Epson ActionNote 910C User Manual

Epson ActionNote 910C Manual

Get Epson ActionNote 910C PDF manuals and user guides View all Epson ActionNote 910C manuals
Add to My Manuals
Save this manual to your list of manuals

Epson ActionNote 910C manual content summary:

  • Epson ActionNote 910C | User Manual - Page 1
  • Epson ActionNote 910C | User Manual - Page 2
    , either express or implied by or with respect to anything in this manual, and shall not be liable for any implied warranties of merchantability and and ActionPort are trademarks of Epson America, Inc EPSON Connection is a service mark of Epson America, Inc General notice: Other product names used
  • Epson ActionNote 910C | User Manual - Page 3
    in this User's Guide, do not attempt to service the computer yourself. Unplug the computer and refer servicing to qualified service personnel if the performance. Adjust only those controls that are covered by the operating instructions When traveling by airplane,be sure to take your computer into
  • Epson ActionNote 910C | User Manual - Page 4
    de Sécurité Lire attentivement les instructions sulvantes et les conserver pour les consulter en cas de besoin. Observer soigneusement tous les avertissements et directives marques sur l'ordinateur et I'adaptateur secteur. Débrancher l'
  • Epson ActionNote 910C | User Manual - Page 5
    Wichtige Sicherheitschinweise Bitte lesen Sie diese Sicherheitshinweise, und heben Sie sich zur späteren Verwendung auf. Beachten Sie alle Warnungen und Anweisungen, die auf dem Computer und dem Wechselstromadapter angebracht sind. Schalten Sie den Computer vor der Reinigung aus. Verwenden Sie zur
  • Epson ActionNote 910C | User Manual - Page 6
    installation This equipment generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio and television reception. However, there is no guarantee that interference will not occur in a particular
  • Epson ActionNote 910C | User Manual - Page 7
    Contents 1 Getting Started Opening Your Computer 1-2 Powering Your Computer 1-2 Connecting the AC Power Adapter ........ 1-3 Turning the Computer On and Off 1-4 Checking the Indicator Lights 1-4 Adjusting the Screen Controls 1-6 Using the ActionPoint Touchpad 1-7 Learning More About
  • Epson ActionNote 910C | User Manual - Page 8
    4 Caring for Your Computer Protecting the Hard Disk Drive 4-2 Moving and Storing the Computer 4-3 Cleaning Your ActionNote 4-4 Cleaning the ActionPoint Touchpad 4 -4 Cleaning the Diskette Drive 4 -4 5 Upgrading Internal Components Upgrading the Hard Disk Drive 5-1 Removing the Hard Disk Drive
  • Epson ActionNote 910C | User Manual - Page 9
    Where to Get Help 7-1 Electronic Support Services 7-2 Identifying Your System 7-4 Error Messages 7-5 Troubleshooting Your ActionNote 7-5 The Computer Won't Start 7-6 The LCD Screen Is Blank 7-8 The Computer Locks Up 7-9 Your Password Isn't Working 7-10 You Can't Access Data on
  • Epson ActionNote 910C | User Manual - Page 10
    B Using Optional Equipment Using PC Cards B-1 Using the ActionPort Replicator B-3 Connecting the Computer to the ActionPort Replicator B-4 Using the Built-in Ports B-6 Using an External Monitor B-6 Using an External Keyboard Mouse, or Other Pointing Device B-7 Using the International AC Power
  • Epson ActionNote 910C | User Manual - Page 11
    card. If you haven't chosen an operating system yet, please see the instruction sheet "Choosing Your Operating System." If you have questions, this manual or the online version should provide you with answers. Read the troubleshooting information in Chapter 7 or call the EPSON Connection SM at (800
  • Epson ActionNote 910C | User Manual - Page 12
    Opening Your Computer To open your ActionNote, slide the latches on each side of the computer's lid forward and lift up the screen. Powering Your Computer Your computer is shipped with a charged battery and is ready to use when you take it out of the box. However, to keep your battery charged, use
  • Epson ActionNote 910C | User Manual - Page 13
    computer outside the United States, you have the international AC power adapter. See "Using the International AC Power Adapter" in Appendix B of the online manual for more information. Follow these steps to connect the AC power adapter: 1. Plug the connector into the DC-in port on the back of the
  • Epson ActionNote 910C | User Manual - Page 14
