Epson 6100i User Guide - Epson Projector Control
Epson 6100i - PowerLite XGA LCD Projector Manual
 |
UPC - 010343858176
View all Epson 6100i manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson 6100i manual content summary:
- Epson 6100i | User Guide - Epson Projector Control - Page 1
and switching sources, from your computer without using the projector's remote control. Note: Macintosh® systems are not supported. To install the Projector Control software, double-click the installer icon and follow the on-screen instructions. Make sure the following requirements are met before - Epson 6100i | User Guide - Epson Projector Control - Page 2
field. You cannot connect to the projector without entering a Projector IP Address. See your projector's documentation for information on obtaining your projector's IP address. 5. Enter the Web Control password or the password that was set using the Epson EMP Monitor Utility in the Monitor Password - Epson 6100i | User Guide - Epson Projector Control - Page 3
the projector's power on/off. Switches to the Computer1 input source. Switches to the Computer2 input source. Switches to the EasyMP network input source. Switches to the Video input source. Switches to the S-Video input source. Turns A/V Mute on/off on the projector. Using Epson Projector Control - Epson 6100i | User Guide - Epson Projector Control - Page 4
Functions Button Power Computer Function Turns the projector's power on/off. projector. Turns the Freeze function on/off on the projector. Turns the volume down on the projector. Turns the volume up on the projector. Switches between Advanced Mode and Simple Mode. Using Epson Projector Control - Epson 6100i | User Guide - Epson Projector Control - Page 5
the correct Monitor Password or Web Control Password for the projector that you're connecting to. If you didn't set a password, don't enter anything. Epson is a registered trademark of Seiko Epson Corporation. General Notice: Other product names used herein are for identification purposes only
-
1 -
2 -
3 -
4 -
5
 |
 |
Epson Projector Control
User’s Guide
The Epson
®
Projector Control software lets you control the projector over a
wired or wireless network from a computer running Windows
®
2000 SP4,
XP SP2 32-bit, or Windows Vista
™
32-bit. It enables you to perform
operations, such as turning the projector on/off and switching sources,
from your computer without using the projector’s remote control.
Note:
Macintosh
®
systems are not supported.
To install the Projector Control software, double-click the installer icon and
follow the on-screen instructions.
Make sure the following requirements are met before starting the Projector
Control software:
■
The Projector Control software is installed on your computer
■
Your computer and the projector are connected to the same network
and you can access the projector
■
The
Network
setting in the projector’s menu is set to
On
Connecting to the Projector
1.
In Windows, click
Start
>
Programs
>
EPSON Projector
>
Projector Control
. You see a window like this: