Epson 7800p Start Here Card

1

Connect the power cord to your

projector and plug the other end

into an electrical outlet.

2

Remove the lens cover.

3

Locate the projector’s remote control

and turn it over. Push down on the

ridges at one end of the battery cover

as you slide the cover off.

4

Locate the batteries that came with

your projector and insert them as

shown. Then replace the battery cover.

5

Push up on the remote control’s on/off

switch to turn it on.

6

Aim the remote control at the projector

and press the

Power

button. The

projector’s

power light flashes green,

and then stays on.

7

Turn on or restart your laptop. (Windows

®

only:

If you see a New Hardware screen, click

Cancel

.)

Turn over

T

urn on your equipment

C

onnect the projector

to your laptop

Power cord

VGA computer cable

Follow these instructions to connect the projector

to your laptop. To connect other devices, such as

a VCR or desktop PC, see your

User’s Guide

.

EPSON

®

PowerLite

®

7800p

Quick Setup

CAUTION:

Before unplugging the projector...

To shut the projector down properly:

1.

Press the

Power

button twice. Let the projector cool while

the

power light flashes orange (about 30 seconds).

2.

Once the light stops flashing and stays on, it’s safe to unplug

the projector.

Never unplug the projector when the

power light is green or

flashing orange.

For most setups, you’ll need just these two cables:

1

Make sure your projector and laptop are turned off.

2

Connect one end of the VGA computer cable to the

Computer

port on the projector.

3

Connect the other end to your laptop’s video-out or

monitor

port. If you can’t connect the cable to your PowerBook,

®

you may

need to use an adapter. See your

User’s Guide

for instructions.

Lens cover

Ridges

On/off

switch

Epson 7800p Start Here Card

Epson 7800p - PowerLite XGA LCD Projector Manual

Epson 7800p manual content summary: