Epson 10600 Printer Guide

Epson 10600 - Stylus Pro Color Inkjet Printer Manual

Get Epson 10600 - Stylus Pro Color Inkjet Printer PDF manuals and user guides
UPC - 010343845510
View all Epson 10600 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson 10600 manual content summary:

  • Epson 10600 | Printer Guide - Page 1
    EPSON Stylus® Pro 10600 Series PRINTER GUIDE ®
  • Epson 10600 | Printer Guide - Page 2
    other printers. Trademarks EPSON, EPSON Stylus, ESC/P, and Micro Piezo are registered trademarks of SEIKO EPSON CORPORATION. DX3, PhotoEnhance, SelecType, EPSON Archival, EPSON Photographic Dye, EPSON UltraChrome, and EPSON Store are trademarks and EPSON Preferred is a service mark of Epson America
  • Epson 10600 | Printer Guide - Page 3
    to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
  • Epson 10600 | Printer Guide - Page 4
    Contents Introduction About Your Manuals 1 Options and Accessories 2 Where To Get Help 3 Macintosh System Requirements 4 Windows System Requirements 5 ENERGY STAR Compliance 6 Important Safety Instructions 6 Ink Cartridge Safety Instructions 7 1 Setting Up the Printer Unpacking and Assembly
  • Epson 10600 | Printer Guide - Page 5
    the Printer 2-24 Creating Custom Print Settings 2-25 Using the Printer Setting Menu 2-25 Using the Paper Configuration Menu 2-28 3 Printing with EPSON Drivers for Macintosh Choosing Page Setup Options 3-2 Choosing Basic Print Options 3-4 Choosing Advanced Print Options 3-6 Color Management
  • Epson 10600 | Printer Guide - Page 6
    Ink Levels 5-10 Ordering and Replacing Cartridges 5-11 Switching Between Black Ink Modes 5-15 Preparing the Required Supplies 5-15 Replacing the Black Ink Cartridge 5-17 Updating the Driver 5-18 Replacing the Paper Cutter Blade 5-20 Removing the Used Cutter Blade 5-20 Cleaning the Printer
  • Epson 10600 | Printer Guide - Page 7
    the Waste Ink System 5-27 6 Resolving Problems Diagnosing Problems 6-1 Using the Control Panel to Check the Printer 6-2 Improving Print Quality 6-4 Solving Operational Problems 6-7 Solving Miscellaneous Printing Problems 6-8 Solving Paper Problems 6-10 Solving Roll Paper Feed Problems 6-11
  • Epson 10600 | Printer Guide - Page 8
    your printer and provides troubleshooting tips in case you have a problem. For additional information: • The Quick Reference Guide provides a handy summary of procedures for daily use-loading paper, replacing ink cartridges, running cleaning cycles, aligning the print head, and clearing paper jams
  • Epson 10600 | Printer Guide - Page 9
    EPSON paper are listed on page 2-2 and for ink cartridges on page 5-11. Options and Accessories Your EPSON Stylus Pro 10600 printer offers these optional upgrades and accessories: Optional equipment and software Option EFI® Fiery® Spark Professional 2.0 Software RIP Automatic Take-Up Reel System
  • Epson 10600 | Printer Guide - Page 10
    the World Wide Web. You can reach EPSON Support at http://support.epson.com. At this site, you can download drivers and other files, look at product documentation, access troubleshooting information, and receive technical advice through e-mail. You can purchase ink cartridges, paper, and accessories
  • Epson 10600 | Printer Guide - Page 11
    8.5.1 on an iMac, Apple recommends that you download iMac Update 1.1 from their web site. Macintosh System Requirements To use your printer in either a standalone or peer-to-peer network environment, your system should include the requirements listed below: • For USB connection: Power Macintosh® G3
  • Epson 10600 | Printer Guide - Page 12
    a cable more than 6.6 ft. (2 meters) long-may cause the printer to malfunction. Windows System Requirements To use your printer in either a standalone or peer-to-peer network environment, your system should include the requirements listed below: • IBM®-compatible PC with a Pentium® III 500 MHz
  • Epson 10600 | Printer Guide - Page 13
    light is off. This ensures that the print head is safely capped. Important Safety Instructions Before using your printer, read the following safety instructions to make sure you use the equipment safely and effectively. • Turn off and unplug the printer before cleaning. Clean with a damp cloth only
  • Epson 10600 | Printer Guide - Page 14
    that are covered by the operating instructions. Ink Cartridge Safety Instructions • Do not put your hand inside the printer or touch the cartridges during printing. • To avoid damaging the printer, do not move the print head by hand. • Under normal circumstances, ink will not come out of the
  • Epson 10600 | Printer Guide - Page 15
    print head. • Install the ink cartridge immediately after you remove it from its package. Leaving the cartridge unpacked for a long time before use may result in reduced print quality. • Do not use an ink cartridge beyond the date printed on the cartridge package. For best results, use cartridges
  • Epson 10600 | Printer Guide - Page 16
    steps in this chapter to assemble the printer, install the software, and make any ink cartridges • Loading the roll paper • Connecting the printer to your computer • Installing the printer software • Optimizing print speed • Running a nozzle check • Aligning the print head • Setting up the printer
  • Epson 10600 | Printer Guide - Page 17
    Assembly Follow these steps to unpack and assemble your printer. Unpacking the Stand After unpacking the stand, make sure you have all these items: Upright supports Cross bar Metal rods, long Metal rods, short Allen wrench Paper basket Paper supports (10) Bolts Wing nuts and washers 1-2
  • Epson 10600 | Printer Guide - Page 18
    Setting Up the Printer | 1-3 Assembling the Stand 1. Insert the cross bar into one of the upright supports as shown. Then attach it with two bolts using the included Allen wrench. (Leave the bolts a little loose until you attach the other end.) Bolts 2. Attach the upright support to the other end.
  • Epson 10600 | Printer Guide - Page 19
    inch roll paper spindle 2-inch roll paper spindle with Doubleweight Matte Paper Roll paper belts for 2-inch roll paper Roll paper belts for 3-inch roll paper Ink cartridges (6) Printer UltraChrome model only: additional black ink cartridge and ink draining cartridge Label for ink compartment cover
  • Epson 10600 | Printer Guide - Page 20
    Setting Up the Printer | 1-5 Mounting the Printer on the Stand 1. Lock the two casters to keep the stand from rolling. Then extend the stabilizer knobs. 2. Orient the printer in relation to the stand as shown: 1-5
  • Epson 10600 | Printer Guide - Page 21
    3. Locate the recessed handles, two near each corner of the printer. Warning top view showing handle locations 4. Using four people, grasp the handles as shown, and set the printer on the stand: Do not attempt to lift the printer with fewer than four people. To avoid injuring your hands, you
  • Epson 10600 | Printer Guide - Page 22
    washer from the print head. Save these parts in case you need to ship the printer. Note When choosing a place for the printer, leave adequate room and unlock the casters. Then move the printer to its place of use. (The casters are meant for moving the printer only over a short distance.) Lock the
  • Epson 10600 | Printer Guide - Page 23
    1-8 | Setting Up the Printer Attaching the Basket 1. Attach the short metal rods to the upper guides: 2. Attach the long metal rods to the lower guides: 3. Turn the basket so its seams face downward, and spread it on the floor. rear front 1-8
  • Epson 10600 | Printer Guide - Page 24
    Setting Up the Printer | 1-9 4. Pass the rear part of the basket under the printer. Rotate the bar one revolution so that the fabric folds around the bar. Then insert its plastic pins into the stand as shown. 5. Slide out
  • Epson 10600 | Printer Guide - Page 25
    1-10 | Setting Up the Printer 7. Hold the front bar and turn it one revolution. Then attach it to the lower metal rods. 8. Push the upper and lower metal rods all the way in. 9. To use the paper supports, hang them along the inside of the basket. Hang paper supports at even intervals as shown 10.
  • Epson 10600 | Printer Guide - Page 26
    Power Cord 1. Connect the power cord to the AC inlet on the back of the printer. Do not use an outlet that is controlled by an automatic timer or wall switch. Otherwise, you may accidentally shut off the printer and cause damage. 2. Route the power cord through the three cable clips and fasten
  • Epson 10600 | Printer Guide - Page 27
    ™ ink • EPSON Archival™ ink • EPSON UltraChrome™ ink Once you install your first ink cartridges, the printer is programmed to work with that kind of ink for the lifetime of the unit; you cannot switch it to use a different kind of ink. If you have an EPSON Stylus Pro 10600 that uses UltraChrome ink
  • Epson 10600 | Printer Guide - Page 28
    Setting Up the Printer | 1-13 Before you begin, make sure the printer is plugged into a grounded outlet. Then follow these steps to install the cartridges: 1. Press the P Power button to turn on the printer. 2. Push and release the ink compartment cover to open it. 1-13
  • Epson 10600 | Printer Guide - Page 29
    top of the first cartridge clamp and pull it forward. Note If you have an UltraChrome printer, be sure to install your preferred black ink type. See page 1-12. 5. Locate the package for the black ink cartridge and open it. If you're using Archival or UltraChrome ink, shake the cartridge gently, as
  • Epson 10600 | Printer Guide - Page 30
    position of the paper set lever, or open the lower cover or ink compartment cover while the printer is charging ink. 8. Repeat step 4 through step 7 for the other ink cartridges. When you're done, close the ink compartment cover. The printer begins charging the ink delivery system. The Pause light
  • Epson 10600 | Printer Guide - Page 31
    . (It should already be loaded onto the 2-inch spindle.) You can use this Doubleweight Matte Paper to print the test patterns described later in this chapter. Follow these steps to load it in the printer: 1. Open the printer's roll paper cover. 2. Insert the white end into the right mounting bracket
  • Epson 10600 | Printer Guide - Page 32
    the Printer | 1-17 3. Place the black end of the spindle into the corresponding left mounting bracket. 4. Press the Paper Source button on the control panel until the Roll Auto Cut light comes on. Note To avoid feeding excess paper, make sure you don't select Sheet when you're using roll paper. 1-17
  • Epson 10600 | Printer Guide - Page 33
    1-18 | Setting Up the Printer 5. Pull the paper set lever out, to the released position. The Paper Out light on the control panel comes on and LOAD PAPER appears on the control panel display. 6. Feed the paper into the paper slot. You hear the paper suction fans come on. 1-18
  • Epson 10600 | Printer Guide - Page 34
    Setting Up the Printer | 1-19 7. If you're using the roll paper that came with the printer, decrease the suction by pressing the Paper Feed - button. This makes is easier to feed lighter-weight papers. 8. Pull the paper down so it extends all the way through the slot. 1-19
  • Epson 10600 | Printer Guide - Page 35
    on the control panel display. Caution To avoid damaging the printer, never move the paper set lever while the Operate or Pause light is flashing. 11. Press the Pause button. The print head moves and the paper feeds into printing position automatically. READY appears on the control panel display
  • Epson 10600 | Printer Guide - Page 36
    Ethernet port For fastest print speeds, EPSON recommends connecting using FireWire or USB, especially when printing with a third-party RIP station or directly from your computer. If you're using FireWire, two ports are included so you can daisy-chain multiple printers to your system and keep them
  • Epson 10600 | Printer Guide - Page 37
    Note If the printer doesn't work when you attach it to a first tier USB hub port, connect it directly to the USB port on your computer. 3. Connect the end of the USB cable to your computer's USB port or a first tier USB hub port. When done, continue with the instructions on page
  • Epson 10600 | Printer Guide - Page 38
    | 1-23 Connecting to the Parallel Port (Windows Only) To use the printer's built-in parallel interface, you need a shielded, bidirectional, parallel cable. Follow the steps below to connect the printer to your computer: 1. Make sure both the printer and your computer are turned off. 2. Plug the
  • Epson 10600 | Printer Guide - Page 39
    both the printer and your computer are turned off. 2. Connect one end of the IEEE 1394 cable to one of the IEEE 1394 ports on the back of your printer. 3. Connect the other end of the IEEE 1394 cable to your computer's IEEE 1394 port. When done, continue with the instructions on page
  • Epson 10600 | Printer Guide - Page 40
    connect the printer using its Ethernet port, you need a 10/100 Ethernet cable. Follow the steps below to connect the printer. 1. Make sure the printer is turned off see page 1-41 for instructions on configuring your client systems and to finish setting up the printer. If you're connecting directly to
  • Epson 10600 | Printer Guide - Page 41
    If necessary, double-click the EPSON CD-ROM to open its window. 3. Double-click the icon. 4. Double-click the menu option for your printer. Be sure to select the correct ink type (Archival Ink, Photographic Dye Ink, or UltraChrome Ink). Select the correct ink type for your printer 5. At the first
  • Epson 10600 | Printer Guide - Page 42
    the Desktop Printing option. Note The on-screen Reference Guide provides additional information about the printer, drivers, and utility software. 7. Click the Install button, then click Continue on the next screen. 8. Follow the instructions to install your software and select a default paper size
  • Epson 10600 | Printer Guide - Page 43
    on Background Printing if you want to use your Macintosh while it's preparing a document for printing, and use the EPSON Monitor3 utility to manage print jobs. 14. Close the Chooser. If you're connecting the printer directly to your computer (not over a network), continue with the instructions on
  • Epson 10600 | Printer Guide - Page 44
    ink type (Archival Ink, Photographic Dye Ink, or UltraChrome Ink). Select the correct ink type for your printer 5. If you're connecting with FireWire: You may see a New Hardware Found screen. If so, click Next and follow the instructions on page 1-32 to configure the EPSON 1394 Printer (FireWire
  • Epson 10600 | Printer Guide - Page 45
    , press the P Power button. Then go to step 9. Windows XP: • When you see a window asking you to turn on your printer, press the P Power button. • Wait until you see the Found New Hardware Wizard for the Stylus Pro 10600. • Once the Found New Hardware Wizard appears, select Install the software
  • Epson 10600 | Printer Guide - Page 46
    . • At the main menu screen, select Reference Guide. • Select Install Reference Guide and follow the on-screen instructions to finish installing it. • When done, close any open windows and remove the CD-ROM. If you're connecting the printer directly to your computer (not over a network), continue
  • Epson 10600 | Printer Guide - Page 47
    correct Win2K_XP folder on the EPSON CD-ROM: • If your printer uses Archival ink, browse to the Drivers\Cf\Win2K_XP folder • If you're printer uses Photographic Dye, browse to the Drivers\Dye\Win2K_XP folder • If you're printer uses UltraChrome ink, browse to the Drivers\Uc\Win2K_XP folder 5. Click
  • Epson 10600 | Printer Guide - Page 48
    the Printer | 1-33 Optimizing Print Speed Depending on your system, you may be able to optimize your print speed as described in these sections: • If you're printing with the standard EPSON driver software, see "Using the Photo Printing Accelerator" (below) • If you're printing from Windows through
