and you will need to ask your dealer of purchase for help.
Edimax WP-S1300 | Manual - Page 88
to your command slowly, reboot the projector server may solve the problem. Click „Apply‟ to reboot the projector server. You‟ll be prompted before the projector server reboots itself: Click „OK‟ to reboot the projector server, or click „Cancel‟ to abort. Projector server needs about 60 seconds to
Edimax WP-S1300 | Manual - Page 89
1 screen display  Video Mode  Various video format support by PC side  Firmware Upgradeable  USB type A for wired HID mouse and 2.4G RF remote Control 2.4G RF remote control: Logitech MX Air  USB type B for direct projection Flash/ RAM Connector Wireless LAN Port Power 16MB Flash/ 128MB DDR2
Edimax WP-S1300 | Manual - Page 90
Dimension Temperature Humidity Certification 30(H) x 157(W) x 127(D) mm o o Operating: 10~40 C, Storage: -20~60 C Operating: 10~90% (Non-Condensing) Storage: Max.95% (Non-Condensing) CE, FCC
Edimax WP-S1300 | Manual - Page 91
most cases, you can solve the problem by yourself and you don‟t have to send the projector server back to dealer of purchase to ask of help. Please refer to this troubleshooting table to find out possible solution. Scenario Can‟t connect to projector server Solution 1. Check the LED lights located
Edimax WP-S1300 | Manual - Page 92
sure you selected correct video output type (HDMI or VGA). 5. Make sure the video display you‟re using supports the video output mode you selected (in VGA mode). I hear some sound when projector server is switched on No image output via USB display in 6. Make sure the video display is switched on
Edimax WP-S1300 | Manual - Page 93
. 3. Please access to the disk "dPresenter" from "COMPUTER" and execute "dPresenter.exe". No audio output in MAC 1. Please make sure "Enable Audio" is selected. 2. An inquiry window will pop up to ask you to install extra program to you‟re your MAC PC to output audio to projector server

Match case Limit results 1 per page