Epson 7900p User Manual

Epson 7900p - PowerLite XGA LCD Projector Manual

Get Epson 7900p - PowerLite XGA LCD Projector PDF manuals and user guides
UPC - 010343852464
View all Epson 7900p manuals
Add to My Manuals
Save this manual to your list of manuals

Epson 7900p manual content summary:

  • Epson 7900p | User Manual - Page 1
    Epson® PowerLite® 7900p Multimedia Projector User's Guide
  • Epson 7900p | User Manual - Page 2
    User's Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. WARNING: The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation. Caution: When you replace the lamp
  • Epson 7900p | User Manual - Page 3
    28 Connecting to the DVI Port 29 Using the Macintosh Desktop Adapter 30 Connecting the Cable for Remote Mouse Control . . . . 31 Connecting an External Monitor 32 Playing Sound Through the Projector 33 Connecting Audio Equipment to the Projector 33 Connecting External Speakers 34 3
  • Epson 7900p | User Manual - Page 4
    48 Adjusting Color Corrections for a New Surface 49 Shutting Down the Projector 49 Using the Remote Control 51 Activating and Using the Remote Control 52 Using the Navigation Buttons 53 Replacing the Batteries 54 Controlling the Picture and Sound 55 Switching Between Picture Sources 55
  • Epson 7900p | User Manual - Page 5
    a Remote Computer 85 Installing the Easy Management Software 86 System Requirements 86 Installing the Software 86 Connecting and Configuring the Projector 87 Using EMP Monitor 89 Opening and Closing EMP Monitor 90 Registering a Projector 90 Monitoring Your Projectors 93 Controlling Your
  • Epson 7900p | User Manual - Page 6
    Viewing Lamp Usage and Other Information 113 Solving Problems with the Image or Sound 114 Solving Easy Management Problems 120 Solving Problems with the Remote Control 120 Where To Get Help 121 Internet Support 121 Speak to a Support Representative 121 A Appendix A: Projector Installation
  • Epson 7900p | User Manual - Page 7
    C Appendix C: Notices 131 Important Safety Instructions 131 Remote Control Information 133 Declaration of Conformity 134 FCC Compliance Statement 135 Warranty 136 Index 139 Contents 7
  • Epson 7900p | User Manual - Page 8
    8 Contents
  • Epson 7900p | User Manual - Page 9
    of image color, regardless of ambient lighting. In addition, the PowerLite 7900p offers outstanding image quality, with up to 4000 lumens of brightness, a resolution of 1024 × 768 pixels, and a 700:1 contrast ratio. Your Epson PowerLite projector can be connected to three computers at the same time
  • Epson 7900p | User Manual - Page 10
    PowerLite 7900p, you can assign a password, create a user logo which is displayed at startup to identify the projector, and disable the projector projector. See page 20 for instructions. ■ Using the remote control The remote control lets you switch from computer to video sources, zoom in on part
  • Epson 7900p | User Manual - Page 11
    more resources and services are available if you register to join the Presenters Club®-and it's free. ■ built-in help system Press the Help button on the remote control or projector to get quick solutions for common problems. See page 110 for details. ■ support.epson.com Download FAQs (frequently
  • Epson 7900p | User Manual - Page 12
    . In addition, for customers who register their projector, Epson offers free Extra CareSM Road Service. In the unlikely event of an equipment failure, you won't have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States or Canada, usually
  • Epson 7900p | User Manual - Page 13
    Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: Projector Remote control and batteries Projector software CD-ROM Power cable VGA computer cable Save all packaging in case you need to ship the projector. Always use the original packaging (or
  • Epson 7900p | User Manual - Page 14
    Components Depending on how you plan to use the projector, you may need additional components: ■ To receive an S-Video signal, you'll need an S-Video cable. One may be provided with your video equipment, or you can purchase one from Epson; see page 15. ■ To receive a component video signal from
  • Epson 7900p | User Manual - Page 15
    Optional Accessories To enhance your use of the projector, Epson provides the following optional accessories: Product Replacement lamp Air filter replacement set Middle throw zoom lens (standard lens) Wide throw zoom lens Long throw zoom lens ATA shipping case ATA molded hardshell case Ceiling
  • Epson 7900p | User Manual - Page 16
    16 Welcome
  • Epson 7900p | User Manual - Page 17
    and how to connect it to a video source (such as a VCR or DVD player) or to a notebook or desktop computer. Follow the instructions in this chapter on: ■ Positioning the projector ■ Connecting to video equipment ■ Connecting to a computer ■ Connecting an external monitor ■ Playing sound through the
  • Epson 7900p | User Manual - Page 18
    123 for details. Positioning the Projector If you're setting up the projector yourself and it isn't already installed in the theater or conference room you're using to the equipment to be able to control it. Try to leave as much space as possible between the projector and the screen to get a good-
  • Epson 7900p | User Manual - Page 19
    projector's left side. You can purchase this from Epson; see "Optional Accessories" on page 15. If you place the projector below projector. See page 44 for detailed information about correcting the image shape. For instructions on installing the projector in a permanent location, such as a theater
  • Epson 7900p | User Manual - Page 20
    S-Video connector (4-pin mini-DIN) BNC connector (component video) Connecting to Video Equipment You can connect up to four video sources to the projector at the same time. Before starting, look at your video equipment to determine its available video-output connections: ■ If your video player has
  • Epson 7900p | User Manual - Page 21
    4. If you don't need to make any other connections, see Chapter 2 or the Quick Setup sheet for instructions on turning on the projector and adjusting the image. 5. Once the projector is turned on, enter the projector's Video menu and make sure Video Signal is set to Auto; see page 74. Setting Up the
  • Epson 7900p | User Manual - Page 22
    video equipment, or you can purchase one from Epson; see page 15). 2. Connect the cable between the S-Video connector on your player and the S-Video connector on the projector: 3. If you want to play sound through the projector, see page 33 for instructions on connecting an audio cable. 4. If you
  • Epson 7900p | User Manual - Page 23
    on connecting an audio cable. 4. If you don't need to make any other connections, see Chapter 2 for instructions on turning on the projector and adjusting the image. 5. Once the projector is turned on, enter the projector's Setting menu and make sure BNC Input is set to Auto; see page 74. Setting Up
  • Epson 7900p | User Manual - Page 24
    an audio cable. 4. If you don't need to make any other connections, see Chapter 2 for instructions on turning on the projector and adjusting the image. 5. Once the projector is turned on, enter the projector's Setting menu and make sure Computer Input is set to Auto; see page 74. 24 Setting Up
  • Epson 7900p | User Manual - Page 25
    4. If you don't need to make any other connections, see Chapter 2 or the Quick Setup sheet for instructions on turning on the projector and adjusting the image. 5. Once the projector is turned on, enter the projector's Setting menu and make sure BNC Input is set to Auto; see page 74. Setting Up the
  • Epson 7900p | User Manual - Page 26
    Out port does not support a DVI connection. Connecting to a Computer You can connect the PowerLite projector to any computer that connect a USB cable so you can use the remote control as a mouse; see page 31 ■ connect a monitor to the projector so you can view your presentation close-up as well
  • Epson 7900p | User Manual - Page 27
    remote control as a mouse (see page 31). 4. When you've finished making any connections, see Chapter 2 for instructions on turning on the projector and adjusting the image. 5. Once the projector is turned on, enter the projector 30 (available from Epson; see page 15). Setting Up the Projector 27
  • Epson 7900p | User Manual - Page 28
    connect a USB cable to use the remote control as a mouse (see page 31). 5. When you've finished making any connections, see Chapter 2 for instructions on turning on the projector and adjusting the image. 6. Once the projector is turned on, enter the projector's Setting menu and make sure BNC Input
  • Epson 7900p | User Manual - Page 29
    a cable from Epson). 2. Connect the cable to the projector's DVI port as remote control as a mouse (see page 31). 5. When you've finished making any connections, see Chapter 2 for instructions on turning on the projector and adjusting the image. 6. Once the projector is turned on, enter the projector
  • Epson 7900p | User Manual - Page 30
    to your computer. This is available from Epson (see page 15). 1. To use the adapter, remove its cover as shown and set its DIP switches according to the resolution you want to use, such as 16-inch mode. See the instructions included with the adapter. 2. Replace the cover and connect the adapter to
  • Epson 7900p | User Manual - Page 31
    in this chapter, you can use the projector's remote control as a wireless mouse. This lets you control your computer and click through slideshow-style presentations, such as PowerPoint, from up to 30 feet away. The wireless mouse function is supported on systems with a USB port running Windows
  • Epson 7900p | User Manual - Page 32
    connected to either the Computer or BNC ports. The Monitor Out port does not support a DVI connection. Connecting an External Monitor If you want to monitor your presentation close-up (on a monitor placed beside the projector) as well as on the screen, you can connect an external monitor. You can
  • Epson 7900p | User Manual - Page 33
    instead of directly to the audio source lets you use the projector's remote control to adjust the sound.) Connecting Audio Equipment to the Projector To play sound through the projector, follow these steps: 1. Obtain a commercially available stereo mini-jack or RCA-style audio cable. Which cable
  • Epson 7900p | User Manual - Page 34
    Connecting External Speakers To connect speakers to the projector, follow these steps: 1. Obtain the appropriate cable to the stereo mini-jack end of the audio cable to the Audio Out port on the projector. 3. Connect the other end(s) of the cable to your speaker system. You may need to use
  • Epson 7900p | User Manual - Page 35
    can operate the projector without it, the remote control lets you use additional features. See Chapter 3 for instructions on using the remote. Follow the guidelines in this chapter for: ■ Turning the projector on and selecting the image source ■ Troubleshooting display problems ■ Adjusting the image
  • Epson 7900p | User Manual - Page 36
    49. Shutting down the projector correctly prevents premature lamp failure and possible damage from overheating. Turning On Your Equipment Make sure your projector and other equipment are set up as described in Chapter 1. Then follow the instructions below to start the projector and display an image
  • Epson 7900p | User Manual - Page 37
    4. Press the red PPower button on top of the projector-or press the PPower button on the remote control. (If this is your first time using the remote control, make sure the batteries are installed and the on/off switch on the side of the remote is turned on; see page 52.) Power button Turn on
  • Epson 7900p | User Manual - Page 38
    Source buttons either on the projector or the remote control. The Source buttons work as follows: ■ The projector has two Source buttons. remote control has six Source buttons. Use them to switch between equipment connected to the port identified on each button. (The PowerLite 7900p does not support
  • Epson 7900p | User Manual - Page 39
    lens cap is off. ■ If you've connected more than one computer and/or video source, you may need to press one of the Source buttons on the projector's control panel or the remote control between the LCD screen and the projector, or display on both at the same time. It may be labelled CRT/LCD or with
  • Epson 7900p | User Manual - Page 40
    From the Control Panel, open the Display utility. In the Display Properties dialog 're using Macintosh OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select System Preferences, then select Displays.
  • Epson 7900p | User Manual - Page 41
    on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Control Panels, then resolution settings: 1. Click the Monitor icon. Click here Select a Simulscan resolution 2. Select a Simulscan resolution as shown. (Allow a few seconds for the projector
  • Epson 7900p | User Manual - Page 42
    toward the T to decrease it. Focus ring Zoom ring If the image still isn't large enough, you may need to move the projector farther away from the screen. You can also use the E-Zoom buttons on the remote control to zoom in on a portion of the image. See page 57 for instructions. 42 Projecting
  • Epson 7900p | User Manual - Page 43
    positioned where you want it, release the lever to lock the foot in position. 3. If necessary, you can fine-tune the height by turning the projector's rear feet. Raising the projector causes the image to distort or "keystone," but you can manually correct the shape as described in the next section
  • Epson 7900p | User Manual - Page 44
    lens level with the bottom of the screen. Even if the projector is slightly tilted (within a range of 40° up or down), the projector or right), you can correct it using the Keystone keys on the projector's control panel or the projector's Keystone menu (see "Using Keystone Correction" on page 45). ■
  • Epson 7900p | User Manual - Page 45
    Quick Corner Use Quick Corner to correct a trapezoid-shaped image, with no parallel sides: 1. Press the Menu button on the remote control (or on the projector's control panel). 2. Select the Setting menu and press Enter. 3. From the Setting menu, select Keystone and press Enter. 4. Select Quick
  • Epson 7900p | User Manual - Page 46
    ) to adjust the shape. 7. Repeat steps 5 and 6 as needed to adjust any remaining corners. 8. When done, press the ESC button on the remote control or projector's control panel to exit the menu system. If Quick Corner remains selected in the Keystone menu, the Quick Corner screen appears whenever you
  • Epson 7900p | User Manual - Page 47
    Auto button on the remote control (or the Auto/Enter button on the projector's control panel). This automatically resets the projector's tracking, sync, resolution, and position settings. If vertical stripes appear in the projected image and the Auto button doesn't correct the problem, hold down the
  • Epson 7900p | User Manual - Page 48
    off, press the Wall Shot button again to turn it on. Making Initial Color Corrections Press the Wall Shot button on either the remote control or the projector's control panel while projecting an image. Wall Shot's status appears in the upper right corner of your screen. Then you see a sequence of
  • Epson 7900p | User Manual - Page 49
    any equipment plugged into the projector. 2. To turn off the projector, press the red PPower button on the projector or remote control. Power button note When the projector has not received any input signals for 30 minutes, it automatically turns off the projector lamp and enters "sleep mode." This
  • Epson 7900p | User Manual - Page 50
    turn the projector on again, wait until the orange light stops flashing. Then press the P Power button. 4. If you extended the adjustable front foot, press up on the blue foot release lever to retract it. 5. Replace the lens cap and unplug the power cord. 6. If you're using a remote control, set its
  • Epson 7900p | User Manual - Page 51
    1 note For information and resources to help you give the most professional presentation, be sure to visit presentersonline.com. Using the Remote Control The remote control lets you access your projector's features from anywhere in the room-up to 33 feet away. For example, you can turn the
  • Epson 7900p | User Manual - Page 52
    to operate the projector from a greater distance, a remote control cable set is available (see page 15). ■ When presenting in a darkened room, press the light button to make the buttons on the remote light up temporarily. ■ Avoid using the remote under bright fluorescent lamps or in direct sunlight
  • Epson 7900p | User Manual - Page 53
    presentation, see page 59 ■ to use the remote control in place of your computer's mouse, see page 62 ■ to use the remote to control more than one projector, see page 63 note The projector has equivalent buttons that you can use on its control panel: ESC button Arrow buttons Enter button Using
  • Epson 7900p | User Manual - Page 54
    to local regulations. ■ Remove the batteries if you won't be using the projector for a long period of time. Replacing the Batteries If the projector stops responding to the remote control, check the following: ■ Make sure the remote control's ON/OFF switch (shown on page 52) is in the ON position
  • Epson 7900p | User Manual - Page 55
    EasyMP button is not functional with the PowerLite 7900p.) After you select a source, the screen goes dark for a moment before the image appears. note You can use the projector's menus to fine-tune the picture and sound quality as described in Chapter 4. Source buttons Using the Remote Control 55
  • Epson 7900p | User Manual - Page 56
    then press Enter to display it. Currently selected source BNC Computer DVI Video S-Video Preview windows 2. Press one of the Source buttons on the remote control to switch to the desired source, and press Enter to change the source and exit the screen. Or press ESC to exit the preview screen
  • Epson 7900p | User Manual - Page 57
    Turning Off the Picture and Sound You can use the A/V Mute button on the remote control to turn off the image and sound and darken your screen. (If you've connected an external monitor to the projector, it will continue displaying.) This feature is useful if you want to temporarily redirect your
  • Epson 7900p | User Manual - Page 58
    the P-in-P window is connected to the Video or S-Video port. Then select the corresponding video setting: 1. Press the Menu button on the remote control, and enter the Setting menu. 2. Highlight P in P, use the pointer button to select either Composite or S-Video, then press Enter. 3. Press ESC to
  • Epson 7900p | User Manual - Page 59
    , and each one can be customized for a different look. Using the Pointer Tool 1. To activate the pointer tool, press the Effect button on the remote control. A pointer appears on the screen. Pointer If you prefer to use a different style of pointer, continue pressing the Effect button to select the
  • Epson 7900p | User Manual - Page 60
    of the line made with each pointer, and set how fast you can move the pointer across the screen. 1. Press the Menu button on the remote control, highlight the Effect menu, and press Enter. You see this screen: Video Audio Effect Setting User's Logo Advanced1 Advanced2 About Reset All Pointer/Line1
  • Epson 7900p | User Manual - Page 61
    setting to adjust how fast the pointer tool moves across the screen. 4. When done, press ESC until you exit from the menu system. Using the Remote Control 61
  • Epson 7900p | User Manual - Page 62
    Operating Your Computer with the Remote Control If you've connected a computer to the projector with a USB cable, as described on page 31, you can use the remote control in place of your computer's mouse. This gives you more flexibility when delivering PowerPoint and other slideshow-style
  • Epson 7900p | User Manual - Page 63
    than one projector, you can control all the projectors-or just selected ones-by using the projector ID system. To operate a projector, you have to set the remote control's ID to match that of the projector. Or you can control all of the projectors simultaneously by setting the remote control's ID to
  • Epson 7900p | User Manual - Page 64
    steps: 1. Press the ID button on the remote control. You see it light. 2. Press one of the numbered buttons on the remote control to select the desired ID (0 through 9). Select zero to control all projectors, or select a number to match the ID of the projector(s) you want to operate. Nine Zero The
  • Epson 7900p | User Manual - Page 65
    1 Fine-tuning the Projector You can use the projector's on-screen menus to adjust the image, sound, and other features. This chapter Adjusting the image size, shape, and position ■ Adjusting the color ■ Adjusting the sound ■ Customizing projector features ■ Using the projector's security features 65
  • Epson 7900p | User Manual - Page 66
    on the projector to access the Resolution : Auto Manual Select :[ ] Preset Set Reset Execute [ ]: Select [ ]: Enter [Menu]: Exit The menus are listed on the left, and the options available for the highlighted menu are shown on the right. 2. Use the pointer button on the remote control
  • Epson 7900p | User Manual - Page 67
    0000 Sync. : 0 Brightness : 0 - + Contrast : Auto Manual Adjust Sharpness : 0 - + Color Mode Select [Presentation ] Resolution : Auto Manual Select :[ ] Preset Set Reset Execute [ ]: Select [ ]: Enter [Menu]: Exit To restore all the projector settings to their factory-default
  • Epson 7900p | User Manual - Page 68
    69). Adjusting Images from Video Sources 1. Press the Menu button on the remote control, then select the Video menu. You see the Video menu screen. (The the opacity of the projector's LCD panels. You can also adjust the brightness of the lamp itself. Select Brightness Control in the Advanced2 menu,
  • Epson 7900p | User Manual - Page 69
    You can also use the remote control's Auto button to automatically reset the projector's tracking, sync, resolution, and position settings. See : Color Mode Resolution : : Preset Reset Adjust 0000 0 0 - + Auto Manual 0 - Adjust + Select [Presentation ] Auto Manual Select [ ] Set
  • Epson 7900p | User Manual - Page 70
    projector's resolution setting may not match that of your computer. Select Auto to let the projector adjust the resolution automatically, or Manual you use the same computer, simply press the Preset button on the remote control to recall your saved settings. (Press the Preset button repeatedly to
  • Epson 7900p | User Manual - Page 71
    . If you press the Resize button on the remote control, the projector displays the image at the output resolution of the computer (which makes the image larger or smaller, depending on its resolution). If the resolution of the image is the same as the projector's (1024 × 768), pressing Resize has no
  • Epson 7900p | User Manual - Page 72
    Adjusting the Color The projector provides several ways for you to adjust the color: ■ Color Mode button (also in the Video menu) Lets you quickly adjust the color and brightness for various environments. Use either the remote control or the Color Mode setting in the Video menu; you can save a
  • Epson 7900p | User Manual - Page 73
    the remote control. [ ]: Select [ ]: Enter [Menu]: Exit 2. Use the pointer button to highlight the desired option, then adjust it as needed: ■ Volume Adjusts the volume ■ Treble Adjusts the intensity of the treble range ■ Bass Adjusts the intensity of the bass range Fine-tuning the Projector 73
  • Epson 7900p | User Manual - Page 74
    Input (in the Setting menu) Select the setting for the type of equipment you've connected to the BNC ports: Auto: To have the projector automatically detect the signal RGB: For a video player that outputs an RGB video signal Component Video: For a video player that outputs a component video signal
  • Epson 7900p | User Manual - Page 75
    free of charge from http://support.epson.com.) Select RS-232C or USB, depending on the port that's being used for communication with the computer. Turn off the projector and then turn it back on for the new setting to take effect. note Press the Num button on the remote control to use the number
  • Epson 7900p | User Manual - Page 76
    is not receiving a signal. The logo setting displays an image that you previously transferred to the projector (see page 78). ■ Sleep mode (in the Setting menu) When sleep mode is on, the projector turns off the lamp if it has not received any input signals for 30 minutes. Turn sleep mode off if
  • Epson 7900p | User Manual - Page 77
    ensure that no one touches the projector's buttons while you're using the remote control If you create a user's logo for the projector, you can lock the logo the incorrect password 30 times in succession, the projector is locked and you'll need to contact Epson to unlock it. See "Where To Get Help
  • Epson 7900p | User Manual - Page 78
    present image as a user's logo, select Yes and press Enter. A selection box displays over the image. 5. Use the pointer button on the remote control or the arrow buttons on the projector to select the area of the image you want to use. Once you have selected the area, press Enter. 6. When you see
  • Epson 7900p | User Manual - Page 79
    as user's logo?, select Yes and press Enter. Saving the logo takes about 15 seconds. Do not use the projector or other sources (computer, video, etc.) while the logo is being saved. 9. When you see the message highlight ON, and press Enter. 4. Select the Setting menu. Fine-tuning the Projector 79
  • Epson 7900p | User Manual - Page 80
    . Setting a Password 1. Press the Freeze button on the remote control for about 5 seconds until you see the Password Protect menu: note If a password has already been set, you see the Password Protect Release screen. See "Starting the Projector with a Password" on page 82. Password Protect Power
  • Epson 7900p | User Manual - Page 81
    to return to the Password Protect menu. 6. Press the Num button on the remote control to turn off the numeric keypad. Make a note of the password and keep it ON and press Enter. When this feature is on the logo appears whenever the projector is turned on (if the No-Signal Msg. is set to Logo on the
  • Epson 7900p | User Manual - Page 82
    so keep the remote control in a safe place at all times. 6. Press Menu to close the Password Protect menu. 7. Turn off the projector and unplug the power cord to enable password protection. When you turn the projector on again, you will need to enter a password. Follow the instructions in the next
  • Epson 7900p | User Manual - Page 83
    . If you enter an incorrect password 30 times in succession, the projector remains locked and you must contact Epson to unlock it. Disabling the Projector's Buttons When you enable the Operation Lock function, all the projector's buttons are disabled except for the P Power button. 1. Press the Menu
  • Epson 7900p | User Manual - Page 84
    84 Fine-tuning the Projector
  • Epson 7900p | User Manual - Page 85
    from a remote computer in several ways: ■ Use EMP Monitor to see your projectors' status, switch image sources, and control basic settings. ■ Use EMP NetworkManager to receive e-mail notifications alerting you to possible problems. ■ Use a network management utility running SNMP, such as HP OpenView
  • Epson 7900p | User Manual - Page 86
    software CD-ROM includes the software you need to use the projector's EMP Monitor and EMP NetworkManager. note The Easy Management software cannot be installed on Macintosh systems. System Requirements Before you install the software, make sure your computer meets these
  • Epson 7900p | User Manual - Page 87
    Install to install both EMP Monitor and EMP Network Manager. 3. Follow the on-screen instructions to install the software. 4. When you're finished, click Exit. Once installed, you can access these programs from your computer's Start menu. Connecting and Configuring the Projector Before using the
  • Epson 7900p | User Manual - Page 88
    projectors you're monitoring. If you have HP OpenView, a plug-in will be available to allow you to manage your projectors in HP OpenView. Check with your dealer or Epson the projector's IP Address, Subnet Mask, Gateway Address, and MAC Address, as needed. ■ To enter numbers using the remote control,
  • Epson 7900p | User Manual - Page 89
    the Enter button (on the remote control) or the Auto/Enter button (on the projector). This stores the value. 6. When done making all necessary changes, press ESC to exit the menu system. Using EMP Monitor EMP Monitor lets you manage all your projectors using a remote computer. This lets you easily
  • Epson 7900p | User Manual - Page 90
    icon shown above, then select Exit. Registering a Projector Before you can monitor a projector, you have to register it. Follow these steps: 1. Click Start > Programs or All Programs > EPSON Projector > EMP Monitor. You see this screen: Click here 90 Managing the Projector from a Remote Computer
  • Epson 7900p | User Manual - Page 91
    as shown. You see this screen: Click here 3. Click Auto detect to locate projectors currently operating on the network. Or click Manual registration and enter the projector's name and network address. Any projectors found on the network are listed as shown below: note If Auto detect fails to
  • Epson 7900p | User Manual - Page 92
    delete a projector from the list, highlight the projector name, and click Delete. You see this screen with a list of all registered projectors. 5. Click Close. You see the status of each of your registered projectors on the main EMP Monitor screen: 92 Managing the Projector from a Remote Computer
  • Epson 7900p | User Manual - Page 93
    (green) Projecting; problems detected (dark) Turned off; problems detected Network error (for example, not connected to network, or power cable disconnected). You may also see this error if Network OFF is selected in Standby Mode (see page 75). Managing the Projector from a Remote Computer 93
  • Epson 7900p | User Manual - Page 94
    Chapter 7 for recommended solutions to problems): Error icons Lamp replacement notification (the lamp is nearing the end of its life; see page 104) High-speed cooling in progress (the projector is getting too hot but continues to operate) Lamp out or lamp cover open Overheating (projection is turned
  • Epson 7900p | User Manual - Page 95
    Monitor checks the projector status: 1. From the Tool menu, select Configuration. You see this screen. 2. Select the desired update interval and click OK. note If you want EMP Monitor to run whenever you start your computer, click Add to Startup. Managing the Projector from a Remote Computer 95
  • Epson 7900p | User Manual - Page 96
    NetworkManager, click Start > Programs or All Programs > EPSON Projector > EMP NetworkManager. You see the EMP NetworkManager screen. The projectors you've already registered through EMP Monitor appear as icons. 2. If you'd like to register a projector manually and you know its IP address, double
  • Epson 7900p | User Manual - Page 97
    each projector from EMP NetworkManager: 1. Right-click the icon of the projector whose projectors displayed as shown: 2. Double-click the icon for the projector whose e-mail settings you want to create. Enter your password, if you created one (see above). Managing the Projector from a Remote
  • Epson 7900p | User Manual - Page 98
    's network address configuration (turning off DHCP enables the manual settings). ■ You can give the projector a name-up to 15 characters long, including the following symbols Naming the projector helps you identify it in EMP Monitor and EMP NetworkManager, especially if you're managing more than
  • Epson 7900p | User Manual - Page 99
    of the addresses you provided using EMP NetworkManager. The message includes the heading "EPSON Projector" in the subject line. The body of the message contains: ■ the name of the projector ■ the projector's IP address ■ a description of the problem The problem descriptions are similar to the errors
  • Epson 7900p | User Manual - Page 100
    100 Managing the Projector from a Remote Computer
  • Epson 7900p | User Manual - Page 101
    to cool the projector. The only parts you should replace are the lamp and air filters (when you order a new lamp, replacement filters come with it). If any other part needs replacing, contact your dealer or a qualified servicer. This chapter covers the following: ■ Cleaning the lens ■ Cleaning the
  • Epson 7900p | User Manual - Page 102
    canister of compressed air to remove dust. ■ To remove dirt or smears on the lens, use lens-cleaning tissue. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens surface. Remove the cap before cleaning Cleaning the Projector Case Before you clean the case, first turn off the
  • Epson 7900p | User Manual - Page 103
    with dust, preventing proper ventilation. This can cause overheating and damage the projector. Follow these steps: 1. Turn off the projector and unplug the power cord. 2. To clean the intake vents, Epson recommends using a small vacuum cleaner designed for computers and other office equipment
  • Epson 7900p | User Manual - Page 104
    flashes orange. To maintain projector brightness and image quality, replace the lamp as soon as possible. ■ The lamp warning light flashes red (the lamp is burnt out). Contact your dealer or call Epson at (800) 873-7766 in the United States for a replacement lamp. Request part number V13H010L22. In
  • Epson 7900p | User Manual - Page 105
    and remove the air filters at the side and bottom of the projector. . . . and here Slide the filter up here . . . 5. Insert the two new air filters. They should click into place. 6. Insert the screwdriver supplied with the spare lamp, or some other flat-tipped screwdriver, into the space beside the
  • Epson 7900p | User Manual - Page 106
    contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. When you get a replacement lamp for your projector, new air filters are included. This is a good time to install them (see page 104). 8. Grasp the wire handle as shown and
  • Epson 7900p | User Manual - Page 107
    Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector's menu. 1. Plug the projector in and turn it on. 2. Press the Menu button on the remote control (or on the projector's control panel). You see the main menu. 3. Use the pointer button on the remote control
  • Epson 7900p | User Manual - Page 108
    note Epson shall not be liable for any damages incurred during transportation. Transporting the Projector The projector contains many glass and precision parts. Follow these guidelines to prevent injury or damage: ■ When hand-carrying the projector, you should use the handle to lift it only a short
  • Epson 7900p | User Manual - Page 109
    . This chapter explains the following: ■ Using the projector's on-screen help system ■ What to do when the projector's status lights flash ■ Solving problems with the image or sound ■ Solving problems with Easy Management ■ Solving problems with the remote control ■ Contacting technical support 109
