Epson 745c Product Information Guide

Epson 745c - PowerLite XGA LCD Projector Manual

Get Epson 745c - PowerLite XGA LCD Projector PDF manuals and user guides
UPC - 010343851207
View all Epson 745c manuals
Add to My Manuals
Save this manual to your list of manuals

Epson 745c manual content summary:

  • Epson 745c | Product Information Guide - Page 1
    Epson PowerLite 745c Projector Projector Parts Card slot Focus ring Zoom ring Control panel Exhaust air vent Foot adjust lever Lens cap Security lock I/R receiver Audio port USB port (Type B) Video port Computer/ S-Video port Component Video port USB port (Type A) Rear adjustable foot
  • Epson 745c | Product Information Guide - Page 2
    * 1280 × 1024* 1600 × 1200* 640 × 480* 800 × 600* 1024 × 768 640 × 480* 832 × 624* 1024 × 768 1024 × 768 1152 × 870* *The image is resized using Epson's SizeWise™ Technology. 2 - Epson PowerLite 745c Projector 8/04
  • Epson 745c | Product Information Guide - Page 3
    the cap. 2. Connect one end of the power cord to the projector's power inlet. Then connect the other end to an electrical outlet. The P Power light on top of the projector turns orange, indicating that the projector is receiving power but not yet turned on. 8/04 Epson PowerLite 745c Projector - 3
  • Epson 745c | Product Information Guide - Page 4
    Epson PowerLite 745c Projector 3. Press the P Power button on top of the projector or on the remote control. Power button Projector Remote control The projector beeps once and the P Power light flashes green as the projector warms up, then an image begins to appear. When the P Power light stops
  • Epson 745c | Product Information Guide - Page 5
    Epson PowerLite 745c Projector Selecting the Image Source If multiple devices are connected to the projector, the easiest way to select the image source is to press the Search button on the remote control or the Source Search button on the projector EasyMP button to project wirelessly or from a
  • Epson 745c | Product Information Guide - Page 6
    electricity, cools the projector, and extends the life of the lamp. If you are done using the projector, unplug the power cord. If you want to start projecting again, press the P Power button. You can enable sleep mode in the Extended menu under Operation. 6 - Epson PowerLite 745c Projector 8/04
  • Epson 745c | Product Information Guide - Page 7
    button to position the crosshair in the area you want to enlarge. 3. Continue pressing the E-Zoom button to enlarge the selected area up to 4 times. 5. Replace the lens cap and unplug the power cord. 8/04 Epson PowerLite 745c Projector - 7
  • Epson 745c | Product Information Guide - Page 8
    twice. ❏ To click and drag, press and hold the Enter button and use the pointer button to move the pointer, then release the Enter button. 3. Replace the battery cover. (It should snap into place.) 8 - Epson PowerLite 745c Projector 8/04
  • Epson 745c | Product Information Guide - Page 9
    Epson PowerLite 745c Projector Using Password Protection If you assign a password for the projector, a screen appears requesting the password whenever you turn on the projector. If you enter the password incorrectly three times in succession, the projector projector. Follow the instructions below
  • Epson 745c | Product Information Guide - Page 10
    's Guide for installation instructions. Starting EasyMP™ Before you can connect to the projector wirelessly, you have to switch it to EasyMP mode. 1. Turn on the remote control and the projector. Press the EasyMP button on the remote control to select EasyMP as the source. 2. Locate the Epson 802
  • Epson 745c | Product Information Guide - Page 11
    Point mode (also called infrastructure mode), you see this screen: Epson PowerLite 745c Projector You see one of these screens: Ad Hoc mode 3. If you've already configured the projector for your wireless network, go to "Projecting Wirelessly" on page 15. Otherwise, continue with the next section
  • Epson 745c | Product Information Guide - Page 12
    and Internet Connections. Then double-click the Network Connections icon. You see a screen similar to this: Right-click and select Properties 2. Right-click the Wireless Network Connection icon and select Properties. You see a screen like this: Click here 12 - Epson PowerLite 745c Projector 8/04
  • Epson 745c | Product Information Guide - Page 13
    the Wireless Networks tab. You see this screen: Note: If you don't see this tab, you may need to enable your wireless card or network device by clicking Configure to access the device settings; then follow any instructions on the screen to enable the device. 8/04 Epson PowerLite 745c Projector
  • Epson 745c | Product Information Guide - Page 14
    problems connecting to the projector, follow these steps: 1. From the Apple pull-down menu, select System Preferences. 11. Check to make sure AirPort is turned on. 12. Select your projector's ESSID (Ad Hoc) or the name of your AirPort network (Access Point). 14 - Epson PowerLite 745c Projector
  • Epson 745c | Product Information Guide - Page 15
    Connection again. ❏ If you still don't see your projector and you are using Access Point mode, follow the instructions in "Connecting in IP Connect Mode" on page 16 to connect to the projector manually. ❏ Make sure you have disabled any firewall software. 8/04 Epson PowerLite 745c Projector - 15
  • Epson 745c | Product Information Guide - Page 16
    changes. Turns off the image and sound. Lets you zoom in on a part of the image. Lets you change the brightness, contrast, and color mode. Lets you switch between the Video and S-Video ports. 2. Click the Extension button. You see this screen: Click here 16 - Epson PowerLite 745c Projector 8/04
  • Epson 745c | Product Information Guide - Page 17
    this happens, run EasyMP to check the projector's IP address, then repeat this step. 4. Press the eject button again. The wireless card partially ejects. 5. Pull the card straight out. Then press the eject button back in to prevent it from being damaged. 8/04 Epson PowerLite 745c Projector - 17
  • Epson 745c | Product Information Guide - Page 18
    the projector, your projector may not be connected or configured correctly for the network. Any projectors found on the network are listed: Click here 4. Select each projector you want to add by clicking its name and clicking Add. When you're done, click Close. 18 - Epson PowerLite 745c Projector
  • Epson 745c | Product Information Guide - Page 19
    the lamp is nearing the end of its life; see page 22) High-speed cooling in progress (the projector is getting too hot but continues to operate) Overheating (projection turned off automatically) Lamp out or lamp cover open Fan error Sensor error Internal problem 8/04 Epson PowerLite 745c Projector
  • Epson 745c | Product Information Guide - Page 20
    it. Flashing red There is an internal error in the projector. Turn off the projector and unplug it. Contact Epson for help. Flashing red There is a problem with the fan or a sensor. Turn off the projector and unplug it. Contact Epson for help. 20 - Epson PowerLite 745c Projector 8/04
  • Epson 745c | Product Information Guide - Page 21
    Epson at (800) 873-7766 to obtain a new set (part number V13H134A08). In Canada, please call (800) 463-7766 to locate a dealer. Note: When you get a replacement lamp for your projector, a new air filter is included. Replace the filter when you replace the lamp. 8/04 Epson PowerLite 745c Projector
  • Epson 745c | Product Information Guide - Page 22
    Epson PowerLite 745c Projector 3. If you need to replace the filter, slide it off as shown. 3. Turn the projector over. Press in on the tabs and lift up the lamp cover. 4. Slide the new air filter until it clicks in place. Replacing the Lamp The projection lamp typically lasts for about 2000 hours
  • Epson 745c | Product Information Guide - Page 23
    Epson PowerLite 745c Projector 8. Insert the two cover tabs, then press down on the cover until it snaps into place. 9. Reset the lamp timer as described in the next section. Resetting the Lamp Timer You must reset the lamp timer after replacing the lamp to clear the Replace the Lamp message. Note:
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
Epson PowerLite 745c Projector
8/04
Epson PowerLite 745c Projector
-
1
Projector Parts
Specifications
General
Type of display
Poly-silicon TFT active matrix
Resolution
1024
×
768 pixels (XGA)
(native format)
Color
24-bit, 16.8 million colors
reproduction
Brightness
2500 lumens (High Brightness mode)
(ANSI)
2000 lumens (Low Brightness mode)
Contrast ratio
400:1
Image size
30 to 300 inches (0.8 to 7.6 meters)
Projection
3.2 to 39.7 feet (1.0 to 12.1 meters)
distance
Projection
Front, rear, upside-down (ceiling mount)
methods
Internal
1 W monaural
sound system
Optical aspect
4:3 (horizontal:vertical)
ratio
Zoom ratio
1:1.2
Noise level
36 dB (Low Brightness mode)
Mouse
Supports USB (type B)
compatibility
Projection Lamp
Type
UHE (Ultra High Efficiency)
Power
170 W
consumption
Lamp life
High Brightness mode: about 2000 hours
Low Brightness Mode: about 3000 hours
Part number
V13H010L32
Remote Control
Range
20 feet (6 meters)
Batteries (2)
Alkaline AAA
Dimensions
Height
2.7 inches (70 mm), feet retracted
Width
10.9 inches (276 mm)
Depth
7.6 inches (193 mm)
Weight
3.9 lb (1.8 kg)
Electrical
Rated frequency
50/60 Hz AC
Power supply
100 to 120 VAC, 2.7 A
200 to 240 VAC, 1.1 A
Power
Operating: 240 W
consumption
Environmental
Temperature
Operating: 41 to 95 °F (5 to 35 °C)
Storage: 14 to 140 °F (–10 to 60 °C)
Humidity
Operating: 20 to 80% RH,
(non-condensing)
Storage: 10 to 90% RH
I/R receiver
Lens cap
Exhaust air vent
Foot adjust lever
Security lock
Control panel
Zoom ring
Focus ring
Card slot
Speaker
Rear adjustable
foot
Power inlet
USB port
(Type B)
Audio port
Computer/
Component
Video port
Video port
S-Video port
USB port
(Type A)