Epson 1735W Quick Setup

Epson 1735W - PowerLite WXGA LCD Projector Manual

Get Epson 1735W - PowerLite WXGA LCD Projector PDF manuals and user guides
UPC - 010343869554
View all Epson 1735W manuals
Add to My Manuals
Save this manual to your list of manuals

Epson 1735W manual content summary:

  • Epson 1735W | Quick Setup - Page 1
    PowerLite® 1725/ 1 735W Quick Setup 1 Turn On Your Equipment Before using the projector, make sure you read the safety instructions in the User's Guide on your projector CD. 1 Connect the power cord to the back of the projector and plug the other end into an electrical outlet. 2 Open the A/V Mute
  • Epson 1735W | Quick Setup - Page 2
    wirelessly" on the back of this sheet. VGA computer cable USB cable (Windows only) • To give a presentation stored on a flash drive, digital camera, or other USB storage device, see the EasyMP Operation Guide on your projector CD. If connecting to a notebook... 1 T urn on the projector
  • Epson 1735W | Quick Setup - Page 3
    running Windows 2000, XP, or Windows Vista, or Mac OS X 10.3 or later. Your computer must have a wireless card or built-in wireless interface. You can also project wirelessly by using the Network Projector function in Windows Vista. See the User's Guide for instructions. 1 Turn the projector over
  • Epson 1735W | Quick Setup - Page 4
    (EMP NS Connection) software and configured your projector and computer. See the EasyMP Operation Guide for instructions. 1 Select EasyMP as the source by pressing the EasyMP button on the remote control. 2 Windows: From the Start menu, select Programs or All Programs > EMP NS Connection. Mac OS
  • 1
  • 2
  • 3
  • 4
PowerLite
®
1725/1735W
Quick Setup
1
Turn On Your Equipment
Before using the projector, make sure you read the safety instructions in the
User’s Guide
on your projector CD.
1
Connect the power cord to the back of the projector and plug the other
end into an electrical outlet.
2
Open the
A/V Mute
slide (lens cover). Make sure the slide is
opened completely.
3
Remove the battery cover on the remote control. Locate the two AA
batteries that came with the projector and insert them. Then replace
the battery cover.
4
To turn the projector on, press the
Power
button on the projector
or the remote control. The projector beeps once, and the projector’s
Power
light flashes green and then stays on.
To shut down the projector, press the
Power
button twice and simply
unplug it. You don’t have to wait for the projector to cool off.
1
To raise the image,
press the foot release
button for the front
adjustable foot and lift
the front. Release the
button to lock the foot
in position.
2
Adjust the Image
Power button
Power light
*411482900*
*411482900*