    Recharging the battery takes about 3 hours with the computer turned on, and about 2 hours when it is turned off. While it recharges, the charge indicator light is orange. When the battery is fully charged, it is green. Turning the Computer On and Off The on/off button is beneath the screen on your
  • Epson ActionNote 910C | User Manual - Page 15
    Adjusting the Screen Controls The screen contrast and brightness controls are located at the bottom of the screen. Slide the contrast control to the right to increase the contrast, or to the left to decrease it. On dual scan screens only, slide the brightness control to the right to lighten the
  • Epson ActionNote 910C | User Manual - Page 16
    Using the ActionPoint Touchpad You can move your cursor on the screen by sliding your finger along the built-in ActionPoint TM touchpad. It works with any software application that uses PS/2® compatible mouse drivers, and has a utility that lets you adjust its response. To move the cursor, slide
  • Epson ActionNote 910C | User Manual - Page 17
    pointer continues to move in the same direction until you lift or move your finger. This feature is called. "Edge Motion." When software manuals tell you to use your mouse, use these ActionPoint equivalents: Touchpad movements Mouse Click Double-click Drag Click and drag Select Right mouse button
  • Epson ActionNote 910C | User Manual - Page 18
    Using the Keyboard Your computer's keyboard has 85 keys that provide the same functions as a full-sized 101-key keyboard, thanks to function keys and an embedded numeric keypad. The Fn key provides a second function for other keys. The keyboard on the ActionNote is available with different layouts
  • Epson ActionNote 910C | User Manual - Page 19
    , you may need the diskettes to set up a new printer or re-install a program. You have utilities that let you create these diskettes. See the instruction sheet "Choosing Your Operating System." 1-10 Getting Started
  • Epson ActionNote 910C | User Manual - Page 20
    2 Powering the Computer This chapter describes how to conserve your computer's battery and save energy using the power management tools supplied. Using the AC Power Adapter The AC power adapter charges the battery and runs the computer off power from an electrical outlet. Use the adapter whenever
  • Epson ActionNote 910C | User Manual - Page 21
    "Using the International AC Power Adapter" and 'Using the Automobile Adapter" in Appendix B of the online manual for more information. CAUTION To avoid damaging the computer, use only adapters designed for the ActionNote 900 series computers. Using the Battery The removable NiMH
  • Epson ActionNote 910C | User Manual - Page 22
    Recharging the Battery The battery that comes with your system is rechargeable. It takes approximately 2 hours to charge a completely discharged battery when the computer is off or when it is in Suspend mode. If you use the system while the battery is recharging, it can take up to 3 hours. If you
  • Epson ActionNote 910C | User Manual - Page 23
    Conditioner" in Appendix B of the online manual for more information. NOTE Contact your localgovernment waste management agency for recycling information on rechargeable batteries. Follow these steps to replace the battery: 1. Save any
  • Epson ActionNote 910C | User Manual - Page 24
    5. Insert the new battery into the compartment at an angle and then lower it into place. Using Power Management Your ActionNote offers a variety of power management features to help you conserve battery power. Your computer has three power-saving modes: Idle, Standby, and Suspend. These modes
  • Epson ActionNote 910C | User Manual - Page 25
    You can press the Suspend/Resume button (located between the brightness and contrast controls) at any time to enter Suspend mode and temporarily stop system activity. After you press Suspend/Resume, it takes a moment for the computer to enter Suspend mode. Then the Suspend indicator light comes on
  • Epson ActionNote 910C | User Manual - Page 26
    either connect the AC power adapter or turn off the computer and replace the battery (as described earlier in this chapter). In addition, the computer can be set up to enter Suspend mode when the battery power reaches a minimum level. This protects the contents of your computer's memory for several
  • Epson ActionNote 910C | User Manual - Page 27
    For instructions on setting up your ActionNote to use the Save to Disk and Instant On features, see "Using Instant On and Saving to Disk" in Chapter 6.
