Electrolux EIDW6105GS Complete Owner's Guide (English) - Page 8
Status Window - problems
UPC - 012505110498
View all Electrolux EIDW6105GS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
8 Operating Instructions STATUS WINDOW AVAILABLE ON EIDW6305 Start/Cancel The STATUS window displays codes typically seen during normal operation or programming of the dishwasher. The STATUS window indicates the following activity: 1-24 Indicates number of delay start hours for selected cycle. To start a cycle, press the START/CANCEL key once and close the door. To cancel when a cycle is running, open the door and press the START/ CANCEL key once. Close the door again and the dishwasher will drain and shut off. CL Flashes once the program has been entered and the START/ CANCEL key is pressed. It also NOTE flashes if the door is opened during a wash cycle. Close the dishwasher door to begin or Opening the door during normal operation will only pause the selected cycle. continue a wash cycle. hd WASHING CLEAN Flashes to indicate a water heat delay. Time remaining is displayed in the center of the status window when a cycle is being ran. WASHING will be illuminated in the upper left corner. CLEAN will illuminate on the left side of the display after a cycle is ran and the dishes are clean. SANITIZED SANITIZED will illuminate on the left side of the display after the cycle. If SANITIZE option was selected. Error Indications In certain situations which are critical to the machine function and safe operation, the control shall shut down and indicate an error code 'Er' (See Error Codes on page 21). On units without a display, all indicator lights will flash. If one of these codes are displayed contact the Electrolux Customer Care Center at 1-877-4353287. They will be able to provide assistance in troubleshooting the problem and/or locating an authorized service technician, if needed.