  • Epson 10600 | Printer Guide - Page 49
    Up the Printer Using the Speed & Progress Utility If you're printing from Windows through a parallel port, you can optimize your computer for the fastest data transfer rate and speed up the way your printer driver processes multiple-copy print jobs. 1. Do one of the following: • Windows XP: Click
  • Epson 10600 | Printer Guide - Page 50
    printer port for EPSON printers instead of using the Windows default printer port. You may see one of these messages beneath the EPSON Printer printing by enabling DMA transfers on your system. See your electronic Reference Guide for instructions on using DMA transfers, if your computer supports
  • Epson 10600 | Printer Guide - Page 51
    check on any kind of paper. If you use the Doubleweight Matte Paper that came with your printer, you'll be able to save your higher-quality paper for actual print jobs.) 2. Do one of the following: Macintosh: Open an application and select Print from the File menu. Windows: Click Start, point to
  • Epson 10600 | Printer Guide - Page 52
    missing dots, as shown below; in addition, all the dots should be in place and not deflected. (You may need to use an eye loupe to check the pattern.) 6. If the pattern is complete, click Finish and close the Utility menu, then continue on to "Aligning the Print Head" on page 1-39. 1-37
  • Epson 10600 | Printer Guide - Page 53
    the instructions on screen to clean the print head. Cleaning takes about 60 seconds, during which the printer makes some noise and the Pause light flashes. 8. When the Pause light goes off, make sure paper is loaded in the printer, then: Macintosh: Click Confirmation, then click Next. Windows: Click
  • Epson 10600 | Printer Guide - Page 54
    first, as instructed, before performing the Bi-D alignment. You may have to perform each alignment more than once for best results. Note You must use at least a 10× eye loupe to check the pattern. Aligning the Print Head Before you use the printer, you should align the print head to ensure
  • Epson 10600 | Printer Guide - Page 55
    but the printed pattern is different: Number 8 is the best choice To select the best pattern, use an eye loupe to determine which block has the smallest gaps. In the example above, number 8 has the smallest gaps. Once this adjustment is done, you've finished setting up your Stylus Pro 10600. 1-40
  • Epson 10600 | Printer Guide - Page 56
    Network" on page 1-43 • "Setting Up on a Windows XP Network" on page 1-46 • "Setting Up on a Windows NT 4.0 or Windows 2000 Network" on page 1-49 Setting Up on a Macintosh Network This section explains how to set up the Stylus Pro 10600 as a shared printer on an AppleTalk network. First install the
  • Epson 10600 | Printer Guide - Page 57
    radio button to turn Background Printing on. 3. Click the Setup button. You see the following dialog box. 4. Check Share this Printer, then type a name for the printer and password information as needed. 5. Click OK. The name of the shared printer appears in the port list in the Chooser. 6. Close
  • Epson 10600 | Printer Guide - Page 58
    the control panel, as described on page 5-4. • Perform a print head alignment from the control panel, as described on page 5-7. Note This section tells you how to configure your printer as a shared printer on a network. To connect your printer directly to a network without setting it up as a shared
  • Epson 10600 | Printer Guide - Page 59
    Select the I want to be able to allow others to print to my printer(s) check box and click OK. 5. In the Network window, click OK. 6. In the Control Panel, double-click Printers. 7. Right-click your printer icon, then select Sharing (or Properties for Windows 95). You see a dialog box similar to the
  • Epson 10600 | Printer Guide - Page 60
    click the printer's icon. 7. Click OK and follow the messages on the screen to complete configuration. When done setting up your network connection, be sure to complete the following: • Run a nozzle check from the control panel, as described on page 5-4. • Perform a print head alignment from the
  • Epson 10600 | Printer Guide - Page 61
    : 1. Click Start, then select Control Panel. Click Printers and Hardware, then Printers and Faxes. 2. Right-click the icon for your printer, then click Sharing. 3. If the following menu appears, click one of the listed options, then follow the instructions on screen to set up your network as needed
  • Epson 10600 | Printer Guide - Page 62
    | 1-47 4. When done, you see the following screen. Select Share this printer, then type the name of the shared printer as shown. (Do not choose any drivers from the Additional Drivers list.) 5. Click OK. Configuring the Client Computers Perform these steps on every computer that will need to access
  • Epson 10600 | Printer Guide - Page 63
    click the printer's icon. 7. Click OK and follow the messages on the screen to complete configuration. When done setting up your network connection, be sure to complete the following: • Run a nozzle check from the control panel, as described on page 5-4. • Perform a print head alignment from the
  • Epson 10600 | Printer Guide - Page 64
    Sharing from the File menu. You see a window like the following: 3. Click the Shared (Windows NT) or Shared as (Windows 2000) button and enter a share name for the printer. Don't select any drivers from the Alternate Drivers (Windows NT) or Additional Drivers (Windows 2000) list. 4. Click OK. 1-49
  • Epson 10600 | Printer Guide - Page 65
    the Client Computers Perform these steps on every computer that will need to access the printer: 1. Click Start, point to Settings, and click Printers. 2. Right-click your printer icon, then click Properties (Document Defaults for Windows NT). 3. Click the Ports tab to display the following
  • Epson 10600 | Printer Guide - Page 66
    its checkbox is selected. Then click OK. Before printing, be sure to test the printer as described in the following sections and perform any needed adjustments: • Run a nozzle check from the control panel, as described on page 5-4. • Perform a print head alignment, as described on page 1-39. 1-51
  • Epson 10600 | Printer Guide - Page 67
    1-52 | Setting Up the Printer 1-52
  • Epson 10600 | Printer Guide - Page 68
    The EPSON Stylus Pro 10600 prints on a variety of media, including roll paper and cut sheets up to 44 inches wide. You can also use heavy stock, including posterboard up to 59 mil (1.5 mm) thick. This chapter includes the following information: • Selecting paper for your printer • Printing on EPSON
  • Epson 10600 | Printer Guide - Page 69
    a good idea to test samples of paper in the printer before purchasing large quantities or printing large jobs. When you use non-EPSON papers or other media, you may need to "profile" their thickness and ink drying time. See page 2-29 for instructions. Paper Handling Guidelines Always follow these
  • Epson 10600 | Printer Guide - Page 70
    . Always test samples of paper before purchasing large quantities or running large print jobs in order to be sure it meets your needs. EPSON papers for the Stylus Pro 10600 Paper type Roll sizes Sheet sizes Compatible ink Photographic Dye Archival ink UltraChrome ink Premium Glossy Photo
  • Epson 10600 | Printer Guide - Page 71
    | Using Paper and Other Media EPSON papers for the Stylus Pro 10600 (cont.) Paper type Roll sizes Sheet sizes Compatible ink Photographic Dye Archival ink UltraChrome ink Photo Glossy Paper 44-inch roll: SP91002 - 36-inch roll: SP91001 24-inch roll: SP91021    Photo Semigloss Paper 44
