Epson 8300NL Quick Start

1

Turn on your laptop.

2

Remove the projector’s lens cover.

3

Make sure the

power light

is orange and not flashing.

4

Press the

Power

button to turn on the projector.

S

T

A

R

T

H

E

R

E

T

urn on your equipment

C

onnect the projector

to your laptop

Follow these instructions to connect the projector to your

laptop. For other setup options, see your

User’s Guide

.

EPSON

®

PowerLite

®

8300i

Quick Setup

1

Locate the required cables:

2

Connect the computer cable to the

Computer 1

port on the projector.

3

Connect the other end to your laptop’s video-out

or

monitor port.

4

Plug in the power cord.

Power cord

Computer cable

Make sure power light

is not flashing

1

If you’ve turned on your laptop and you don’t see an image, press

the

Computer/DVI

button on the projector to select

Computer 1

as the image source.

NOTE:

If you still see a blank screen or have other difficulties,

see the troubleshooting tips on the back of this sheet.

2

Adjust the sharpness, size, and height of the image:

3

If your image looks like

or

, you’ve placed the projector off to

one side of the screen at an angle. Place it directly in front of the

center of the screen, facing the screen squarely.

4

If your image looks like

or

, use the

Keystone

button to

square up the image.

Lens Shift

to adjust the

image height

Zoom

to enlarge

the image

Focus

to sharpen

the image

A

djust the image

CAUTION:

Before unplugging the projector...

To shut down the projector properly

1

.

Press the

Power

button twice. Let the projector cool while

the power light flashes orange (about 45 seconds).

2

.

Once the light stops flashing and stays on, it’s safe to unplug

the projector.

Never unplug the projector when the

power light is green or

flashing orange.

Power button

Turn over

Epson 8300NL Quick Start

Epson 8300NL - PowerLite XGA LCD Projector Manual

Epson 8300NL manual content summary: