Epson 826W Quick Setup
Epson 826W - PowerLite WXGA LCD Projector Manual
 |
UPC - 010343873056
View all Epson 826W manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson 826W manual content summary:
- Epson 826W | Quick Setup - Page 1
® 85/825/826W Quick Setup Before using the projector, make sure you read the safety instructions in the User's Guide on your projector CD. Connect the projector Choose from the following connections: Computer Monitor Port Connect a computer using the VGA cable that came with the projector. Connect - Epson 826W | Quick Setup - Page 2
camera Thumb drive DC-06 document camera If you connect a digital camera or USB storage device, you can use the projector's Slideshow feature. See the EasyMP Operation Guide on your projector CD. For information on playing sound through the projector or connecting an external monitor, see the User - Epson 826W | Quick Setup - Page 3
you don't see an image, press the Source Search button on the projector or the Search button on the remote control to select the image source. NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press - Epson 826W | Quick Setup - Page 4
like or , you've placed the projector off to one side of the screen the projector to correct it. Using the remote projector on and off Turn off projector display and sound Change presentation slides (USB connection only) Navigate projector menus Choose which source to display Control projector - Epson 826W | Quick Setup - Page 5
EMP NS Connection on your computer. Windows: Select Start > Programs or All Programs > EPSON Projector > EMP NS Connection. Mac OS® X: Double-click the EMP NS Connection icon in Accessories." For more information about using the projector on a network, see your User's Guide and EasyMP Operation - Epson 826W | Quick Setup - Page 6
network assigns addresses automatically, turn on the DHCP setting. • If your network does not assign addresses automatically, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed. To enter numbers, use the buttons on the remote control to highlight the - Epson 826W | Quick Setup - Page 7
Troubleshooting If you see a blank screen... If you see a blank screen or the No signal message after turning on your computer, check the following: • Make sure the power light on the projector is green and not flashing, and the A/V Mute slide is open. • Press the Source Search button on the - Epson 826W | Quick Setup - Page 8
information about using the projector, install the manuals from your projector CD. Telephone Support Services To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is available 6 AM to
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User’s Guide
on your projector CD.
Connect the projector
Choose from the following connections:
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end to the projector’s
Computer1
or
Computer2
port, and
the other end to your computer’s
monitor port. If you are using a
notebook, switch it to external display. You can also connect an audio cable or
microphone.
Computer USB Port
Connect a computer (Windows
®
2000 or later only) using the USB cable that
came with the projector.
Connect the square end of the USB cable to the projector’s
Type B
(square) USB port. Connect the flat end of the cable to any USB port on your
computer. You can also connect an audio cable or microphone.
Follow the on-screen instructions to install the Epson USB Display software.
Then press the
USB
button on the remote control.
Network (LAN)
Connect the projector to your network using an Ethernet
®
cable. See “Project
Over the Network” on the back of this sheet for more information.
PowerLite
®
85/825/826W
*411676200*
*411676200*