Epson 745c Product Support Bulletin(s)
Epson 745c - PowerLite XGA LCD Projector Manual
 |
UPC - 010343851207
View all Epson 745c manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson 745c manual content summary:
- Epson 745c | Product Support Bulletin(s) - Page 1
EPSON PRODUCT SUPPORT BULLETIN Date: TIB #: Reference: Product(s): Subject: 06/10/2009 Originator: DS PSB.2009.06.002 Authorization: TI 09-08j Rev. A Total Pages: 8 PowerLite 735c / 737c / 745c /755c/ 765c / 835p /1705/1715/1815/1825/7850p / 8300 with EasyMP.net option, Pro G5150/G5350 / - Epson 745c | Product Support Bulletin(s) - Page 2
Also you can access troubleshooting by clicking Start Æ All programs Æ EPSON ProjectorÆEMP NS ConnectionÆEMP NS Connection V2.51 Troubleshooting. Page 2 of 8 PSB.2009.06.002 - Epson 745c | Product Support Bulletin(s) - Page 3
Wireless/USB Display/NS Connection on a PC with the built-in NVIDIA graphics chip (ex.ThinkPadT61 NVIDIA Quadro NVS 140M/NVIDIA Quadro FX 570M Display Driver is being used, and the hardware acceleration setting is changed manually, at next startup, NS connection starts with the same setting level of - Epson 745c | Product Support Bulletin(s) - Page 4
PowerLite 1705 / 1715 / 1815 projectors, due to the limitation of the new OS (WindowsCE) on IM-X4 projectors. • To avoid conflicts between the Quick Wireless and other makers' utilities, when the Quick Wireless starts, this version stops services used • Virtual display driver cannot be installed in - Epson 745c | Product Support Bulletin(s) - Page 5
at least (Pentium M1.6GHz at least recommended) Mac: Power PC G3 900MHz at least recommended At least 256MB (At least epson.com to the version 2.50 update for NS Connection. The files are extracted and copied to C:\EPSON for PowerLite 7850p Improved the transfer rate specification for PowerPoint Page 5 - Epson 745c | Product Support Bulletin(s) - Page 6
that NS connection supports 2.51 Feb.9,2009 - Addition of supported models (PowerLite-85/825/826W) - Addition of supported languages - Addition of troubleshooting function (Only for Windows) [Exhibit 1] Wireless LAN client list that NSC V2.30 and V2.40 stops their service process Page 6 of - Epson 745c | Product Support Bulletin(s) - Page 7
WPNT511 SMART WIZARD Ver1.1.3.0 Wireless-N Notebook Adapter Wireless Network Monitor v1.05 Wireless-G Notebook Adapter Wireless Network Monitor Ver 3.1 Wireless-G Notebook Adapter with SRX400 Setup Wizard V1.1 Wireless-G Portable USB Adapter WLAN Monitor v1.05 Wireless-G USB Adapter with Wi-Fi - Epson 745c | Product Support Bulletin(s) - Page 8
Smart Wizard Utility NETGEAR wn111 NETGEAR WN111 Smart Wizard Utility NETGEAR WUSB600N Linksys Wireless Network Monitor PLANEX GW-US300MiniW PCI GW-US300MiniW Utility *1: Because Access Connection service stops, power display of Power Manager becomes invalid. Page 8 of 8 PSB.2009.06.002 - Epson 745c | Product Support Bulletin(s) - Page 9
EPSON PRODUCT SUPPORT BULLETIN Date: PSB #: Reference: Product(s): Subject: 04/20/2009 Originator: JAM PSB.2009.06.001 Authorization: TI 09-05e Rev. A/B Total Pages: 5 PowerLite 735c / Cinema 500 / 737c / 745c / 755c / 765c / 830p / 835p / 1705c / 1715c / 6100i / 6110i / 7800p / 7850p / - Epson 745c | Product Support Bulletin(s) - Page 10
source buttons for USB display, USB, and LAN are available as separate input sources as shown below: - Old version - EMP Monitor V4.22 EMP Monitor V4.22 - New version - EMP Monitor V4.30 EMP Monitor V4.30 . (3) New feature for the PowerLite 84 / 85 / 825 / 826W. Displays projector's serial number in - Epson 745c | Product Support Bulletin(s) - Page 11
4.30 update for EMP Monitor. The files are extracted and copied to C:\EPSON\epson13055_emp_monitor_430. This file is a self-extracting archive and will start the installation utility for EMP Monitor. Follow the on-screen instructions during the installation process. Page 3 of 4 PSB.2009.06.001 - Epson 745c | Product Support Bulletin(s) - Page 12
30 April 3, 2009 Remarks Supported PowerLite 735c Supported PowerLite 7800p / 8300i Supported PowerLite 7850p / 8300i with EasyMP.net option module Supported PowerLite Cinema 500 Supported Serial -TCP/IP conversion adapter for PowerLite 61p / 81p Supported projectors that are configured on a large - Epson 745c | Product Support Bulletin(s) - Page 13
7 PowerLite 735c / 737c / 745c / 755c / 765c / 835p 1705c / 1715c / 1815p / 1825p / 7850p / 8300i with EasyMP.net option Pro G5150 / Pro G5350 / 1725 / 1735W Release of Check Tool for Network Projectors V1.00 (for Windows) This bulletin was created to inform you about the release of Epson Check - Epson 745c | Product Support Bulletin(s) - Page 14
Connection and EMP NS Connection's Quick Connection mode can set the SSID on the user's PC when trying to connect to a projector using EMP Quick Wireless Connection and EMP NS Connection's Quick Connection Mode. The Check Tool checks for communication conflict and whether it can actually stop the - Epson 745c | Product Support Bulletin(s) - Page 15
not check whether the firewall of manufacturers of security software other than Windows may be blocking EPSON Quick Wireless Connection/EMP NS Connection. 2) Operating Environment Check Tool for Network Projector V1.00 OS CPU Memory Disk space Display Windows 2000 SP4 Rollup1 / XP Home Edition - Epson 745c | Product Support Bulletin(s) - Page 16
3) Location of download file: Check Tool for Network Projector V1.00 Download epson12794.exe from the Epson website (www.epson.com). This is a self-extracting file; please follow the screen prompts to install the Check Tool software. 4) Double-click the [EB_CHT.exe] icon 5) Read the - Epson 745c | Product Support Bulletin(s) - Page 17
dialog is displayed. It takes a few minutes for the results of the verification are displayed 8) When two or more wireless LAN adapters are available on your computer, the adapter selection dialog opens. Select the wireless LAN adapter and press the OK button to continue. Page 5 of 7 PSB.2009.01.006 - Epson 745c | Product Support Bulletin(s) - Page 18
as the check tool. File Name: CheckInfo.log **** indicates the created date and time. [Exhibit 1] Wireless LAN client list that NSC and Quick Wireless Connection stop their service process Supported by NSC V2.30 Manufacturer Name D-Link NETGEAR BUFFALO IBM IBM Logitec Linksys NETGEAR - Epson 745c | Product Support Bulletin(s) - Page 19
by Linksys NSC V2.40 WUSB54GSC Compact Wireless-G USB Adapter Wireless Network Monitor v1.05 Supported by NSC V2.50 & Quick Wireless Connection V1.00 Atheros Atheros Client Utility *1: Because Access Connection service stops, power display of Power Manager becomes invalid. Software Upgrade - Epson 745c | Product Support Bulletin(s) - Page 20
TI 08-29e Rev. A Total Pages: 8 PowerLite 1735W, 735c, 737c, 745c, 755c, 765c, 835p, 1705c, 1715c, 1725, 1815c, 1825, 7850p, 7950p, 8300i with EasyMP.Net optional module, Pro G5150 and Pro G5350 projectors EMP SlideMaker2 updated Version 1.30 - provides scenario support for WXGA (1280 x 800 - Epson 745c | Product Support Bulletin(s) - Page 21
1) Selecting Aspect Ratio for the Projector being used: a) Properties Window b) Drag and Drop Window 2 of 8 PSB.2009.01.003 - Epson 745c | Product Support Bulletin(s) - Page 22
2) How to Verify the Aspect Ratio of the Scenario: The resolution of the scenario is displayed in the window title of the Scenario Window and Scenario Preview as shown below: a) Scenario Window b) Scenario Preview 3 of 8 PSB.2009.01.003 - Epson 745c | Product Support Bulletin(s) - Page 23
