Epson 1815p Quick Start

Epson 1815p - PowerLite XGA LCD Projector Manual

Get Epson 1815p - PowerLite XGA LCD Projector PDF manuals and user guides
UPC - 010343858190
View all Epson 1815p manuals
Add to My Manuals
Save this manual to your list of manuals

Epson 1815p manual content summary:

  • Epson 1815p | Quick Start - Page 1
    PowerLite® 1815p Quick Setup Before using the projector, make sure you read the safety instructions in the User´s Guide on your projector CD. 1 Turn On Your Equipment 1 Connect the power cord to the back of the projector and plug the other end into an electrical outlet. 2 Turn the focus ring to
  • Epson 1815p | Quick Start - Page 2
    must have already installed the projector's EasyMP (EMP NS Connection) software and configured your projector and computer. See the User's Guide for instructions. Also, your computer must have a wireless card or built-in wireless connection. 1 Install the wireless module. If necessary, secure it
  • 1
  • 2
2
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
3
If your image looks like
,
,
,
or
, press the
Quick Setup
button on the projector and follow the on-screen instructions.
PowerLite
®
1815p
Quick Setup
1
Turn On Your Equipment
1
Connect the power cord to the back of the projector and plug the other
end into an electrical outlet.
2
Open the
A/V Mute
slide (lens cover). Make sure the slide is opened
completely.
3
Remove the battery cover on the remote control. Locate the two AAA
batteries that came with the projector and insert them. Then replace
the battery cover.
4
To turn the projector on, press the
Power
button on the projector
or the remote control. The projector beeps once, and the projector’s
Power
light flashes green and then stays on.
To shut down the projector:
1.
Press the
Power
button twice.
2.
When the orange light stops flashing and the projector beeps,
you can unplug the projector.
How do you want to get images to the projector?
•
To connect to a notebook, see “If connecting
to a notebook” below.
•
To project over a wireless network, see
“If projecting wirelessly” on the back of this sheet.
You must have installed the projector’s EasyMP™ software and
configured your projector and computer before you can project
wirelessly. See your
User’s Guide
for instructions.
•
To give a presentation stored on a CompactFlash memory card,
flash drive, digital camera, or other USB storage device, see
Chapter 5 in your
User’s Guide
.
•
To connect to your notebook using the included USB cable,
see your
User’s Guide
.
If connecting to a notebook...
1
Turn on the projector and adjust the image as described in
sections 1 and 2.
2
Locate the computer cable that came with the projector.
Connect one end to the projector’s blue
Computer1
port.
Connect the other end to your notebook’s video-out port or
monitor port.
3
Press the
Source Search
button on the projector or the
Search
button on the remote control until your computer
image is displayed.
NOTE:
If your notebook has a DVI connector, you need to use an
optional DVI-to-VGA adapter with the included computer cable
(see your computer’s documentation).
3
Choose a
Presentation Method
1
To raise the image, press the foot release button for the front
adjustable foot and lift the front. Release the button to lock the
foot in position.
2
Adjust the Image
Turn over
Computer cable
Zoom
Focus
Power button
Before using the projector, make sure you read the safety
instructions in the
User´s Guide
on your projector CD.
Power light