  • Epson 10600 | Printer Guide - Page 72
    Using Paper and Other Media | 2-5 EPSON papers for the Stylus Pro 10600 (cont.) Paper type Roll sizes Sheet sizes Compatible ink Photographic Dye Archival ink UltraChrome ink Matte Paper - Heavyweight Enhanced Matte Posterboard EPSON Proofing Paper Commercial Semimatte DuPont®/EPSON
  • Epson 10600 | Printer Guide - Page 73
    Using Paper and Other Media EPSON papers for the Stylus Pro 10600 (cont.) Paper type Roll sizes Sheet sizes Compatible ink Photographic Dye Archival ink UltraChrome ink EPSON Velvet Fine Art Paper* Somerset Velvet for EPSON Fine Art Paper spindle ** Requires optional 2-inch high-tension
  • Epson 10600 | Printer Guide - Page 74
    Setting When you print, it's important to select an appropriate Media Type setting for the type of paper you're using. The tables on the following pages list recommended settings for many EPSON papers, depending on whether your printer uses Photographic Dye, Archival ink, or UltraChrome ink. In some
  • Epson 10600 | Printer Guide - Page 75
    Media TIP If your EPSON paper is not listed, check the instructions included with the paper, or look on the EPSON web site (http:// prographics.epson.com). Select these settings if your printer uses Photographic Dye: Media Type settings when printing with Photographic Dye ink Product name Media
  • Epson 10600 | Printer Guide - Page 76
    you can use to achieve higher color density (Archival ink only): • Media-1, Media-2, and Media-3 let you print with higher ink density on selected outdoor media. This results in a richer, brighter color gamut for your prints. Each of these media types is optimized for use with certain EPSON media
  • Epson 10600 | Printer Guide - Page 77
    Use these settings when printing with UltraChrome ink: Media Type settings when printing with UltraChrome ink Paper type Media Type setting Premium Glossy Photo Paper (250) PREMIUM GLOSSY PHOTO PAPER (250) Premium Luster Photo Paper PREMIUM LUSTER PHOTO PAPER Premium Semigloss Photo Paper
  • Epson 10600 | Printer Guide - Page 78
    paper from unrolling during use. Other options for using roll paper include the Automatic Take-up Reel System (see your online Reference Guide for operating instructions) and the Manual Media Cutting System (for use with heavy media). Loading Paper onto the Spindle To load roll paper onto a spindle
  • Epson 10600 | Printer Guide - Page 79
    the lower roll. Be sure to wrap one of the roll paper belts around the roll you're not using. See page 2-18. Loading Roll Paper for Printing Once roll paper is placed on the spindle, follow these steps to load it in the printer: 1. Open the printer's roll paper cover. 2. Insert the white end of the
  • Epson 10600 | Printer Guide - Page 80
    • Posterboard Semigloss • Velvet Fine Art Paper • Somerset Velvet for EPSON Fine Art Paper • Smooth Fine Art Paper • Textured Fine Art Paper • Adhesive Vinyl • Canvas When done printing, cut the paper manually using scissors or the optional Manual Media Cutting System (see page 2 for ordering
  • Epson 10600 | Printer Guide - Page 81
    fans come on. 7. If you're loading heavy paper, you may need to increase the suction strength by pressing the Paper Feed + button. This helps hold the paper in place during loading and printing. For lightweight paper, decrease the suction by pressing the Paper Feed - button. This makes it easier to
  • Epson 10600 | Printer Guide - Page 82
    Using Paper and Other Media | 2-15 8. Pull the paper down so it extends all the way through the slot. 9. Turn the roll back to remove any slack. Then align the paper with the two rows of holes at the paper exit. 2-15
  • Epson 10600 | Printer Guide - Page 83
    on the control panel display. Caution To avoid damaging the printer, never move the paper set lever while the Operate or Pause light is flashing. 11. Press the Pause button. The print head moves and the paper feeds into printing position automatically. READY appears on the control panel display
  • Epson 10600 | Printer Guide - Page 84
    • Always choose an appropriate Media Type setting in your printer software before you send your job. See page 2-7 for instructions. If you're printing on non-EPSON paper, or on a paper type not supported by the driver, you may need to use the Paper Configuration menu to obtain the best results. See
  • Epson 10600 | Printer Guide - Page 85
    2-18 | Using Paper and Other Media Caution To avoid damaging the printer, never move the paper set lever while the Operate or Pause light is flashing. Removing Unused Roll Paper Once your printouts are removed from the printer, follow these steps to remove any unused paper: 1. Pull the paper set
  • Epson 10600 | Printer Guide - Page 86
    .2 inches. You can leave your roll paper in the printer when you print on cut sheets; just make sure it's rolled up and fastened with the roll paper belt(s), as described on page 2-18. If you're using stock more than 19 mil (0.5 mm) thick, see page 2-20 for instructions. You will not be able to
  • Epson 10600 | Printer Guide - Page 87
    the print head. Printing on Posterboard You can print on heavy stock up to 44 × 62.2 inches, such as EPSON Posterboard Semigloss (available in sizes up to 28 × 40 inches). Follow these instructions when you print on posterboard or other media more than 19 mil (0.5 mm) thick. 1. Set the paper basket
  • Epson 10600 | Printer Guide - Page 88
    position. Then open the lower cover. (The cover has tabs that support the posterboard.) Note If you're using stock more than 39 inches long, load it long edge first (in landscape orientation). 5. Feed the posterboard into the paper slot until it meets resistance. 6. Align the board with the scale
  • Epson 10600 | Printer Guide - Page 89
    panel display. To avoid damaging the printer, never move the paper set lever while the Operate or Pause light is flashing. Note If print quality is not satisfactory, you may need to adjust the platen gap. See page 2-25. 8. Press the Pause button. The print head moves and the board feeds into
  • Epson 10600 | Printer Guide - Page 90
    and Other Media | 2-23 Note When you print on posterboard, set the basket to catch printouts in front of the printer. Using the Paper Basket The paper basket is a cloth sheet that attaches to your printer and catches your printouts as they come out. This keeps the printouts from getting dirty
  • Epson 10600 | Printer Guide - Page 91
    floor. Make sure the surface of the basket is stretched taut. If there is any slack, the paper may not slide properly to the floor. Catching Printouts Under the Printer To catch printouts under the printer, push the lower rods all the way in. Then extend the upper rods all the way out
  • Epson 10600 | Printer Guide - Page 92
    . This physically moves the print head closer to or farther from the paper. Normally, the AUTO setting allows the printer to adjust automatically. However, if print quality is not satisfactory when you use paper of unusual thickness, change this setting to NARROW or WIDE, as needed. Follow these
  • Epson 10600 | Printer Guide - Page 93
    re using the EPSON printer driver, you can also specify trim lines through your print options. See page 3-3 (Macintosh) or page 4-6 (Windows) for more information. Note Print quality may be affected near the cut edges if you change the top and bottom margins to 3 mm. Controlling Roll Paper Margins
  • Epson 10600 | Printer Guide - Page 94