3) Location of download file: EMP SlideMaker2 updated Version 1.30 Download epson12812.exe from the Epson website (www.epson.com) This is a self extracting file, please follow screen prompts. After "Clicking" on the "Setup.exe" file, your will be prompted to: 4 of 8 PSB.2009.01.003 - Epson 745c | Product Support Bulletin(s) - Page 24
Select you language. 5 of 8 PSB.2009.01.003 - Epson 745c | Product Support Bulletin(s) - Page 25
Click "Next" at this screen. 6 of 8 PSB.2009.01.003 - Epson 745c | Product Support Bulletin(s) - Page 26
Click "Finish" to complete the installation. 7 of 8 PSB.2009.01.003 - Epson 745c | Product Support Bulletin(s) - Page 27
4) How to User the software: Please refer to the original documentation that came with your Projector. 5) Operating Environment: OS Office CPU Memory Disk space Display Windows 98/98SE/Me/ 2000 Professional/XP Home Edition SP4 / XP SP1,SP2,SP3 Professional(32bit) / - Epson 745c | Product Support Bulletin(s) - Page 28
(with firmware version 1.10 or later) / 6110i Clean air filter notification PowerLite 6110i Supported Projectors: This application supports the following Epson projectors: Page 1 of 3 PSB.2007.11.005A Languages supported in prior version of EMP Monitor: English, Japanese, French, German, Italian - Epson 745c | Product Support Bulletin(s) - Page 29
PowerLite 735c PowerLite 737c PowerLite 745c PowerLite 755c PowerLite 765c PowerLite 830p PowerLite 835p PowerLite 1705c PowerLite 1715c PowerLite 6100i PowerLite 7800p PowerLite 7850p PowerLite 7900NL PowerLite 8300i / 8300NL PowerLite 8300i with the EasyMP.net Option Module installed PowerLite - Epson 745c | Product Support Bulletin(s) - Page 30
29, 2007 September 26, 2007 Notes Added support for the PowerLite 735c Added support for the PowerLite 7800p / 8300i Added support for the PowerLite 7850p / PowerLite 8300i with the EasyMP.net option module installed Added support for the PowerLite Cinema 500 Added support for the Serial ↔ TCP/IP - Epson 745c | Product Support Bulletin(s) - Page 31
the Elmo HV-110XG Document Camera when initially connected to an Epson projector. Problem: When attempting to use the Elmo HV-110XG Document Camera which are beyond projector sync specifications. Solution: With the Elmo HV-110XG Document Camera powered on and connected to the projector via the VGA - Epson 745c | Product Support Bulletin(s) - Page 32
EPSON PRODUCT SUPPORT BULLETIN Date: PSB #: Reference: Product(s): Subject: 04/20/2006 Originator: AP PSB.2006.04.002 Authorization: TI 05-95e Rev. A Total Pages: 1 PowerLite 735c / 737c / 745c / 755c / 765c / 835p / 7850p Animation converter issue found with EMP SlideMaker2 version 1.12 - Epson 745c | Product Support Bulletin(s) - Page 33
and found compatible on Windows XP with Service Pack 2. The wireless connection modes tested were peer-to-peer (Adhoc) and through an access point (Infrastructure). NS Connect version 1.31 is intended for and bundled with the Epson PowerLite 745c projector. NS Connect version 1.40 is intended for - Epson 745c | Product Support Bulletin(s) - Page 34
the Wireless channel and B/G Mode settings. 2. Wireless control - Configure the wireless settings with Windows and not with a wireless software utility mode AdHoc or Infrastructure 4. Search and connect to the target wireless device / verify Open/Shared and WEP settings 5. Verify communication - Epson 745c | Product Support Bulletin(s) - Page 35
Highlight "Wireless Network Connection" - Right-click Page 3 of 16 PSB.2005.05.007 - Epson 745c | Product Support Bulletin(s) - Page 36
"General" tab Click the Wireless Network Connection Properties Screen Connect using "Intel(R) Wireless 2200BG Network Connection - Click the "Configure" button.* *Click the "Configure" button for the wireless adapter installed in the computer on which the wireless settings are being configured. Page - Epson 745c | Product Support Bulletin(s) - Page 37
On the next GUI screen - Click the "Advanced" tab - In the "Property" Pull-Down Highlight/Pick "AdHoc Channel" and for "Value" on the Pull-Down pick channel "5" Page 5 of 16 PSB.2005.05.007 - Epson 745c | Product Support Bulletin(s) - Page 38
In the "Property" pull-down menu: Highlight/Pick "Wireless Mode" and for "Value" remove the check for "Use default value" and on the pull-down pick "802.11b only". Then click the "OK" button to close. Page 6 of 16 PSB.2005.05.007 - Epson 745c | Product Support Bulletin(s) - Page 39
2. Right-click "My Network Places" and choose Properties Highlight "Wireless Network Connection" - Right-click Click on the "Wireless Networks" tab Verify or check the [X] "Use Windows to configure my wireless network settings" Page 7 of 16 PSB.2005.05.007 - Epson 745c | Product Support Bulletin(s) - Page 40
If un-checked, check and click on [OK] button on the bottom of the GUI Double-check that the setting took effect by going through item 2 again. Page 8 of 16 PSB.2005.05.007 - Epson 745c | Product Support Bulletin(s) - Page 41
3. Right-click "My Network Places" Properties Highlight "Wireless Network Connection" - Right-click Click on the "Wireless Networks" tab On the bottom lower right of the GUI, click on the [Advanced] button In the "Advanced" screen select the mode of operation Click " - Epson 745c | Product Support Bulletin(s) - Page 42
Networks" tab still visible On the "Available networks" box... you should see the wireless devices in the pull-down screen. To the right of that section there are 2 boxes [Configure] or [Refresh] If your wireless device is not seen, click "Refresh"...the device should appear in 1-2 minutes. Page - Epson 745c | Product Support Bulletin(s) - Page 43
Authentication" Open/Shared (Open preferred),"Data encryption" (WEP settings) Disabled/WEP (Disabled preferred) Change as necessary and click the [OK] button. "Wireless Networks" tab still visible Click the [OK] button... the system should connect in 1-2 minutes. Page 11 of 16 PSB.2005.05.007 - Epson 745c | Product Support Bulletin(s) - Page 44
screens overlapping). The following information should appear: Wireless Connection Network (proxim1 in this example) Speed: 11.0 Mbpd Signal Strength: Excellent Right-click to open the wireless properties and verify good transmission and reception of wireless packets. Page 12 of 16 PSB.2005.05 - Epson 745c | Product Support Bulletin(s) - Page 45
6. Start NS connect From the pull-down Menu, select the "wireless" adapter card or wireless port. Click OK Page 13 of 16 PSB.2005.05.007 - Epson 745c | Product Support Bulletin(s) - Page 46
The projector should appear on the list in 1-2 minutes. Highlight the projector, check [X] the projector name box. Page 14 of 16 PSB.2005.05.007 - Epson 745c | Product Support Bulletin(s) - Page 47
Click on the 'Lock' and "Presentation mode" icons to enable them. Page 15 of 16 PSB.2005.05.007 - Epson 745c | Product Support Bulletin(s) - Page 48
Click on the Connect button and the following shows the session in use and active. Follow the NS Connect instructions on how to control the projector and change the projector settings. Page 16 of 16 PSB.2005.05.007 - Epson 745c | Product Support Bulletin(s) - Page 49
EPSON Product Support Bulletin Date: PSB #: Reference: Product(s): Subject: May 11, 2005 Originator: VS PSB.2005.05.002 Authorization: TI 04-45e Rev. D Total Pages: 6 PowerLite 737c / 745c / 835p Supported USB devices, memory cards, and LAN (wired and wireless) cards Reason: This bulletin - Epson 745c | Product Support Bulletin(s) - Page 50
Pass Pass Pass Pass Pass Pass Pass Pass Fail Pass Pass Pass Pass USB MEMORY I.O DATA EDP-512M I.O DATA EasydiskLight I.O DATA EDP2-256M I.O 1G BUFFALO Petit Driver2x 512B BUFFALO Clip-Driver(USB2.0)128B BUFFALO Clip-Driver (USB2.0)512B BUFFALO Clip-Driver (USB1.1)128B Logitech LMC-512UD2 Logitech - Epson 745c | Product Support Bulletin(s) - Page 51
