Electrolux FAZ12ES2A Installation Instructions
Electrolux FAZ12ES2A Manual
 |
View all Electrolux FAZ12ES2A manuals
Add to My Manuals
Save this manual to your list of manuals |
Electrolux FAZ12ES2A manual content summary:
- Electrolux FAZ12ES2A | Installation Instructions - Page 1
#10 x l" wood screws (7) Parts Supplied (on some models) Check that all parts are included in parts package. IMPORTANT: Observe all governing codes and ordinances. Check the location where air conditioner will be installed. Proper installation is your responsibility, Make sure you have everything - Electrolux FAZ12ES2A | Installation Instructions - Page 2
) opening width. [] 17"(43.1cm) minimum opening height. mA__t_ B { ,r [:7_ =_ 1 I A. 27"(68.6cm) minimum B. 17" (43.1cm) minimum Through=the=Wall Installation The wall opening measurements should be: [] Width: 22s/8"(57.5 cm) plus twice thickness of wood used to build frame. [] Height: 16 - Electrolux FAZ12ES2A | Installation Instructions - Page 3
iNSTRUCTiONS Excessive Weight Hazard Use two or more people to move and install air conditioner, Failure to do so can result in back or other injury. Remove packaging materials [] Remove and dispose of/recycle packaging materials, Remove tape and glue residue from surfaces before turning on the air - Electrolux FAZ12ES2A | Installation Instructions - Page 4
2. Insertthe right-hand curtain connector tab into the curtain housing channels on the air conditioner. A. Curtain housing B. Curtain bottom channel on air conditioner 3, Slide the curtain housing into the curtain guides as faras it will go. 4. Repeatthe above steps forthe left-hand curtain. Attach - Electrolux FAZ12ES2A | Installation Instructions - Page 5
into Window Attach Side Curtains to Window Frame Handle the air conditioner gently. Be sure your air conditioner cabinet does not fall out of the opening during installation or removal. The place where the power cord exits the air conditioner should be no more than 4 it (1 22 cm) from a grounded - Electrolux FAZ12ES2A | Installation Instructions - Page 6
. Do not block the louvers on the outside of the air conditioner. It is the customer's responsibility and obligation to have this product installed by a qualified technician familiar with through-the-wall room air conditioner installations. Option 1--Wood, metal or plastic molding When using a wood - Electrolux FAZ12ES2A | Installation Instructions - Page 7
room B, Trim Excessive Weight Hazard Use two or more people to move and install air conditioner. Failure to do so can result in back or other injury. NOTE: Handle the air conditioner gently. 1. Insert air conditioner into cabinet. 3. Attach bottom front of panel with front panel screws. 2. Insert
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
INSTALLATIONINSTRUCTIONS
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided
with any too(s listed
here.
Took
Needed
[]
Flat=blade and Phillips
[]
Tape measure
screwdrivers
[]
Drilland
%2" orsmallerbit
[]
Level
Through=the=Wall
Installation:
In addition
to the tools listed above,
the following
tools are
needed for through4he-waU
installation.
[]
Saw
[]
1" (2.Scm)
orthicker
lumber
[]
Wood preservative
[]
Caulk
[]
#10 x l"
wood
screws
(7)
IMPORTANT:
Observe all governing
codes
and ordinances.
Check the location
where air conditioner
will be installed.
Proper
installation
is your responsibility,
Make sure you have everything
necessary
(or correct
installation.
The location
should
provide:
[]
Grounded
electrical
outlet within
4 ft (I 22 cm) of where the
power
cord exits the air conditioner.
NOTE: Do not use an extension
cord.
[]
Free movement
of air in room
to be cooled.
[]
A large enough opening
for the air conditioner,
[]
Adequate
wallsupportforweightof
air conditioner.
Air
conditioner
weighs
between
70 and 851bs (32 to 40 kg),
NOTE: Cabinet
louvers must not be obstructed.
Air must be able
to pass freely through
the cabinet
louvers.
Parts Supplied (on
some
models)
Check that all parts are included in parts package.
C
B
E
F
H
G
A. Foam
window
sash
seal
B. Window
lock bracket
C. Side curtains
(2)
D. Foam seal
D
E.
#10x
7/2"
pan-head
Phillipsscrews
(3)
F. #10x
_"
round-head
screws
(6)
G. Top channel
H.
#10x
ΒΌ"
pan-head
Phillips
screws
(3)
A.
Cabinet
louvers
NOTE: Installation
parts are supplied
(or double-hung
windows
up to 36" (91.4 cm) wide. A special
Wide Window
Kitis
available
from your dealer or service center. See "Accessories."
NOTE:
DO NOT USE ANY SCREWS
OTHER THAN
THOSE SPECIFIED
HERE
PiN 2020213A0016
1