  • Epson 7900p | User Manual - Page 110
    or your audio isn't working, you can get help by pressing the blue ? Help button on top of the projector or on the remote control. The following choices are available: ■ Problems with image ■ Problems with sound ■ Language change Follow these steps to get help: 1. Press the blue ? Help button on the
  • Epson 7900p | User Manual - Page 111
    in and turn on the projector. If this doesn't solve the problem, check the lights on top of the projector. What To Do When the Lights Flash The lights on top of the projector indicate the projector's status and let you know when a problem occurs. Temperature light Lamp light Power light Refer to
  • Epson 7900p | User Manual - Page 112
    filter, the problem may be caused by damage to the cooling fan or temperature sensor. Contact Epson for help. Warning: Except as specifically explained in this User's Guide, do not attempt to service this product yourself. It's time to replace the lamp. See page 104 for instructions. If you continue
  • Epson 7900p | User Manual - Page 113
    come on. Make sure the power cord is connected securely both at the power outlet and the projector. If you have just replaced the lamp, make sure the cover is securely fastened. Viewing Lamp Usage and Other Information Use the About menu to view information about image source, the display settings
  • Epson 7900p | User Manual - Page 114
    your computer. ■ If you've connected a computer and one or more video sources, you may need to press one of the Source buttons on the projector or remote control to select the correct source. Allow a few seconds for the projector to sync up after pressing the button. 114 Solving Problems
  • Epson 7900p | User Manual - Page 115
    Check your notebook's manual or online help for details. On most systems, the key lets you toggle between the LCD screen and the projector, or display on both at the same time. ■ Depending on your computer's video card, you might need to use the Display utility in the Control Panel to make sure
  • Epson 7900p | User Manual - Page 116
    × 1200), and the frequency is supported by the projector (see page 128). If necessary, change your computer's resolution setting as described in the following section. Only part of the computer image is displayed. ■ Press the Auto button on the remote control. ■ Make sure the image Position setting
  • Epson 7900p | User Manual - Page 117
    image quality when the image is displayed simultaneously on your notebook computer and the projector, turn off the notebook's LCD display. The image is blurry. ■ There may be dirt or smears on the lens. Clean the lens as described on page 102. ■ Adjust the focus using the focus ring. ■ Make sure
  • Epson 7900p | User Manual - Page 118
    Auto button on the remote control. This resets the projector's tracking and sync settings. ■ If further adjustment is needed, you can fine-tune the Tracking and Sync settings manually using the Video menu as white background. 2. Adjust the Tracking to eliminate vertical stripes. 118 Solving Problems
  • Epson 7900p | User Manual - Page 119
    option in the projector's Video menu the volume control on your projector and your computer's headphone jack or audio out jack. ■ Make sure the Windows volume controls on your computer are not turned all the way down or set to Mute. You may be able to check this by clicking the volume control
  • Epson 7900p | User Manual - Page 120
    , 2000, or NT 4.x, you must be logged in as the Administrator. ■ Try restarting your computer. Solving Problems with the Remote Control The projector doesn't respond to remote control commands. ■ If you're using the remote control for the first time, be sure to push up on the on/off switch, as shown
  • Epson 7900p | User Manual - Page 121
    following information ready: ■ Product name (Epson PowerLite 7900p) ■ Product serial number (located on the bottom of the projector) ■ Proof of purchase (such as a store receipt) and date of purchase ■ Computer or video configuration ■ Description of the problem You can purchase screens, carrying
  • Epson 7900p | User Manual - Page 122
    122 Solving Problems
  • Epson 7900p | User Manual - Page 123
    Installation This appendix provides guidelines on installing the projector in a permanent location, such as a theater or conference room. Installation Guidelines The projector can be installed for four different viewing setups: front projection, ceiling mounting, rear projection onto a semi
  • Epson 7900p | User Manual - Page 124
    you place the lens lower than the bottom of the screen, you'll have to tilt the projector upward if you want to fill the whole screen with the image. If you want to be able to control the projector's settings from a remote computer, see Chapter 5. You can also use the remote control to operate more
  • Epson 7900p | User Manual - Page 125
    Technical Specifications General Type of display Size of LCD panels Lens Resolution (native format) Color reproduction Brightness Contrast ratio ceiling mount) 5 W monaural 4:3 (horizontal:vertical) 1:1.35 36 dB Automatic with manual adjustment capability, ± 40° (vertical), ± 20° (horizontal) 125
  • Epson 7900p | User Manual - Page 126
    not in use to prolong the life of the projector. Projection Lamp Type UHE (Ultra High Efficiency) Power consumption 250 W Lamp life Up to 2000 hours (high brightness mode) Up to 3000 hours (low brightness mode) Part number V13H010L22 Remote Control Range 33 feet (10 meters) Batteries