    Off Paper Monitoring The printer normally stops and displays an error message if you try to print an image wider than the paper, or if paper is fed at an angle. You can turn off the paper size check and/or paper alignment check if you don't want to use these monitoring features. However, ink may
  • Epson 10600 | Printer Guide - Page 95
    want to fine-tune how the printer handles various papers-especially if you use non-EPSON paper, a paper not supported by the driver, or if you're printing from a third-party RIP station. You can use the printer's Paper Configuration menu to create customized settings for your paper. If you want the
  • Epson 10600 | Printer Guide - Page 96
    keep a list of your registered paper types and numbers. Saving Your Settings You can create up to 10 groups of settings, one for each type of paper you want to use. When doing so, you can also profile your paper's thickness. Then you can easily select your customized settings whenever you print on
  • Epson 10600 | Printer Guide - Page 97
    the Item button to select any of the menu options listed in the table on page 2-28. 8. Use the + or - button to make any necessary changes, then press Enter to save your new setting. 9. Press the Pause or SelecType button to exit the Paper Configuration menu. Once you have created your customized
  • Epson 10600 | Printer Guide - Page 98
    EPSON Stylus Pro 10600 comes with drivers and utilities that let you Printing with EPSON Drivers print and manage print jobs in non-PostScript® mode without a RIP. ICC profiles for ColorSync® 3.x are included, so you can use advanced color management features from your applications or the driver
  • Epson 10600 | Printer Guide - Page 99
    3-2 | Printing with EPSON Drivers for Macintosh Note Many application settings override the printer's page setup options. Always verify settings to get the results you expect. If you need more information about print options, click the ? button on any dialog box. Choosing Page Setup Options Many
  • Epson 10600 | Printer Guide - Page 100
    Printing with EPSON Drivers for Macintosh | 3-3 Note These settings override settings made through the control panel. Note Select Landscape only if you want to rotate your image 90°. 3. Select the type of paper you loaded (Roll Paper or Sheet) from the Paper Source list. If your image is more than
  • Epson 10600 | Printer Guide - Page 101
    setting for the type of image you're printing: • For color photographic images, select Color (if you have a Photographic Dye or Archival ink printer) or Color/B&W Photo (if you have an UltraChrome ink printer). • Select Black only if you're printing line drawings or other non-photographic images
  • Epson 10600 | Printer Guide - Page 102
    of the print head and paper. Available only when you choose photo or photo-quality media types. Text/Graph Intensifies colors and lightens the midtones and highlights. Best for print jobs with nonphotographic images. ColorSync Adjusts colors based on your printer's ICC profile, using the
  • Epson 10600 | Printer Guide - Page 103
    3-6 | Printing with EPSON Drivers for Macintosh 7. Choose from the following buttons to access additional features: • Click to access the printer monitoring and maintenance utilities. See page 3-14 for more information about the Status Monitor utility. See Chapter 6 for details about the maintenance
  • Epson 10600 | Printer Guide - Page 104
    Printing with EPSON Drivers for Macintosh | 3-7 Note Leave Photo Printing Accelerator turned on. See page 1-33 for details. 3. If necessary, you can change your Media Type and Ink settings. 4. Choose one of the following Print Quality settings: • Normal - 360dpi For faster printing and everyday
  • Epson 10600 | Printer Guide - Page 105
    3-8 | Printing with EPSON Drivers for Macintosh TIP If you turn off color management, you can still control the ink density. See "Paper Configuration Options" on page 3-10. 6. Choose one of the following Color Management settings: • Color Controls Lets you specify individual values for adjusting
  • Epson 10600 | Printer Guide - Page 106
    be displayed. The EPSON printer driver was designed to represent color accurately when prints are illuminated with a D50 (daylight) light source. For optimum results, understand your output display conditions before printing. PhotoEnhance4 is designed to enhance images captured using video cameras
  • Epson 10600 | Printer Guide - Page 107
    may have made using the printer's control panel (page 2-28). Paper Configuration settings Color Density Use this to control the ink saturation level (for example, when you turn off color management in your printer software). Drying Time per Print Head Pass You can make the print head wait up to
  • Epson 10600 | Printer Guide - Page 108
    Printing with EPSON Drivers for Macintosh | 3-11 Managing Print Jobs Your printer comes with several utilities that let you check on your print jobs and schedule, cancel, pause, or restart them. First you need to set up background printing, so you can continue to work on your Macintosh while a file
  • Epson 10600 | Printer Guide - Page 109
    is spooled, but held in the print queue until the print time specified or until released using Monitor3, as described in the following section. Note You must turn on background printing to view the EPSON Monitor3 window. See page 3-11 for instructions. Using Monitor3 The Monitor3 utility lets you
  • Epson 10600 | Printer Guide - Page 110
    Printing with EPSON Drivers for Macintosh | 3-13 You can also do the following: • Double-click a file in the list to preview it • Double-click Copies to change the number of copies to be printed • Click to check your ink levels • Click to start the print head cleaning utility. See page 5-4 for more
  • Epson 10600 | Printer Guide - Page 111
    3-14 | Printing with EPSON Drivers for Macintosh Cancelling Printing If you need to cancel a print job, follow these steps: 1. Press the Power button to turn off the printer. 2. Do one of the following, depending on whether you're using background printing: • If background printing is turned off,
  • Epson 10600 | Printer Guide - Page 112
    Printing with EPSON Drivers for Macintosh | 3-15 2. Click the EPSON StatusMonitor icon. The software checks the amount of ink remaining in the printer and displays the Status Monitor window: Click for information about each cartridge Click to recheck ink levels 3. To view information about a
  • Epson 10600 | Printer Guide - Page 113
    on its hard drive and then sends it to the printer as a whole (recommended only for older Macintosh systems). • The last two checkboxes let you choose to have your software check for errors or low ink levels before starting your print job. 4. When you're finishing changing your configuration options
  • Epson 10600 | Printer Guide - Page 114
    4: Your Stylus Pro 10600 comes with drivers and utilities that let you print and Printing with EPSON Drivers manage print jobs without a RIP. ICC profiles are included, so you can use the advanced color management features of your applications or the driver itself. for Windows This chapter
  • Epson 10600 | Printer Guide - Page 115
    for Windows Choosing Basic Print Options Before you print, you need to set basic printing properties. The EPSON driver offers automatic settings that optimize print quality and speed when you're using EPSON media. You can also choose advanced settings for more control over your printer and color
  • Epson 10600 | Printer Guide - Page 116
    Printing with EPSON Drivers for Windows | 4-3 4. For the ink type, select the correct setting for the type of image you're printing: • For color photographic images, select Color (if you have a Photographic Dye or Archival ink printer) or Color/B&W Photo (if you have an UltraChrome ink printer). •
