Epson 9800 Product Information Guide

Epson 9800 - Stylus Pro Color Inkjet Printer Manual

Get Epson 9800 - Stylus Pro Color Inkjet Printer PDF manuals and user guides
UPC - 010343857735
View all Epson 9800 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson 9800 manual content summary:

  • Epson 9800 | Product Information Guide - Page 1
    Epson Stylus Pro 7800 and 9800 Printer Parts - Front cover Roll paper cover Ink cartridge compartment Paper basket Paper lever Control panel Ink cartridge compartment Printer Specifications Printing Printing method On-demand ink jet Nozzle configuration Black: 180 nozzles × 3 (photo
  • Epson 9800 | Product Information Guide - Page 2
    Print quality guarantee: 40 to 60% RH Optimal operation: 35 to 45% RH Paper The allowable paper dimensions are shown below: Roll paper Cut sheets Epson Stylus Pro 8 to 24 in. 7800 (203 to 610 mm) wide letter size up to 24 in. wide Epson Stylus Pro 8 to 44 in. letter size up to 44 in. 9800
  • Epson 9800 | Product Information Guide - Page 3
    the Black Ink Conversion Kit included with your printer. Changing black ink uses about 20% of your ink and maintenance tank, and should be performed infrequently. User-Replaceable Parts You can order these user-replaceable parts: Part Relacement Ink Maintenance Tank Replacement Printer Cutter
  • Epson 9800 | Product Information Guide - Page 4
    Item Settings/Explanation PRINTER STATUS (continued) JOB HISTORY Ink used in milliliters, and paper in square centimeters, for each saved job TOTAL PRINTS Number of pages printed SERVICE LIFE E*****F for CUTTER, CR MOTOR (carriage) PF MOTOR (paper feed) HEAD UNIT (print head) CLEANING UNIT
  • Epson 9800 | Product Information Guide - Page 5
    Epson Stylus Pro 7800 and 9800 Printing a Status Sheet The status sheet shows some of the current default settings, the amount of ink remaining in each cartridge, the page count, and the status of the cutter blade, maintenance tank, and other printer parts. Note: You can replace the ink cartridges,
  • Epson 9800 | Product Information Guide - Page 6
    sure the print head needs cleaning, as described above. 2. Make sure the printer is ready and the red B ink light on the printer's LCD display is not on or flashing. 3. Press the Menu button. 4. Press the d button until MAINTENANCE is highlighted, then press Menu. 6 - Epson Stylus Pro 7800 and 9800
  • Epson 9800 | Product Information Guide - Page 7
    until MAINTENANCE is highlighted, then press Menu. 3. Press Menu again to select CUTTER REPLACEMENT. 4. Press the button. The print head moves to the replacement position. OPEN FRONT COVER TO SEE CUTTER REPLACEMENT LABEL is displayed. 5. Open the front cover. 8/05 Epson Stylus Pro 7800 and 9800
  • Epson 9800 | Product Information Guide - Page 8
    Epson Stylus Pro 7800 and 9800 6. When SEE LABEL TO REPLACE CUTTER appears on the LCD display, hold down the side pin as shown and turn the latch to the right. Installing the New Cutter Blade Remove the new blade from its package, then follow these steps to install it: 1. Insert the new cutter as
  • Epson 9800 | Product Information Guide - Page 9
    % to nearly full Tank nearly full Tank full Tank error or no maintenance tank The Epson Stylus Pro 7800 has one maintenance tank (on the right side), and the 9800 has two (one on either side). Replacement tanks are available from Epson (part number C12C890191). The printer will not print if one of
  • Epson 9800 | Product Information Guide - Page 10
    Epson Stylus Pro 7800 and 9800 10 - Epson Stylus Pro 7800 and 9800 8/05
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Epson Stylus Pro 7800 and 9800
8/05
Epson Stylus Pro 7800 and 9800 - 1
Printer Parts
-
Printer Specifications
Printing
Electrical
Control
panel
Front cover
IEEE 1394 FireWire
®
interface connector
USB
interface
connector
AC
inlet
Ink cartridge
compartment
Paper lever
Ink cartridge
compartment
Roll paper cover
Paper
basket
Maintenance
tank
Optional
interface
card slot
cover
Printing
method
On-demand ink jet
Nozzle
configuration
Black: 180 nozzles
×
3 (photo black or
matte black, light black, light light black)
Color: 180 nozzles
×
5 (cyan, magenta, light
cyan, light magenta, yellow)
Resolution
Maximum 2880 dpi
×
1440 dpi
Print direction
Unidirectional/Bidirectional
Control code
Epson ESC/P
®
Raster
Photographic Driver
Line spacing
1/6 inch or programmable in
1/1440-inch increments
Paper feed speed
245 ±10 milliseconds per 1/6-inch line
RAM
64MB (Epson Stylus Pro 7800)
128MB (Epson Stylus Pro 9800)
Specification
Description
Input voltage range
90 to 264 V
Rated frequency range
50 to 60 Hz
Input frequency range
49 to 61 Hz
Rated current
1.0 A at 120 V
0.5 A at 220 V
Power consumption
Epson Stylus Pro 7800:
Approx. 50 W or less (ISO 10561 Letter
Pattern)
6 W or less in sleep mode
1 W or less in power off mode
Epson Stylus Pro 9800:
Approx. 55 W or less (ISO 10561 Letter
Pattern)
6 W or less in sleep mode
1 W or less in power off mode