Epson Artisan 1430 Start Here

Epson Artisan 1430 Manual

Epson Artisan 1430 manual content summary:

  • Epson Artisan 1430 | Start Here - Page 1
    Artisan® 1430 Start Here Read these instructions before using your product. 1 Unpack 3 Install ink cartridges 1 Open the printer cover, then open the ink cartridge cover. 2 Unpack the ink cartridges. Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
  • Epson Artisan 1430 | Start Here - Page 2
    and photo papers in the sheet feeder. For instructions on loading envelopes or a CD or DVD, see the online User's Guide. 1 Open the paper support and pull up the extensions. 5 Install software Note: If your computer does not have a CD/DVD drive, you can download the software from the Epson website
  • Epson Artisan 1430 | Start Here - Page 3
    genuine Epson ink cartridges. • Make sure the paper type selected in the printer software matches the paper you loaded. See the online User's Guide for more information. • If you notice light or dark bands across your printouts or they are too faint, run a nozzle check to see if the print head needs
  • Epson Artisan 1430 | Start Here - Page 4
    the numbers below to find your cartridges. It's as easy as remembering your number! Artisan 1430 ink cartridges Color Black Cyan Magenta Yellow Light Magenta Light Cyan High-capacity 79 79 79 79 79 79 Epson Connect Get instant, wireless printing of photos and attachments right from smartphones
  • 1
  • 2
  • 3
  • 4

Start Here
Read these instructions before using your product.
1
Unpack
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
1
Remove all protective materials.
2
Open the printer cover and remove any tape inside.
2
Turn on
1
Connect the power cord to the back of the printer and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Press the
power button
.
3
Install ink cartridges
1
Open the printer cover, then open the ink cartridge cover.
2
Unpack the ink cartridges.
3
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges
may leak.
4
Insert the cartridges in the holder for each color. Press
each cartridge down until it clicks.
5
Close the ink cartridge cover, then close the
printer cover.
6
Press the
ink button to begin priming the ink. This
takes about 3 minutes. Do not turn off the printer, load
paper, or open any covers until the process is complete.
Note:
Your printer ships with full cartridges and part of the
ink from the first cartridges is used for priming the printer.
Replacement cartridges will print more pages.
Caution:
Don’t turn off the printer while it is priming or you’ll
waste ink.
*412173500*
*412173500*
Artisan
®
1430