  • Epson 10600 | Printer Guide - Page 117
    images. ICM Adjusts colors based on your printer's ICC profile, using the Image Color Matching system (effective in Windows 98/Me/2000/XP only). If you're using an ICM-compatible monitor, adjusts printed colors to closely match screen colors. sRGB Adjusts colors using the small-gamut sRGB
  • Epson 10600 | Printer Guide - Page 118
    Printing with EPSON Drivers for Windows | 4-5 Note Many application settings override settings in the printer driver. Always verify settings to get the results you expect. Choosing Paper and Layout Options Many paper options correspond to paper handling features that you can also set through the
  • Epson 10600 | Printer Guide - Page 119
    4-6 | Printing with EPSON Drivers for Windows Note These settings override settings made through the control panel. Note Select Landscape only if you want to rotate your image 90°. 4. When you're using roll paper, set the following options: • Auto Rotate Saves paper if your document length is
  • Epson 10600 | Printer Guide - Page 120
    Printing with EPSON Drivers for Windows | 4-7 Choosing Advanced Print Options For complete control over your printing environment, use these Advanced you choose PhotoEnhance4, you see a different set of options on the lower part of the screen Note Some of these options may not appear, depending on
  • Epson 10600 | Printer Guide - Page 121
    4-8 | Printing with EPSON Drivers for Windows Note Leave Photo Printing Accelerator turned on. See page 1-33 for details. TIP If you turn off color management, you can still control the ink density. See "Paper Configuration Settings" on page 4-10. 5. Choose any of the following: • Super MicroWeave
  • Epson 10600 | Printer Guide - Page 122
    be displayed. The EPSON printer driver was designed to represent color accurately when prints are illuminated with a D50 (daylight) light source. For optimum results, understand your output display conditions before printing. PhotoEnhance4 is designed to enhance images captured using video cameras
  • Epson 10600 | Printer Guide - Page 123
    you may have made using the printer's control panel (page 2-28). Paper Configuration settings Color Density Controls the ink saturation level (for example, when you turn off color management in your printer software). Drying Time per Print Head Pass You can make the print head wait up to
  • Epson 10600 | Printer Guide - Page 124
    Printing with EPSON Drivers for Windows | 4-11 Managing Print Jobs Your printer comes with several utilities that let you check on your print jobs and schedule, cancel, pause, or restart them. The Progress Meter opens each time you send a print job. The Spool Manager (not available with Windows NT)
  • Epson 10600 | Printer Guide - Page 125
    4-12 | Printing with EPSON Drivers for Windows Using the Spool Manager The Spool Manager (not available with Windows NT) displays the status of your print job files and lets you control them. To open the Spool Manager while you're printing, click the EPSON Stylus Pro 10600 icon that appears on the
  • Epson 10600 | Printer Guide - Page 126
    Printing with EPSON Drivers for Windows | 4-13 1. To open Status Monitor 3 from an application, access the Properties dialog box, as described on page 4-2. Otherwise, do the following: • Windows XP: Click Start and select Control Panel. Double-click Printers and Other Hardware, then double-click
  • Epson 10600 | Printer Guide - Page 127
    the EPSON Status Monitor 3 button. The following window appears. (It also opens automatically when an error occurs.) If there's a printing problem, such as low ink or jammed paper, Status Monitor 3 displays a How To button that you can click for instructions on solving the problem. Printer status
  • Epson 10600 | Printer Guide - Page 128
    Printing with EPSON Drivers for Windows | 4-15 2. Click the Utility tab, then click the Speed & Progress button. You see the Speed & Progress dialog box. (See page 1-34 for more information Note about using the Speed & Progress utility.) If you want, you can click the Show Progress Meter
  • Epson 10600 | Printer Guide - Page 129
    | Printing with EPSON Drivers for Windows 5. If you want to have the Status Monitor 3 icon appear in your Windows taskbar, click the Shortcut Icon checkbox. Then select the icon you want to use. After you enable the shortcut, you can simply double-click the icon to open the Status Monitor 3 window
  • Epson 10600 | Printer Guide - Page 130
    procedures: • Checking printer status and part life • Running a cleaning cycle • Aligning the print head • Replacing ink cartridges • Switching between black ink modes • Replacing the paper cutter blade • Cleaning the printer • Transporting or storing the printer • Replacing the waste ink system 1
  • Epson 10600 | Printer Guide - Page 131
    | Maintaining and Transporting the Printer Checking Printer Status and Part Life Using the control panel, you can check the amount of ink remaining, the total number of prints, and the status of your cutter blade, maintenance tank, and other printer parts. You can either print out a status check, or
  • Epson 10600 | Printer Guide - Page 132
    all parts on the list (except the ink cartridges and paper cutter) need to be replaced by authorized EPSON service centers. INK LEFT-K (black) JOB HISTORY INK LEFT-C (cyan) CLEAR JOB H (clear job history) INK LEFT-M (magenta) TOTAL PRINTS INK LEFT-LC (light cyan) WASTE INK (waste ink system
  • Epson 10600 | Printer Guide - Page 133
    and Transporting the Printer Running a Cleaning Cycle If your printed image is unexpectedly light or faint or dots are missing from the image, you may need to run a cleaning cycle. This unclogs the print head nozzles so they can deliver ink properly. The cleaning cycle uses ink, so you should
  • Epson 10600 | Printer Guide - Page 134
    to replace the corresponding ink cartridge instead. See page 5-10 for instructions. 3. Press the Cleaning button and hold it for at least 3 seconds. The Pause light flashes as the printer cleans its print head. The cleaning cycle takes about 60 seconds and does not use any paper. 4. When the Pause
  • Epson 10600 | Printer Guide - Page 135
    5-4) to verify that the nozzles are clean. You may have to repeat the SSCL cleaning cycle to fully solve the problem. If after repeated cleanings the same color nozzles continue to be clogged, you may need to replace the print head. Contact EPSON for assistance (see page 3 in the Introduction). 5-6
  • Epson 10600 | Printer Guide - Page 136
    the print head. Be sure to perform a Uni-D (uni-directional) alignment first, as instructed, before performing the Bi-D alignment. You may have to perform each alignment more than once for best results. 1. Turn on the printer. 2. Load 44-inch wide roll paper in the printer (you can use the roll
  • Epson 10600 | Printer Guide - Page 137
    paper. Use your own eye loupe or the one that came with the printer to determine which line is the best. (Each line is composed of two overlapping colors. Look for the line in which the colors . 12. When done, press the Pause button to exit the head alignment. 13. If you had to make changes to any of
  • Epson 10600 | Printer Guide - Page 138
    Maintaining and Transporting the Printer | 5-9 Note If you're performing a Bi-D ALL adjustment, Bi-D ALL). The process is exactly the same, but the printed pattern is different: Number 8 is the best choice To select the best pattern, use an eye loupe to determine which block has the smallest gaps.
  • Epson 10600 | Printer Guide - Page 139
    Transporting the Printer Replacing Ink Cartridges Before you begin a large print job, you should check your ink levels as described below. If one of your cartridges is low, you can replace it before you start. Or you can wait until the ink runs out, replace the cartridge, and resume printing without
  • Epson 10600 | Printer Guide - Page 140
    initialized the printer to use either Photographic Dye, Archival ink, or UltraChrome ink. Be sure you replace the cartridges with the same type, or you will see an error message and your printer won't work until you insert the correct cartridges. Use the following EPSON ink cartridges before the
  • Epson 10600 | Printer Guide - Page 141
    Before you start, make sure the printer is on. Then follow these steps to replace an ink cartridge: 1. Note the color of the Ink Out light that is on or flashing. This is the cartridge that you need to replace. 2. Push the indentation on the ink compartment cover to release the lock and open the
  • Epson 10600 | Printer Guide - Page 142
    not to touch the green computer chip on the cartridge. This may affect normal operation and printing. 5. Make sure the replacement cartridge is the correct color, and remove it from its package. If you're using Archival ink or UltraChrome ink, shake the cartridge gently before installing it. 5-13
  • Epson 10600 | Printer Guide - Page 143
    smoothly, you may have the wrong cartridge. Check the package and product code. 6. Hold the ink cartridge with the arrow mark on the left side and pointing toward the printer. Then insert the ink cartridge into the slot. Don't force the cartridge. 7. Push the cartridge clamp back up. Make sure the
  • Epson 10600 | Printer Guide - Page 144
    If your printer uses EPSON UltraChrome ink, you can switch between black ink modes to optimize your black ink density. When you installed the printer's first cartridges, the printer was initialized to use either Photo Black ink or Matte Black ink (according to your choice). If your printing needs
  • Epson 10600 | Printer Guide - Page 145
    be limited in how much you can print after switching black ink modes. See page 5-11 for ink cartridge part numbers. If the printer's waste ink tank is full, you'll need to have it replaced as well. Use the printer's control panel to check the tank: 1. Press the SelecType button until MAINTENANCE
  • Epson 10600 | Printer Guide - Page 146
    and remove the black ink cartridge. (Press down on the top of the cartridge clamp to release it, then pull out the cartridge.) 5. Insert the draining cartridge into the black ink slot. Close the ink cartridge clamp, then close the cover. The printer begins draining the ink, and you see a message
  • Epson 10600 | Printer Guide - Page 147
    . When done, K: EPSON GENUINE INK is displayed. Continue on to the next section to update your printer driver software. Updating the Driver Once you have switched black ink modes, you need to update the driver (printer software) so that it knows which black ink mode you're using. Follow these steps
  • Epson 10600 | Printer Guide - Page 148
    and Transporting the Printer | 5-19 Windows Users 1. Click the Main tab in your printer software and make sure the correct ink cartridge information is displayed, as shown below. 2. If necessary, set the information manually. Click the Utility tab, then click the Printer and Option Information
  • Epson 10600 | Printer Guide - Page 149
    check the status of your cutter by printing the status check sheet or using the Printer Status menu on the control panel. See page 5-2 for instructions. You can obtain a new cutter blade (part number C12C815271) from EPSON at (800) 873-7766, or by visiting the EPSON Pro Graphics web site at http
  • Epson 10600 | Printer Guide - Page 150
    Maintaining and Transporting the Printer | 5-21 3. Press the Enter button. The print head moves to the cutter replacement position. 4. When OPEN LOWER COVER appears on the display, open the lower cover. 5. To release the cutter blade, push down on its white side pin, then turn the black latch upward
  • Epson 10600 | Printer Guide - Page 151
    casing. 6. Slowly take your finger off the side pin, then remove the cutter blade. Be careful not to lose the spring. 7. Insert the new cutter. 8. Push down on the cutter's side pin while turning the latch to the left. 9. Close the lower cover. The print head returns to the home position. 5-22
  • Epson 10600 | Printer Guide - Page 152
    or dirt around the leg assembly using a soft brush. 6. If the outer case is dirty, clean it with a soft, clean cloth dampened with mild detergent. Keep the ink cartridge compartment closed to prevent water from getting inside. 7. If the area under the roll paper cover accidentally gets soiled with
  • Epson 10600 | Printer Guide - Page 153
    instructions below to prepare the printer for shipment. If you need to store your printer for an extended period (two years for the Photographic Dye ink model, or six months for the Archival Ink or UltraChrome ink model), contact EPSON for assistance (see page 3 for contact information). A service
  • Epson 10600 | Printer Guide - Page 154
    grip areas as shown. 6. Remove the two wing nuts securing the printer to the stand (underneath the printer). Keep them in a safe place. 7. With four people, lift the printer using the hand grips located at the four corners of the printer. (See the stickers located near the rear hand grips for the
  • Epson 10600 | Printer Guide - Page 155
    (if reinstalled). • The first time you start printing after moving the printer, the print head nozzles may be clogged. You may need to run a cleaning cycle (see page 5-4) and realign the print head (see page 5-7) to ensure good print quality. Moving the Printer on the Stand When you need to move the
  • Epson 10600 | Printer Guide - Page 156
    (25% duty cycle) or after 20,000 B0-size prints, you should have your authorized EPSON servicer replace the waste ink system. This is necessary to prevent damage to the print head and maintain print quality. Parts and labor for this service are not covered under the terms of the limited warranty
  • Epson 10600 | Printer Guide - Page 157
    5-28 | Maintaining and Transporting the Printer 5-28
  • Epson 10600 | Printer Guide - Page 158
    instructions for the following: • Diagnosing problems • Improving print quality • Solving operational problems • Solving miscellaneous printing problems • Solving paper problems, including clearing paper jams • Uninstalling and reinstalling printer software Diagnosing Problems The EPSON Stylus Pro
  • Epson 10600 | Printer Guide - Page 159
    Archival ink, or UltraChrome ink cartridges. See page 5-10 for instructions. If you are installing ink cartridges for the first time, you must install the cartridges that came with your printer. If you are replacing ink cartridges, check the package and product code. You must use the ink cartridges
  • Epson 10600 | Printer Guide - Page 160
    aligned with the vertical row of holes at the paper exit. Image is too wide for Resize your image or load wider paper. the paper loaded in the printer. Paper is not fully ejected. Cut the paper at the paper insertion slot, then reload paper. PAPER NOT CUT error Reload paper. was cleared. 6-3
  • Epson 10600 | Printer Guide - Page 161
    to begin cleaning the print head. You're using the wrong Make sure you installed the correct driver for printer driver. your printer: • Stylus Pro 10600DYE driver for Photographic Dye • Stylus Pro 106000CF driver for Archival ink • Stylus Pro 10600UC driver for UltraChrome ink Damaged data was
  • Epson 10600 | Printer Guide - Page 162
    ; if your printer uses UltraChrome ink, you can access the settings from the EPSON driver software (see page 3-10 for Macintosh or page 4-10 for Windows). • Try changing the Paper Feed Adjustment to tune out banding. • Decrease the Paper Suction level if you're printing on thin paper that's getting
  • Epson 10600 | Printer Guide - Page 163
    replace ink cartridges if your ink supply is low, as described on page 5-10. • The platen gap setting is too wide. Use the control panel to change the setting from WIDE to AUTO. See page 2-25 for instructions. • The paper configuration setting is too thick (for non-EPSON media). Try re-profiling
  • Epson 10600 | Printer Guide - Page 164
    to Programs and EPSON Printers, then click EPSON Printer Port Uninstall. Follow the messages on the screen. The printer performs long cleaning cycles. • This is normal and occurs more often when the printer is new (while using the first ink cartridges) to condition the print head for reliable
  • Epson 10600 | Printer Guide - Page 165
    Printers. Right-click the EPSON Stylus Pro 10600 icon, then select Properties. Click the Details tab. Make sure your printer driver is selected in the Print using the following driver list. Then select the port to which your printer is connected in the Print to the following port list. Windows
  • Epson 10600 | Printer Guide - Page 166
    page 3-7 (Macintosh) or 4-8 (Windows) for instructions. Blank paper is printed. • Make sure your software is installed correctly and the printer is selected. • Make sure the Paper Size setting in your printer software is correct for the paper you're using. • Make sure the Paper Source setting in
  • Epson 10600 | Printer Guide - Page 167
    6-10 | Resolving Problems Miscellaneous printing problems (continued) Problem Solution Roll paper cannot be cut. • The paper cutter blade may be dull. Follow the instructions on page 5-20 to replace the blade. • The paper may be too thick to cut with the built-in cutter. Cut the paper by hand
  • Epson 10600 | Printer Guide - Page 168
    Roll Paper Feed Problems If your roll paper is curled too tightly and doesn't feed out of the printer, you can use the three paper guides. Extend the guides as shown below: Use the paper guides only if paper is curled and doesn't feed properly. Otherwise, the paper guides may damage your prints
  • Epson 10600 | Printer Guide - Page 169
    6-12 | Resolving Problems • If you have the paper basket set up in front of the printer, extend the paper guides out so they rest on the front of the basket. • If you have the paper basket set up below the printer, extend the paper guides so they hang behind the basket. 6-12
  • Epson 10600 | Printer Guide - Page 170
    Resolving Problems | 6-13 Clearing Paper Jams When paper gets jammed in the printer, printing stops and you see a PAPER JAM message on the control panel display. Follow these steps to clear paper jams: 1. If roll paper is jammed, open the roll paper cover and cut it by hand slightly above the paper
  • Epson 10600 | Printer Guide - Page 171
    on. 6. Make sure the Paper Out light is on and LOAD PAPER is displayed on the control panel. Then reload your paper. Uninstalling and Reinstalling the Printer Software If you need to uninstall and then reinstall the printer software for any reason, follow the instructions in the appropriate section
  • Epson 10600 | Printer Guide - Page 172
    icon. 3. Click the Add/Remove button (Change/Remove button in Windows XP or 2000) and follow the on-screen instructions. 4. If you're using the USB port in Windows 98 or Me, click EPSON USB Printer Devices in the program list; then click the Add/Remove button. 5. If you want to reinstall your
  • Epson 10600 | Printer Guide - Page 173
    6-16 | Resolving Problems 6-16
  • Epson 10600 | Printer Guide - Page 174
    up to 4.33 mil thick) Maintenance parts Waste ink tank, pump unit, flushing box, head cleaner, cap assembly; require replacement approximately twice during printer life Print direction Bidirectional/unidirectional Control code EPSON ESC/P® Raster Photographic Driver Paper feed speed 215 ± 10
  • Epson 10600 | Printer Guide - Page 175
    (710 mm) 284 lb (129 kg), with stand Electrical Specification Input voltage range Rated frequency range Input frequency range Rated current in sleep mode Check the label on the back of your printer for voltage information. Printer Interfaces • USB (1.1 compatible) • Ethernet network (10/100
  • Epson 10600 | Printer Guide - Page 176
    ) or 6 inches (3-inch core) Poor quality paper may reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper. Do not use curled, folded, or deckle-edge paper. Printable Area Minimum margins for roll paper and cut sheets: 0.12" (3 mm
  • Epson 10600 | Printer Guide - Page 177
    A-4 | Specifications Ink Cartridges Cartridge life Photographic Dye 2 years from production date; within 2 years after opening package UltraChrome and 2 years from production date if unopened; within Archival ink 6 months after opening package Temperature Storage (uninstalled) -22 to 104 °F
  • Epson 10600 | Printer Guide - Page 178
    Windows, 4-12 Cartridges, see Ink cartridges Chooser, selecting printer, 1-27 Cleaner (cleaning unit), checking status, 5-2 to 5-3 Cleaning paper basket, 5-23 print head, 5-4 to 5-6 printer, 5-23 Cleaning button, 5-5 -1 Color management Macintosh, 3-5, 3-8 to 3-9 Windows, 4-8 to 4-10 Color problems
  • Epson 10600 | Printer Guide - Page 179
    Guides, paper, 6-11 to 6-12 H Head Alignment menu, 1-39, 5-7 Head unit (print head), checking status, 5-2 to 5-3 Heavy media, cutting, 2-17 Height of printer, A-2 Help, EPSON, 3 High Speed Copies setting, 1-35, 3-16 High Speed setting, 3-7, 4-8 Humidity requirements, A-2 I ICM setting, 4-4, 4-8 Ink
  • Epson 10600 | Printer Guide - Page 180
    , 5-1 to 5-23 Manual cutter, 2 Manuals, how to use, 1 Margins incorrect, 6-9 minimum, A-3 setting default roll paper, 2-26 Mechanical specifications, A-2 Media, 2-2 to 2-6 Media Type setting, 2-7 to 2-10 Memory problems, 6-8 specifications, A-1 Messages error, 6-2 Metamerism, 3-9, 4-9 MicroWeave
  • Epson 10600 | Printer Guide - Page 181
    , 6-14 to 6-15 specifications, A-1 to A-2 status check, 5-2 storing, 5-24 to 5-25 total print volume, A-1 transporting, 5-24 to 5-27 turning off, 6 weight, A-2 Printer Setting menu, 2-25 to 2-27 Printer Status menu, 5-3 Problems banding, 6-5 blank paper, 6-9 blurry prints, 6-6 cable, 6-7, 6-8 color
  • Epson 10600 | Printer Guide - Page 182
    paper jams, 6-13 to 6-14 print quality, 6-4 to 6-6 printer driver, 6-7 to 6-9 printing stops, 6-7 roll paper cannot be cut, 6-10 slow printing, 6-10 smeared prints, 6-9 Progress Meter, 1-35, 4-11 R RAM, see Memory Requirements, system, 4 to 5 Resolution Macintosh, 3-7 maximum, A-1 Windows, 4-7 RIP
  • Epson 10600 | Printer Guide - Page 183
    -defined paper size, 4-5 Utility cutter, 2 Utility menu Macintosh, 3-14 to 3-15 Windows, 4-13 V Vivid setting, 3-9, 4-9 W Waste ink system, 5-2 to 5-3, 5-27, A-1 Weight of printer, A-2 Width of printer, A-2 Windows advanced print options, 4-7 to 4-10 basic print options, 4-2 to 4-4 color management
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
EPSON Stylus
®
Pro 10600 Series
PRINTER GUIDE
®