Epson Artisan 810 Network Installation Guide
Epson Artisan 810 - All-in-One Printer Manual
 |
View all Epson Artisan 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson Artisan 810 manual content summary:
- Epson Artisan 810 | Network Installation Guide - Page 1
Network Installation Guide Artisan® 810 Series - Epson Artisan 810 | Network Installation Guide - Page 2
you installed ink cartridges and loaded paper as described on the Start Here sheet. Then follow the instructions in this guide to set up the printer for use on a network. Tip: For a video tutorial and other information about setting up a wireless network, go to: epson.com/support/wireless. Do one of - Epson Artisan 810 | Network Installation Guide - Page 3
Choose Your Connection Type Wireless To connect the printer wirelessly, see page 4. Note: If you want to print wirelessly but do not have an access point or router, see "Create an Ad-Hoc Wireless Connection" on page 15. Wired To connect the printer using an Ethernet cable, see page 21. Choose Your - Epson Artisan 810 | Network Installation Guide - Page 4
printer supports the following wireless security modes: WEP, WPA, and WPA2. If you don't know your wireless Wirelessly Using the Setup Wizard Follow the steps below to connect to your wireless network. 1. Press the Home button, if necessary, and select Setup on the printer's control panel. 4 Wireless - Epson Artisan 810 | Network Installation Guide - Page 5
router or access point is turned on and working correctly. Press the y Back button to return to the previous screen, select Wireless Setup Wizard, then repeat step 4. ■ If you still can't find the network name in the list, your router or access point is not broadcasting its network - Epson Artisan 810 | Network Installation Guide - Page 6
5. Do one of the following: ■ If your wireless network doesn't have security enabled, continue with step 8. ■ If your wireless network has security enabled, continue with step 6. 6. Use the arrow buttons on the printer's control panel to enter your WEP key or WPA passphrase. Important: WPA - Epson Artisan 810 | Network Installation Guide - Page 7
screen like this one, verify that Wireless connection established 12. Continue with "Install Software" on page 22. Note: If the printer doesn't connect to your wireless network after 90 seconds, the WEP key or WPA passphrase may have been entered incorrectly. See "Connect Wirelessly Using the Setup - Epson Artisan 810 | Network Installation Guide - Page 8
WPA, or WPA2), and the key or passphrase. 1. Press the Home button, if necessary, and select Setup on the printer's control panel. 2. Press l or r and select Network Settings. 3. Select Wireless LAN Setup, select Advanced Setup, then select Manual Wireless LAN Setup. 8 Wireless Network Installation - Epson Artisan 810 | Network Installation Guide - Page 9
4. When you see this screen, press OK. 5. Select Infrastructure Mode. 6. Select Enter SSID. Wireless Network Installation 9 - Epson Artisan 810 | Network Installation Guide - Page 10
7. Use the arrow buttons on the printer's control panel to enter your wireless network name (SSID). Important: Network names are case-sensitive. Be sure to enter upper Press l or r to move the cursor. Press - to delete a character. 8. When you're done entering your wireless network name, press OK. 10 - Epson Artisan 810 | Network Installation Guide - Page 11
enabled, select None, then press OK. 10. Do one of the following: ■ If your wireless network uses WPA as the security mode, continue with "Select WPA Security Settings" on page 12. ■ If your wireless network uses WEP as the security mode, continue with "Select WEP Security Settings" on page 13 - Epson Artisan 810 | Network Installation Guide - Page 12
WPA Security Settings 1. Use the arrow buttons on the printer's control panel to enter your WPA passphrase. Important: WPA to delete a character. 2. When you're done entering the WPA passphrase, press OK. 3. Continue with "Confirm Your Network Settings" on page 14. 12 Wireless Network Installation - Epson Artisan 810 | Network Installation Guide - Page 13
key is 10 or 26 characters, it's hexadecimal. 2. Use the arrow buttons on the printer's control panel to enter your WEP key. Important: WEP keys in ASCII format are case- . 3. When you're done entering the WEP key, press OK. 4. Continue with the next section. Wireless Network Installation 13 - Epson Artisan 810 | Network Installation Guide - Page 14
like this one, verify Wireless connection established 5. Continue with "Install Software" on page 22. Note: If the printer doesn't connect to your wireless network after 90 seconds, the SSID, WEP key, or WPA passphrase may have been entered incorrectly. See "Connect Wirelessly Using Advanced Setup - Epson Artisan 810 | Network Installation Guide - Page 15
Ad-Hoc Wireless Connection Use this setup method if you want to print wirelessly but do not have an access point or router. Important: For Windows® users: If your computer is connected to a network with an Ethernet cable, you need to disconnect it before installing software. When setup is complete - Epson Artisan 810 | Network Installation Guide - Page 16
3. Select Wireless LAN Setup, select Advanced Setup, then select Manual Wireless LAN Setup. 4. When you see this screen, press OK. 5. Select Ad Hoc Mode, then select Enter SSID. 16 Wireless Network Installation - Epson Artisan 810 | Network Installation Guide - Page 17
control panel to create a unique network name (SSID) to identify your printer. Important: Network names are case-sensitive. Be sure to enter upper- or a character. 7. Press OK to select the default channel for your Ad Hoc network. 8. Continue with the next section. Wireless Network Installation 17 - Epson Artisan 810 | Network Installation Guide - Page 18
security mode you want to use for the Ad Hoc wireless network. Note: If you don't want to enable security for your Ad Hoc network, select None, then press OK. 2. Do one of the following: ■ If you selected None as the security mode, continue with "Confirm Your Settings and Connect to the Network - Epson Artisan 810 | Network Installation Guide - Page 19
5. Use the arrow buttons on the printer's control panel to enter your WEP key. Important: WEP keys in ASCII format are case- or r to move the cursor. Press - to delete a character. 6. When you're done entering the WEP key, press OK. 7. Continue with the next section. Wireless Network Installation 19 - Epson Artisan 810 | Network Installation Guide - Page 20
Connect to the Network 1. When you see a screen like this one, verify that the settings are correct. If you need to , connect to the wireless network name you created on page 17 (see your computer or wireless adapter's documentation for details). 5. Continue with "Install Software" on page 22. - Epson Artisan 810 | Network Installation Guide - Page 21
need to disable the wireless adapter using the printer's control panel. Press the Setup button on the printer's control panel, select Network Settings > Wireless LAN Setup > Advanced Setup > Disable Wireless LAN. Select Yes, then press OK. 3. Continue with the next section to install software. Wired - Epson Artisan 810 | Network Installation Guide - Page 22
the network. 1. Insert the printer software CD. 2. Windows Vista®: If you see the AutoPlay window, click Run SETUP.EXE. When you see the User Account Control screen, click Continue. Windows® XP: When you see the Software Installation screen, continue with step 3. Mac OS® X: Double-click the icon - Epson Artisan 810 | Network Installation Guide - Page 23
alert message, click Unblock or Allow to let EpsonNet Setup continue. Do not select Ask Me Later, Keep Blocking, or Block. If you don't allow EpsonNet Setup to continue, you will not be able to install your printer. You might need to contact your firewall provider for assistance. Install Software 23 - Epson Artisan 810 | Network Installation Guide - Page 24
8. Wait while EpsonNet Setup configures your printer for the network. 9. Do one of the following: ■ If you see the Installation Complete screen, continue with the instructions for finishing the installation for Windows on page 27 or Macintosh on page 28 . 24 Install Software - Epson Artisan 810 | Network Installation Guide - Page 25
was unable to find my printer on the network" on page 30. ■ If EpsonNet Setup finds more than one printer on your network, select the printer you want to configure, then click Next. When you see the Installation Complete screen, continue with "Finish the Installation" on page 27. Install Software 25 - Epson Artisan 810 | Network Installation Guide - Page 26
that your computer's wireless adapter is set to acquire an IP address automatically (DHCP). Then select Acquire the IP Address Automatically using DHCP (Recommended) and click Next. When you see the Installation Complete screen, continue with "Finish the Installation" on page 27. 26 Install Software - Epson Artisan 810 | Network Installation Guide - Page 27
prompts on the screen to set up your fax header, install bonus software, and finish the installation. 3. When installation is complete, restart your computer. You're ready to scan and print. See your printed documentation and online Epson Information Center for details. Finish the Installation 27 - Epson Artisan 810 | Network Installation Guide - Page 28
Macintosh 1. Click Save to install an application that allows you to access the printer's memory cards. 2. Select where you would like install the application, then click Save. 3. Click Finish. 4. When you see this screen, click Add Printer. 28 Finish the Installation - Epson Artisan 810 | Network Installation Guide - Page 29
. You're ready to scan and print. See your printed documentation and online Epson Information Center for details. Troubleshooting If you have problems setting up or using your product on a network, check these sections for help: ■ "Setup Problems" below ■ "Printing Problems" on page 32 ■ "Scanning - Epson Artisan 810 | Network Installation Guide - Page 30
access restrictions are set, register the printer's MAC address on the router or access point. Print a Network Status Sheet (see page 33) to obtain the MAC address. Then see your router or access point's documentation for instructions. ■ If your wireless router or access point doesn't broadcast its - Epson Artisan 810 | Network Installation Guide - Page 31
Setup begins to search for your printer. Then continue with step 9 on page 24. Software installation failed Make sure that the printer is connected to your network (see page 4 for wireless or page 21 for Ethernet). Then remove and reinsert the CD to reinstall the printer software. Cannot communicate - Epson Artisan 810 | Network Installation Guide - Page 32
Setup > Network > Read/Write. Press OK, then press OK again to update the setting. ■ For Macintosh, follow the instructions on page 28 to install an application that allows you to access the printer's memory card slots over the network. Printing Problems Cannot print over the network ■ For wireless - Epson Artisan 810 | Network Installation Guide - Page 33
work correctly. In this case, print a Network Status Sheet (see below), open EPSON Scan Settings, select Network (if necessary), click Add, click Enter address, and enter the IP address manually. ■ If you are scanning a large document at high resolution, a communication error may occur. If the scan - Epson Artisan 810 | Network Installation Guide - Page 34
Center for a list of open-source software and software license terms applied to this printer. Trademarks Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Artisan is a registered trademark of Epson America, Inc. General Notice: Other - Epson Artisan 810 | Network Installation Guide - Page 35
- Epson Artisan 810 | Network Installation Guide - Page 36
CPD-27516 Printed in XXXXXX
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
Network Installation Guide
Artisan
®
810 Series