Electrolux EI24MO45IBEI30MO45TB Installation Instructions (All Languages)
Electrolux EI24MO45IBEI30MO45TB Manual
 |
View all Electrolux EI24MO45IBEI30MO45TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Electrolux EI24MO45IBEI30MO45TB manual content summary:
- Electrolux EI24MO45IBEI30MO45TB | Installation Instructions (All Languages) - Page 1
beginning, please read these instructions completely and carefully. • Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before installing the built-in trim kit. Remove the turntable from the oven cavity. • Because the kit includes metal parts, caution should be used - Electrolux EI24MO45IBEI30MO45TB | Installation Instructions (All Languages) - Page 2
MICROWAVE OVEN INSTALLATION INSTRUCTIONS 1. Provide an opening in the wall or cabinet as indicated in Illustration 1. The depth should be a minimum of 20" (50.8 cm). The floor of the opening should be constructed of plywood strong enough to support the weight of the microwave gap PRODUCT DIMENSIONS - Electrolux EI24MO45IBEI30MO45TB | Installation Instructions (All Languages) - Page 3
MICROWAVE OVEN INSTALLAITlluIsOtrNatioInN1STRUCTIONS BOTTOM DUCT ASSEMBLY 1. Place the bottom duct adjacent to the wall or cabinet opening. Plug the power cord into the electrical outlet. Carefully guide the oven into the prepared opening. Slide the oven on the Bottom Duct Assembly. Avoid pinching - Electrolux EI24MO45IBEI30MO45TB | Installation Instructions (All Languages) - Page 4
MICROWAVE OVEN INSTALLATION INSTRUCTIONS 3. Push the position of the oven into the cabinet so of the door and frame is even. Pre-drill 4 holes using an ¹⁄₈" bit, using the kit to guide the holes. Attach the built-in trim kit frame with four screws B to the cabinet. See Illustration 7. - Electrolux EI24MO45IBEI30MO45TB | Installation Instructions (All Languages) - Page 5
DIRECTIVES D'INSTALLATION DU FOUR À MICRO-ONDES UN INSTALLATEUR QUALIFIÉ DOIT PROCÉDER À L'INSTALLATION ET AUX RÉPARATIONS. IMPORTANT : CONSERVER À L'USAGE D'UN INSPECTEUR EN ÉLECTRICITÉ LOCAL. LIRE ET CONSERVER CES DIRECTIVES POUR RÉFÉRENCE FUTURE. AVERTISSEMENT L'alimentation électrique pour ce - Electrolux EI24MO45IBEI30MO45TB | Installation Instructions (All Languages) - Page 6
BASIC SPECIFICATIONS DIRECTIVES D'INSTALLATION DU FOUR À MICRO-ONDES 1. Faire une ouverture dans le mur ou l'armoire comme indiqué à l'illustration 1. La profondeur doit être au minimum de 50,8 cm (20 po). Le plancher de l'ouverture doit être en contreplaqué assez fort pour sup porter le poids du - Electrolux EI24MO45IBEI30MO45TB | Installation Instructions (All Languages) - Page 7
DIRECTIVES D'INSTALLATION DUIlluFsOtraUtioRn 1À MICRO-ONDES ENSEMBLE DU CONDUIT INFÉRIEUR D'ÉVACUATION 1. Placer le conduit inférieur dans l'ouverture et centrer. Quand il est placé correctement, les brides seront serrées contre la bordure inférieure de l'ouverture. Voir Illustration 2. 2. - Electrolux EI24MO45IBEI30MO45TB | Installation Instructions (All Languages) - Page 8
DIRECTIVES D'INSTALLATION DU FOUR À MICRO-ONDES 3. Pousser le four dans l'armoire afin que ses pattes entrent dans les évidements de l'ensemble du conduit inférieur d'évacuation. Vérifier alors que le kit soit affleurant à l'armoire. Voir Illustration 6. 4. Ajuster le châssis afin que l'espacement - Electrolux EI24MO45IBEI30MO45TB | Installation Instructions (All Languages) - Page 9
éctrico antes de instalar el juego de moldura para empotrado. Retire el plato giratorio de la cavidad del horno. • El juego incluye partes de metal por lo que debe manipularlo e instalarlo con precaución para evitar el riesgo de lesiones. • No retire las etiquetas, advertencias o placas permanentes - Electrolux EI24MO45IBEI30MO45TB | Installation Instructions (All Languages) - Page 10
digo local alguna indicación de ese tipo. 2. El tomacorriente NO debe estar en el área sombreada como se indica en la ilustración 1. En la parte posterior de la abertura, debe haber un tomacorriente eléctrico de tres clavijas polarizado de 115-120 volt CA, 15 amperios o mayor. 3. La distancia mínima - Electrolux EI24MO45IBEI30MO45TB | Installation Instructions (All Languages) - Page 11
INSTRUCCIONES DE INSTALACIÓN DIlluEstLratHionO1RNO MICROONDAS CONJUNTO DE DUCTO INFERIOR 1. Coloque el ducto inferior en la abertura y céntrelo. Cuando el conjunto de ducto inferior esté colocado correctamente en la abertura, las bridas quedarán firmes contra el borde inferior de la abertura. Vea - Electrolux EI24MO45IBEI30MO45TB | Installation Instructions (All Languages) - Page 12
tornillos B. Vea la ilustración 7. IMPORTANTE: Instale primero el tornillo de montaje de la parte superior izquierda, para asegurar un alineamiento correcto del marco hacia la parte frontal del horno. Ilustración 6 TORNILLO B TORNILLO B TORNILLO B Ilustración 7 TORNILLO B S4 TINS-B003MRR1
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
The electrical requirements for this oven are 115-120 volts AC, 15 amps or larger.
IMPORTANT - PLEASE READ AND FOLLOW
Before beginning, please read these instructions completely and carefully.
•
Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before installing the built-in trim kit.
•
Remove the turntable from the oven cavity.
Because the kit includes metal parts, caution should be used in handling and installation to avoid the possibility of injury.
•
Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty.
•
Please observe all local and national codes and ordinances.
•
The installer should leave these instructions with the consumer who should retain for local inspector’s use and for
•
future reference.
PARTS INCLUDED IN THE KITS
1) FRONT FRAME ASSEMBLY
QTY 1
2) BOTTOM DUCT ASSEMBLY
QTY 1
3) SCREW A (1 ±/²6" LENGTH)
QTY 2
4) SCREW B (1 °" LENGTH)
QTY 4
MICROWAVE OVEN INSTALLATION INSTRUCTIONS