with a card reader. The projector can read the USB memory, but can not read the USB memory card from the card reader. Note: This evaluation was conducted to make sure that the USB devices listed above will function normally with the PowerLite 745c and PowerLite 835p projectors. Page 3 of 6 PSB.2005 - Epson 745c | Product Support Bulletin(s) - Page 52
wireless LAN connection is made to the projector using an access point (Infrastructure mode). Items evaluated: The following items were tested and confirmed to work in both Ad hoc and infrastructure modes. (WEP is only supported features. Power Point slide show works. Page 4 of 6 PSB.2005.05.002 - Epson 745c | Product Support Bulletin(s) - Page 53
Pass Pass Pass Pass Pass Pass Pass PowerLite 745c (WPA, LEAP) Pass Pass Pass Pass Pass Pass Pass - - PowerLite 737c Pass Pass Pass Pass Pass Wired LAN cards configuration: Insert the wired LAN card to be tested into one of three projectors, connect the projector to a hub and connected two PCs to - Epson 745c | Product Support Bulletin(s) - Page 54
PCM100 ver. 2 Linksys PCMPC100 ver. 3 Planex FNW-3800-TX SMC SMC8041TX SMC SMC8041TX V. 2 SMC SMC8036TX Surecom EP-427X Xircom CE3B-100BTX Xircom CBE2-100 PowerLite 745c Pass Pass Pass Fail Fail Pass Pass Pass Pass Fail Pass Pass Pass Fail Fail Pass Pass Pass Pass Pass Fail Pass Fail Fail The - Epson 745c | Product Support Bulletin(s) - Page 55
the PowerLite 745. 2) Test response: a) The projector should detect the USB device or memory card when connected. b) The EasyMP CardPlayer feature of the projector should function properly. Evaluation results of USB devices and memory testing: USB Device / Model PowerLite 745c PowerLite 835p USB - Epson 745c | Product Support Bulletin(s) - Page 56
40GB Pass Pass Fail Pass Pass Pass USB MEMORY I.O DATA EDP-512M I.O DATA SU40 (MP3 player) Transcend JetFlash2.0 512MB Transcend JetFlash2A 512MB Pen Driver (mini) 256M SONY USM-32D Pass Fail Fail Pass *3 Pass Pass Pass Pass Pass Pass Digital Camera CASIO FUJIFILM FUJIFILM FUJIFILM KONICA - Epson 745c | Product Support Bulletin(s) - Page 57
. When the format is "FAT32", during play back, the projector will stop playing the scenario file. Note: This evaluation was conducted to make sure that the USB devices listed above will function normally with the PowerLite 745c and PowerLite 835p projectors. An EMI test was not conducted on the - Epson 745c | Product Support Bulletin(s) - Page 58
Cinema Color Editor, VCOM Driver Evaluation results of Epson Projector PC applications tested in Epson PC projector applications tested under the Windows XP SP2 (Service Pack2) environment. Description: Information is provided about the evaluation results and recommendations for Epson PC projector - Epson 745c | Product Support Bulletin(s) - Page 59
Executing the Software: When executing the software noted below for the first time after SP2 installation completes, the following security alert messages are displayed: [EMP NS Connection] Security alert screen (EMP NS Connection) [EMP Network Manager] Security alert screen (EMP Network Manager) - Epson 745c | Product Support Bulletin(s) - Page 60
[EMP Monitor] Security alert screen (EMP Monitor) [EMP Multi Screen Adjustment] Security alert screen (EMP Multi Screen Adjustment) The Security Alert screen for EMP Multi Screen Adjustment is shown after clicking the Auto button of Network or clicking the Add button after entering an IP address in - Epson 745c | Product Support Bulletin(s) - Page 61
[Cinema Color Editor] Security alert screen (Cinema Color Editor) The functions of the three buttons displayed in the security alert screen are explained below. [Keep Blocking] --- Enables you to register a started application in the "Exceptions" program of the Windows Firewall. The network port - Epson 745c | Product Support Bulletin(s) - Page 62
the main screen of each application is displayed. [EMP NS Connection Application] Port 3620 is necessary for searching for projectors. If this port is blocked, projectors are not detected. The other applications operate normally. However, there is a case that execution of automatic search disables - Epson 745c | Product Support Bulletin(s) - Page 63
[Caution] In case the check box for Don't allow exceptions is checked (this box is not checked at the initial setting), a network port for software is not unblocked even though the software is checked on Exceptions. Make sure this option is not selected. Windows Firewall screen Page 6 of 14 PSB.2004 - Epson 745c | Product Support Bulletin(s) - Page 64
c.) Select the Exceptions tab and display exceptions program. [Caution] If this check box is not checked, the security alert screen is not displayed when starting software. •Exceptions screen d.) Check the check boxes for the software you don't want to block. Page 7 of 14 PSB.2004.10.002 - Epson 745c | Product Support Bulletin(s) - Page 65
[EMP NS Connection] • Check EasyMP Software box Unblock screen (EMP NS Connection) Page 8 of 14 PSB.2004.10.002 - Epson 745c | Product Support Bulletin(s) - Page 66
[EMP Network Manager Application]• Check EPSON Projector box Unblock screen (EMP Network Manager) Page 9 of 14 PSB.2004.10.002 - Epson 745c | Product Support Bulletin(s) - Page 67
[EMP Monitor Application]→ Check EasyMP.net Software box Unblock screen (EMP Monitor) Page 10 of 14 PSB.2004.10.002 - Epson 745c | Product Support Bulletin(s) - Page 68
[EMP Multi Screen Adjustment Application]→ Check EPSON Projector Software for Multi Screen box Unblock screen (EMP Multi Screen Adjustment) Page 11 of 14 PSB.2004.10.002 - Epson 745c | Product Support Bulletin(s) - Page 69
[Cinema Color Editor Application] ---> Check Cinema Color Editor. Unblock screen (Cinema Color Editor) By following the above procedure, the network port that each application uses is unblocked and they can operate normally. Page 12 of 14 PSB.2004.10.002 - Epson 745c | Product Support Bulletin(s) - Page 70
to PC applications PC Application Program name EMP NS Connection EasyMP Software EMP Network Manager EPSON Projector EMP Monitor EasyMP.net Software EMP Multi Screen Adjustment EPSON Projector Software for Multi Screen Cinema Color Editor Cinema Color Editor When selecting the Unblock - Epson 745c | Product Support Bulletin(s) - Page 71
The following message is shown after the VCOM driver is installed on your PC. Select "No, not this time" item and continue the Plug&Play of the device. 8.) Notes: When you add the program
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
 |
 |
EPSON
P
RODUCT
S
UPPORT
B
ULLETIN
Date:
06/10/2009
Originator:
DS
TIB #:
PSB.2009.06.002
Authorization:
Reference:
TI 09-08j Rev. A
Total Pages:
8
Product(s):
PowerLite 735c / 737c / 745c /755c/ 765c / 835p /1705/1715/1815/1825/7850p
/ 8300 with EasyMP.net option, Pro G5150/G5350 / 1725 / 1735W / 85 / 825 /
826W
Subject:
Release of EMP NS Connection for Windows & Mac Upgrade from v2.50 to
v2.51
This bulletin was created to inform you of the release of the new version 2.51 of the
EMP NS Connection software.
Description of Change
:
Improvements have been made to the EMP NS Connection utility.
Reason
:
The improvements to NS Connection V2.51 are as follows
Improvements
（
V2.50
( V2.51
Improvements
Addition of 10 new languages:
Arabic, Ukrainian, Romanian,
Indonesian, Croat, Slovak, Bulgarian, Malay, Vietnamese and Hebrew.
Addition of troubleshooting function (Windows Only)
When pressing the troubleshooting button, the
corresponding troubleshooting and error number is displayed
in the error message window.
•
When experiencing problems with NS Connect, please report to
Epson the error number along with the failure information.
Error number
Page 1 of 8
PSB.2009.06.002