  • Epson ActionNote 910C | User Manual - Page 28
    3 Getting to Work This chapter contains practical information about using your ActionNote. Reading it now can save you time later. Using Passwords Passwords help protect data from theft. Your ActionNote offers two types of passwords: a Setup password that controls access to the Setup utility, and a
  • Epson ActionNote 910C | User Manual - Page 29
    Entering a Password Whether the computer is configured with a System or Setup password, you enter the password in the same way. When you turn on your system (for the System password) or access Setup (for the Setup password), you see this prompt: Enter password: Type the correct password and press
  • Epson ActionNote 910C | User Manual - Page 30
    Using Diskettes You can use either 720KB double-density or 1.44MB high-density, double-sided diskettes in your 35-inch, 1.44MB diskette drive. To insert a diskette, hold it with the label facing up and the shutter leading into the drive. Slide it all the way into the drive. To remove the diskette,
  • Epson ActionNote 910C | User Manual - Page 31
    and reloads the operating system. To reset the computer, hold down the Ctrl key and press the Alt and Del keys simultaneously. Then follow any instructions you see. Working Comfortably It's easy to spend a lot of time working on the computer. But too much work time without a break can cause
  • Epson ActionNote 910C | User Manual - Page 32
    to prevent damage to the pins in the ports. Be sure you turn off the computer before you connect devices other than PC cards that support hot swapping. Caring for Your Computer 4-1
  • Epson ActionNote 910C | User Manual - Page 33
    Protecting the Hard Disk Drive Your hard disk drive is designed for travel and lots of use. Follow. these precautions, however, to protect your data and prolong hard disk life. Never turn off or reset the computer when it is copying data to or from the hard disk drive (the indicator light is on).
  • Epson ActionNote 910C | User Manual - Page 34
    Moving and Storing the Computer Before you move your ActionNote, make sure the power is off and the screen is closed. Remove any diskettes. Use a carrying case or equivalent. If you have any devices attached, make sure they are turned off and unplugged. The ActionNote has an operating temperature
  • Epson ActionNote 910C | User Manual - Page 35
    . The drive heads are exposed to magnetic contaminants in the air and on diskettes. Many diskette manufacturers offer diskette drive cleaning kits. Just follow the instructions in the kit. 4-4 Caring for Your Computer
  • Epson ActionNote 910C | User Manual - Page 36
    drive and system memory. Upgrading the Hard Disk Drive If you need to remove the existing drive, just follow the instructions below. You won't need any tools. Your ActionNote supports EPSON-qualified, IDE hard disk drives with a 2.5-inch form factor and a maximum height of 19 mm. Contact the EPSON
  • Epson ActionNote 910C | User Manual - Page 37
    Follow these steps to remove the drive: 1. Turn off the computer and disconnect any external devices or cables. 2. Close the LCD screen and turn the computer over. 3. Press the latch away from the hard disk drive cover and slide the cover back slightly. Then lift the cover off, as shown. 5-2
  • Epson ActionNote 910C | User Manual - Page 38
    4. Pull up on the two metal tabs to disconnect the drive, and remove it from the case. 5. If you need to disconnect the connector card, hold it by the edges and pull it away from the drive, as shown below. Upgrading internal Components 5-3
  • Epson ActionNote 910C | User Manual - Page 39
    Replacing a Hard Disk Drive Follow these steps to replace a hard disk drive. If your new drive already has the connector card attached, start with step 3. 1. If necessary, attach the connector card. Align the holes in the card with the group of 44 pins on the right side of the drive connector. Make
  • Epson ActionNote 910C | User Manual - Page 40
    The hard disk drive compartment on your ActionNote can accommodate IDE standard drives up to 19 mm high. If the drive that came with your computer is less than 19 mm high, it is installed above a black foam spacer. If you are going to install a 19 mm drive, remove the spacer from the compartment
  • Epson ActionNote 910C | User Manual - Page 41
    6 to make sure the computer recognizes your new drive. 6. Then create a 26MB partition on the drive. See your operating system documentation for instructions. After you install the operating system, run PHDISK to configure the partition. See "Using Instant On and Saving to Disk" in Chapter 6 for
  • Epson ActionNote 910C | User Manual - Page 42
    Removing and Replacing the Keyboard You need to remove the keyboard to install memory. However, you don't need to disconnect the keyboard cables. Removing the Keyboard Follow these steps to remove the keyboard 1. Turn off the computer and disconnect the AC power adapter. 2. Disconnect any attached
  • Epson ActionNote 910C | User Manual - Page 43
    5. Use a small screwdriver to gently pry up the plastic strip above the keyboard. You can pry in the center as shown here, or in front of the left and right hinges. 6. Lift up the strip and remove it from the case. 5-8 Upgrading Internal Components
  • Epson ActionNote 910C | User Manual - Page 44
    7. Gently lift the keyboard, holding it by the top edge. Remove it from the case and place it on a flat surface in front of the computer. Do not pull on the keyboard cables. Replacing the Keyboard When you are ready to replace the keyboard, refer to the illustrations in the previous section as you
  • Epson ActionNote 910C | User Manual - Page 45
    The top edge of the keyboard should not overlap the bronze-colored ledge of the case. If you have difficulty aligning the keyboard, try the following approach: hold the top of the keyboard in the center. With the keyboard at a 45° angle, line up the clips on the bottom of the keyboard with the case.
  • Epson ActionNote 910C | User Manual - Page 46
    . CAUTION A memory module is delicate and needs careful handling. If you don't fee/ confident installing it yourself, ask your Authorized EPSON Servicer for assistance. Removing a Memory Module Your computer may have a memory module installed. If you want to replace it with a higher-capacity
  • Epson ActionNote 910C | User Manual - Page 47
    2. Press each of the retaining clips toward the side of the memory module socket and lift up on the edge of the module until it is released. 3. Pull the module out of the socket. You are now ready to install the new memory module. Installing a Memory Module Follow these steps to install the new
  • Epson ActionNote 910C | User Manual - Page 48
    1. Holding the memory module with the notch on the upper right corner, align it with the connector at the edge of the socket. 2. Insert the memory module into the socket at an angle, pressing along the edge until it clicks into place. 3. Press down on the module until it snaps into the retaining
  • Epson ActionNote 910C | User Manual - Page 49
    6 Customizing Your Computer You can customize your ActionNote in a variety of ways covered in this chapter. Customizing Your ActionPoint You can adjust the amount of pressure you need to apply to your touchpad as well as the speed and precision of the cursor movement. Select the ActionPoint
  • Epson ActionNote 910C | User Manual - Page 50
    ActionPoint configuration panels (continued) Panel Features Description notion settings Sensitivity Double-click speed Acceleration Extra precision Adjusts the response of the pointer to the motion of the pointing device Adjusts how quickly you must double-click Increases the cursor speed in
  • Epson ActionNote 910C | User Manual - Page 51
    To select a setting click the button for that setting, then adjust the controls. When you've made changes, click OK to exit. Your settings take effect immediately. NOTE If you install another pointing device and then want to return to the ActionPoint, you need to reinstall the ActionPoint drivers.
  • Epson ActionNote 910C | User Manual - Page 52
    Starting Setup To start Setup, turn on your computer. (If your computer is already on, save any files you've been working on, then restart your computer using Ctrl Alt Del.) During power-on diagnostics you see the following prompt: Press F8 to run SETUP As soon as you see this message, press F8. If
  • Epson ActionNote 910C | User Manual - Page 53
    Help information is available for each option. Highlight the option and press F1 to get Help. Setup lets you change or verify the settings listed in the following tables. Setup page 1 options Setting Options Description system Time hh:mm:ss (24 hour format) Sets the time used by the system
  • Epson ActionNote 910C | User Manual - Page 54
    The table below lists the power management options. Additional information follows. Power management options Setting Options Power Enabled Management Disabled System Idle system Standby system Suspend Hard Disk Timeout Screen Timeout Low Battery Instant On Serial Timeout Disabled Enabled*
  • Epson ActionNote 910C | User Manual - Page 55
    Lets you disable the built-in touchpad, in case you connect a serial mouse Block IDE Enabled Disabled Enables support for block mode transfers, if your hard disk drive supports it Serial Port 2 IR* Lets you define the operation of Replicator Serial Port 2 * Default setting ** Autodetects ECP
  • Epson ActionNote 910C | User Manual - Page 56
    When you are ready to exit Setup, press Esc. You see the exit menu. Press one of the following keys: Setup, exit command keys Key Description Esc Returns you to the main Setup or Power Management Setup screen F4 Saves your new settings and restarts the computer F5 Loads the default
  • Epson ActionNote 910C | User Manual - Page 57
    You may want to experiment to find the settings that work best for you. You can access the Power Management screen (without running Setup) by pressing Fn F8, so you can adjust your settings at any time. You should, however, exercise caution when changingthe Power Management and LOW Battery options.
  • Epson ActionNote 910C | User Manual - Page 58
    Instant On works through the same process as Save to HDD, except that your data is saved to disk when you press the Suspend/Resume button. Before you can use either of these features, you have to configure your hard disk drive. The drive is already partitioned to set aside a 26MB area for the saved
  • Epson ActionNote 910C | User Manual - Page 59
    your computer. If you set a Setup password, the computer prompts you to enter it each time you press F8 to run Setup. Follow the instructions in the next sections to set, delete, or change your password See "Entering a Password" in Chapter 3 for information on using a password. Customizing Your
  • Epson ActionNote 910C | User Manual - Page 60
    Setting a Password Follow these steps to set a password 1. Highlight the Password option. 2. Press Enter. 3. Type a password up to seven characters long. As you type, you see only symbols displayed on the screen. Note whether Num Lock and Caps Lock are on when you type your password. 4. Press Enter.
  • Epson ActionNote 910C | User Manual - Page 61
    Deleting or Changing a Password If you want to delete or change a password, follow these steps: 1. Highlight the Password option. 2. Press Enter. 3. Type your password. You see only squares on the screen. 4. Press Enter. 5. If you are deleting your password, press the I key. The Password option
  • Epson ActionNote 910C | User Manual - Page 62
    Using Video Drivers and Utilities Your system includes high-resolution video display drivers for Windows® installed on your hard disk drive. If you are using Windows 3.1, you can use these drivers to display in resolutions up to 1024 x 768 in 256 colors on an external monitor. Windows 95 provides
  • Epson ActionNote 910C | User Manual - Page 63
    To check on the availability of drivers for nonWindows applications, call the EPSON Connection or access one of the EPSON electronic support services, as described under "Where to Get Help" in Chapter 7. Using Your Audio Card The 16-bit stereo audio card in your ActionNote is Business Audio®
  • Epson ActionNote 910C | User Manual - Page 64
    Recording Control regulates the recording level and stereo balance of multiple input sources. The Mixer combines signals from several audio sources during playback, controlling the volume and balance of each source. The Extended Recorder records, compresses, stores, and plays sounds directly to (
  • Epson ActionNote 910C | User Manual - Page 65
    Using Your Infrared Port The IrDA-compliant infrared port provides "point and beam" wireless serial communications capability for mobile computer users, and replaces network, printer, and other cable connections between IrDAcompliant devices. The IrDA infrared data link standard gives ActionNote
  • Epson ActionNote 910C | User Manual - Page 66
    IrDA device indicates when the units are communicating. See the Puma TranXit online help for more information. 6-18 Customizing Your Computer
  • Epson ActionNote 910C | User Manual - Page 67
    7 Troubleshooting You probably won't have any problems as you set up and use your ActionNote. If anything out of the ordinary happens, however, see this chapter for help. Where to Get Help If you purchased your computer in the United States or Canada, EPSON provides customer support and service
  • Epson ActionNote 910C | User Manual - Page 68
    printed manuals, accessories marketing location nearest you for customer support and service. If you need help with that program for technical support information. Electronic Support Services If you have is through the online services below. NOTE To access electronic support services, you must have a
  • Epson ActionNote 910C | User Manual - Page 69
    bulletin board service (BBS) 24 services and forums. The brochure that comes with your ActionNote describes all the CompuServe services and how to access them. To access the Epson America Forum in WinCIM, simply click on the green traffic light icon and type EPSON at the menu prompt. Troubleshooting
  • Epson ActionNote 910C | User Manual - Page 70
    and version numbers of software you're using Any error message displayed. Once you gather this information, write it down at the back of this manual to keep it handy whenever you need it. 7-4 Troubleshooting
  • Epson ActionNote 910C | User Manual - Page 71
    the computer locks up. If this happens, contact your Authorized EPSON Servicer or the EPSON Connection. Troubleshooting Your ActionNote If you have trouble with your ActionNote, look through the headings in this chapter to see if the problem ls covered. Then follow the suggestions to see if you can
  • Epson ActionNote 910C | User Manual - Page 72
    , remove it and reinstall it. If you are using an AC power adapter, disconnect it and then reconnect it. Then turn the power on again. 7-6 Troubleshooting
  • Epson ActionNote 910C | User Manual - Page 73
    You have trouble running the computer from a battery. (Be sure to read Chapter 2 for information on powering your system.) The battery power may be low. If you is losing its charge faster, it may be reaching the end of its life. You may need to replace it with a new battery. Troubleshooting 7-7
  • Epson ActionNote 910C | User Manual - Page 74
    in Setup and the settings in the video display control panel utility are correct for your system. See "Using Video Drivers and Utilities" in Chapter 6. 7-8 Troubleshooting
  • Epson ActionNote 910C | User Manual - Page 75
    , the computer is probably locked up. You may be able to resume activity by cancelling the current operation. Press Ctrl Alt Del. Then follow any instructions on the screen. Troubleshooting 7-9
  • Epson ActionNote 910C | User Manual - Page 76
    -protect switch is set and you are trying to save a file to the diskette, either use a different diskette, or move the write-protect switch. 7-10 Troubleshooting
  • Epson ActionNote 910C | User Manual - Page 77
    determine whether the problem is with the diskette or the drive. See your operating system documentation or online help for instructions. The Diskette If the drive is making loud or unusual noises, contact your Authorized EPSON Servicer or the EPSON Connection. You Can't Access Files on the Hard Disk
  • Epson ActionNote 910C | User Manual - Page 78
    Isn't Working The PC card slots on your computer support PCMCIA version 2.1 or earlier and accept up to , call the EPSON Connection or your Authorized EPSON Servicer for the latest information about tested cards. Like with your card or driver for instructions. Press the release button to remove the
  • Epson ActionNote 910C | User Manual - Page 79
    correctly. See "Using PC Cards" in Appendix B of the online manual for instructions. Your computer is set up to work with most PC cards, at the prompt. See the EPSON PCMCIA Card Software User's Guide for information about configuring PC cards in DOS and Windows 3.11 using the Troubleshooting 7-13
  • Epson ActionNote 910C | User Manual - Page 80
    solutions solve your problem, contact the card manufacturer or call your Authorized EPSON Servicer or the EPSON Connection for assistance. The ActionPoint Isn't Working Correctly Make sure the touchpad has not been disabled in Setup. See "Changing the Settings" in Chapter 6 for instructions. If you
  • Epson ActionNote 910C | User Manual - Page 81
    dry your hands. If you still have trouble with the ActionPoint, contact your Authorized EPSON Servicer or the EPSON Connection. An External Monitor is set for the correct input and can support the video mode you have selected. See your monitor manual for more information. You may have switched your
  • Epson ActionNote 910C | User Manual - Page 82
    Authorized EPSON Servicer or instructions. Make sure you connected the device to the external keyboard/mouse port or serial port before you turned on the computer, as described in "Using an External Keyboard, Mouse, or Other Pointing Device" in Appendix B of the online manual. 7-16 Troubleshooting
  • Epson ActionNote 910C | User Manual - Page 83
    more information. If you still have trouble with an external device, check the manual that came with it or contact printer or if you have problems feeding paper, check the printer manual for the correct DIP switch instructions under "Installing a Memory Module" in Chapter 5. Troubleshooting 7-17
  • Epson ActionNote 910C | User Manual - Page 84
    Ctrl Alt Del and follow the instructions on the screen. If none of these solutions solves your software problem, contact the software manufacturer for technical support. Your Infrared Port Isn't Communicating Make be a clear line of sight between the two communicating ports. 7-18 Troubleshooting
  • Epson ActionNote 910C | User Manual - Page 85
    port's COM assignment is correct. The default setting is COM2. Check that the Serial Port 2 options are set to IR and to the correct address. Troubleshooting 7-19
  • Epson ActionNote 910C | User Manual - Page 86
    BIOS is shadowed in DRAM for faster access. Video RAM 1MB DRAM supports resolutions up to 640 by 480 in 256 colors on LCD and up in 64K colors on external monitor Cache 16KB internal, write-back unified data/instruction cache; 256KB external cache; both can be enabled /disabled in Setup. Clock
  • Epson ActionNote 910C | User Manual - Page 87
    Technology 65545 or 65548 video controller; 1MB DRAM; 32-bit VL local bus; supports 640 by 480 in 256 colors on LCD; 800 by 600 In 64K colors or software Super I/O controller for one Internal 3.5-inch diskette drive; supports 720KB and 1.44MB formats Super I/O controller has interface for one
  • Epson ActionNote 910C | User Manual - Page 88
    Interfaces External video Parallel Serial External keyboard/mouse Infrared Speaker Auto-sensing, 15-pin, D-sub, female connector for analog monitor; supports simultaneous display with LCD using Fn F10 hot key sequence or software command Centronics® compatible; 25-pin, D-sub, female connector;
  • Epson ActionNote 910C | User Manual - Page 89
    Audio input and output Port replicator Security Connectors for stereo line-in, stereo line-out and for monaural microphone; IRQ9 (default), 5, 7, or 10; address of 220 (default1 230, 240, or 250 Connector for ActionPortT M Replicator Connector for security cable Keyboard 85 keys; 101-key keyboard
  • Epson ActionNote 910C | User Manual - Page 90