  • Epson 7900p | User Manual - Page 127
    to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing 0 to 7,500 ft (0 to 2,286 m) Safety United States Canada CE Marking FCC 47CFR Part 15B Class B (DoC) UL60950 Third Edition ICES-003 Class B CSA C22.2 No. 60950 Directive 73/23/EEC Directive 89/336/EEC EN 55022, EN 55024
  • Epson 7900p | User Manual - Page 128
    projector supports NTSC, PAL, and SECAM international video standards, as well as the monitor display formats listed below. To project images output from a computer, the computer's video card must be set at a refresh rate (vertical frequency) that's compatible with the projector 85 Resolution 640
  • Epson 7900p | User Manual - Page 129
    Mode Refresh Rate (Hz) Resolution UXGA-60 60 UXGA-65 65 UXGA-70 70 UXGA-75 75 UXGA-80 80 UXGA-85 85 1600 × 1200* (625i) 50 SDTV (625p) 50 1024 × 768 1024 × 768 1024 × 768 1024 × 768 *The image is resized using Epson's SizeWise™ Technology. Appendix B: Technical Specifications 129
  • Epson 7900p | User Manual - Page 130
    130 Appendix B: Technical Specifications
  • Epson 7900p | User Manual - Page 131
    A Appendix C: Notices This appendix includes safety instructions and other important information about your Epson PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or
  • Epson 7900p | User Manual - Page 132
    lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. ■ Unplug the projector during lightning storms or when it will not be used for extended periods. ■ Do not place the projector and/or remote control
  • Epson 7900p | User Manual - Page 133
    These conditions commonly cause problems for most infrared-controlled equipment. Try the following: ■ The remote control's battery may be low on power; replace it. ■ Dim the ambient lighting and/or turn off any fluorescent lights. ■ Close any window coverings and/or move the projector out of direct
  • Epson 7900p | User Manual - Page 134
    Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part Epson Type of Product: Projector Model: EMP-7900/EMP-7900NL Marketing Name: PowerLite 7900p
  • Epson 7900p | User Manual - Page 135
    comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there
  • Epson 7900p | User Manual - Page 136
    purchase (except that the warranty period is 90 days for projector lamps). For warranty service, you must provide proof of the date of original purchase. What Epson Will Do To Correct Problems: If you elect carry-in warranty service, please bring the product securely packaged in its original
  • Epson 7900p | User Manual - Page 137
    warranty gives you specific legal rights, and you may also have other rights, which vary from jurisdiction to jurisdiction. To locate the Authorized Epson Servicer nearest you, call the Epson ConnectionSM at (800) 637-7661 + PIN or (562) 276-4394 in the U.S. and (905) 709-3839 in Canada or write to
  • Epson 7900p | User Manual - Page 138
    138 Appendix C: Notices
  • Epson 7900p | User Manual - Page 139
    , 15, 29 illustrations, 13 mouse, 31 ordering, 15 remote control cable set, 15 S-Video, 14, 15, 22 Carrying case, 15, 108 Ceiling mount, 15, 123 Cleaning air filter, 103 to 104 lens, 102 projector case, 102 Color correcting with Wall Shot, 48 to 49 problems, 119 settings, 72 Color Mode setting, 72
  • Epson 7900p | User Manual - Page 140
    Index H HDTV formats, supported, 129 Height of image, adjusting, 43 Help system, using, 110 Help, Epson, 11, 121 HP OpenView, 85 I ID projector, 123 to 124 K Kensington anti-theft device, 15, 19 Keystone correction, 44 to 45, 71, 117, 124, 125 L Lamp number of hours used, 113 ordering, 15 replacing
  • Epson 7900p | User Manual - Page 141
    72 tips and training, 11 using the pointer tool, 59 to 61 Presenters Online, 11, 121 Previewing image sources, 56 PrivateLine Support, 11, 121 Problems color, 119 image, 114 to 119 monitoring projector, 120 no signal, 39, 114 to 115 remote control, 120 sound, 119 using on-screen help, 110 Index 141
  • Epson 7900p | User Manual - Page 142
    Remote control as wireless mouse, 62 battery used, 126 connecting cable for mouse, 31 ID setting, 64 information, 133 problems, 120, 133 range, 126 replacing batteries, 54 running slideshow with, 31 specifications, 126 storing, 52 troubleshooting, 120 turning on, 52 using, 51 to 64 Replacing lamp
  • Epson 7900p | User Manual - Page 143
    , 126 environmental, 127 general, 125 lamp, 126 lens, 125 remote control, 126 resolution, 125 safety, 127 Standby Mode setting, 75, 93, 95, 98 Startup screen creating, 78 to 79 displaying, 79 to 82 user's logo, see User's Logo Status lights, 111 to 113 Support, Epson, 11, 121 S-Video cable, 14
  • Epson 7900p | User Manual - Page 144
    W Wall Shot, 48 to 49 Warning lights, 111 to 113 Warranty, 12, 136 to 137 Wireless, mouse, 31, 62 Z Zoom ratio, 125 Zooming image, 42, 57 to 58 144 Index
  • Epson 7900p | User Manual - Page 145
    light Air exhaust vent Lamp light Power light Control panel Remote control receiver Foot release lever Adjustable foot Lens cover Air filter Handle Back USB port Network port Monitor-out port Control port for service use only Computer port DVI Remote control port receiver Security lock
  • Epson 7900p | User Manual - Page 146
    tool Help button Provides on-screen help Source buttons Switch between equipment connected to projector ports Auto button Optimizes tracking, sync, resolution, and position Preset button Retrieves saved settings for Video menu Volume controls Control sound ID button Sets remote control ID code
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
Epson
®
PowerLite
®
7900p
Multimedia Projector
User’s Guide