Epson BrightLink 595Wi Start Here
Epson BrightLink 595Wi Manual
 |
View all Epson BrightLink 595Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson BrightLink 595Wi manual content summary:
- Epson BrightLink 595Wi | Start Here - Page 1
sure interactive software is installed 2 Calibrate • Pen calibration • Finger touch calibration 3 Use the PC interactive features • Interactive pens • Finger touch 4 Use PC Free Annotation 5 Using the remote control • Choosing the right tool BrightLink Interaction The projector control toolbar - Epson BrightLink 595Wi | Start Here - Page 2
Ver. 3. If you see Easy Interactive Tools Ver. 3, the software is installed. If the software is not installed, do one of the following to install it: • Use the CD that came with the projector, labeled "EPSON Projector Software for Easy Interactive Function" • Download the most up-to-date version - Epson BrightLink 595Wi | Start Here - Page 3
press and follow the steps below to calibrate manually. 3 Select Touch Unit Setup, then press 4 Select Installation Pattern and press the on-screen instructions. . . Follow 5 Select Touch Calibration, then press . 6 When you see the Touch Calibration screen, press to select Yes. A green - Epson BrightLink 595Wi | Start Here - Page 4
after about 20 minutes of inactivity. Tap the pen tip or press the button on the side to turn the pen back on. Ready Finger Touch You can use your finger to perform the same functions as the interactive pen when the Touch Unit is installed. You can use either the pen or your finger, or use both at - Epson BrightLink 595Wi | Start Here - Page 5
connected to the projector, such as a document camera, tablet, or other source. 1 Press one of the source buttons on the remote control to select how-to videos • Find out about cool, free interactive sites Click the BrightLink Training Resources link on your desktop or go to www.epson.com/ - Epson BrightLink 595Wi | Start Here - Page 6
adjustments Calibrate Page through documents Temporarily turn off image and sound Switch between PC Interactive and PC Free Annotation Enter Zoom in and out Stop video action For more information on using the remote control and cool time-saving buttons: • See the online BrightLink User's Guide
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
The BrightLink interactive pens turn any wall or table into
an interactive area, with or without a computer.
•
With a computer, you can use Easy Interactive Tools.
This software lets you use the interactive pen or your
finger as a mouse to annotate, save, and interact with
content from your computer.
•
Without a computer, you can use the toolbar that is
built into the projector (PC Free Annotation). This
lets you annotate images from a document camera,
tablet, DVD player, or other source connected to your
projector.
Students and colleagues can connect their own
laptops and annotate on the fly using the built-in
toolbar, without installing software.
Start Here
Follow the steps on this card to get started with your
BrightLink:
1
Connect your computer and make sure interactive
software is installed
2
Calibrate
• Pen calibration
• Finger touch calibration
3
Use the PC interactive features
• Interactive pens
• Finger touch
4
Use PC Free Annotation
5
Using the remote control
• Choosing the right tool
BrightLink Interaction
The projector control toolbar lets you control the
projector from the screen just as you would using the
remote control.
Command toolbar
Drawing toolbar
595Wi/595Wi+