    10.4 inches Setup Program Stored in ROM; accessible by pressing F8 at system startup; includes power management utilities Software See the Software Support icon in the About Your ActionNote folder or group for the latest information about the software Included with your system and installed on
  • Epson ActionNote 910C | User Manual - Page 91
    Power Sources Sources include internal removable battery, lightweight AC power adapter, or optional international AC power adapter, and automobile adapter Battery Rechargeable 12 Volt NiMH battery, current regulation by thermistor AC Power Adapters Specification AC connection DC cable Input
  • Epson ActionNote 910C | User Manual - Page 92
    CAUTION Use only the adapters and replacement batteries designed for use with the ActionNote 900 series. Environmental Requirements Condition Temperature Humidity (non-condensing) Altitude Acoustical noise Operating 42° to 95° F (5° to 35° C) 30% to 90% Non-operating -4° to 140° F (-20° to 60°
  • Epson ActionNote 910C | User Manual - Page 93
    Index A AC adapter automobile, B-10 connecting 1-3 dimension& A-6 input ranges, 1-3 international 1-3, 2-2, B-8 model numbers, 2-2 precautions, 4-1 specifications A-6 using 1-2, 2-1 ActionPort replicator, using B-3 Adapter, see AC adapter AUD sound format, 6-15 Audio card recorder, 6-15 recording
  • Epson ActionNote 910C | User Manual - Page 94
    requirements A-7 identifying, 7-4 moving, 4-3 opening, 1-2 precautions, 4-1, 4-3 problems, 7-6-7-18 product code, 7-4 self test, 1-4 serial number, 7-4 specifications, A-1-A-7 storage, 4-3 traveling, 4-3 troubleshooting, 7-1-7-18 turning off, 4-1 Configuration, touchpad, 6-1-6-3 Contrast
  • Epson ActionNote 910C | User Manual - Page 95
    , A-7 EPSON (800) 922-8911 services, 7-1 Accessories, 7-2 bulletin board 7-2 Customer Care Centers, 7-1 electronic support services, 7-2 parts, 7-2 EPSON Connection, 1-1 Ergonomics, 3-4 Error messages, 7-5 External devices connecting B-6-B-8 problems, 7-15-7-16 External keyboard, B-7 External
  • Epson ActionNote 910C | User Manual - Page 96
    , 5-10 G Green light flashing, 2-6 H Hard disk drive controller, A-2 dimensions 5-1 Indicator light, 1-5 partition, 6-10 precautions, 4-2 problems, 7-11 removing, 5-2 replacing, 5-4 specifications A-5 timeout 2-5 upgrading 5-1-5-6 I Idle mode, 2-5 Indicator lights, 1-4-1-5 Infrared (IR) Interface
  • Epson ActionNote 910C | User Manual - Page 97
    cleaning 4-4 drivers and utilities, 6-14 precautions 4-1 resolution, 6-14 specifications A-5 Low Battery option, 6-9 M Mass storage, A-5 Memory capacity, 5-11 module, 5-11 problems, 7-17 specifications A-1 upgrading 5-11-5-13 Moisture, touchpad sensitivity, 4-4 Monitor, see Video Mouse connecting
  • Epson ActionNote 910C | User Manual - Page 98
    , 1-2 P Parallel interface, A-3 Parallel port, enabling 6-7 Parallel printer, connecting, B-6 Password changing, 6-13 deleting 6-13 entering 3-1 incorrect 3-2 losing 6-11 problems, 7-10 setting 6-11-6-12 setup, 6-11 system 6-11 types, 3-1, 6-11 using 3-1-3-2 PC card controller, A-2 indicator light
  • Epson ActionNote 910C | User Manual - Page 99
    power modes, 2-5 Save to Disk 2-7 Precautions diskette drive, 4-4 hard disk, 4-2 touchpad, 4-4 when traveling 4-3 Printer, enabling port, 6-7 Printer problems, 7-17 Problems computer, 7-6-7-10 diskette drive, 7-10 external monitor, 7-15 hard disk, 7-11 keys sticking, 5-10 memory, 7-17 password, 7-10
  • Epson ActionNote 910C | User Manual - Page 100
    /Resume function, 26-2-7, 6-10 Switches, contrast and brightness, 1-6 T Temperature ranges, 4-3 Touchpad cleaning 4-4 clicking 1-7 compatibility, 1-7 configuring 6-1-6-3 mouse equivalents 1-7 problems, 7-14 selecting an item, 1-7 specifications A-4 using 1-7 Troubleshooting see Problems 8 Index
  • Epson ActionNote 910C | User Manual - Page 101
    Turning computer on and off, 1-4 Typing, avoiding strain, 3-4 U Upgrading, hard disk drive, 5-1-5-6 V Video, A-5 controller, A-2 drivers and utilities, 6-14 RAM, A-1 resolution, 6-14 Volume control, A-4 W WAV sound format, 6-15 Wrist rest, 3-4 Index 9
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101