Epson BrightLink 685Wi Installation Guide - Ultra-Short Throw Wall Mount ELPMB
Epson BrightLink 685Wi Manual
View all Epson BrightLink 685Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson BrightLink 685Wi manual content summary:
- Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 1
Installation Guide Guide d'installation - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 2
About This Installation Guide This guide describes how to mount the ultra-short-throw projectors listed below to a wall using the Epson® ELPMB46 wall mount. The following projectors are covered by this guide: • BrightLink® 475Wi/480i/485Wi/575Wi/575Wi+/585Wi/585Wi+/595Wi/595Wi+/675Wi+/685Wi/685Wi+/ - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 3
at least two qualified service personnel. If you need to loosen any screws during installation, be careful not to drop the wall mount. If the wall mount or projector falls, it could cause personal injury or property damage. Install the wall mount so that it can sufficiently support the weight of the - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 4
is within reach. • The projector must be installed in one of the following locations in order for the Touch Unit to function properly (if applicable): • Mounted on a wall or suspended from the ceiling with images projected from in front of the screen. • Mounted vertically on a table with images - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 5
English 1 Package Contents 7 2 Specifications 8 3 Connecting Devices 11 4 Positioning the Projector 13 Installation worksheet for projecting on a pre-installed wall-mounted board 14 Installation worksheet for projecting on a plain wall 15 Projection distance worksheets 16 Diagonal - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 6
test pattern 41 7 Attaching the Covers 42 Attach the wall plate cover and end cap 42 Attach the cable cover to the projector 43 8 Appendix 44 Installing the Touch Unit and Control Pad 44 Using the Easy Interactive Function 44 Correcting the Image Shape on a Curved Screen 44 Attaching - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 7
plate/projector installation M6 × 20 mm hexagon shoulder bolt with washer/ spring washer 1 For wall mount/wall plate installation M6 × 20 mm cross recessed head shoulder screw 3 with plastic washer • Use the bolts or screws supplied with the wall mount to install it as directed in this guide - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 8
) Refer to the Adjustment from 3-axis adjustment unit installation illustration on position: 3.4 in. (87 mm) page the included M4 × 12 mm bolts (×6) to attach the separate pieces together before mounting the projector. See page 25 for instructions. 5.2 in. (131 mm) 3.9 in. (99 mm) 3.9 in. (99 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 9
3-axis adjustment unit to the front or back, you can adjust the installation position of the projector. When the screen size is less than 75 inches (85 inches for WUXGA images), install it at the position marked with a stamp on the mount arm. When the screen size is 75 inches or more (85 inches - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 10
To see these stamps, you need to remove the two top bolts and slide out the arm extension. Stamp 3.4 in. (87 mm) Stamp 10 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 11
where the wall mount is to be installed. Make sure you Guide for your projector. Epson DC-07) USB cable (for Easy Interactive Function) Dedicated USB cable (supplied with document camera) For Interactive Use When interacting with a computer, you need a USB cable. However, when using the projector - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 12
with the BrightLink Pro 1410Wi/1420Wi/1430Wi/1450Ui/1460Ui and BrightLink 697Ui projectors. It provides a convenient alternative to the remote control for turning on the projector and selecting whiteboard mode. Certain Control Pad models also have additional functions. You must install the control - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 13
guide covers your projector's native resolution and aspect ratio. For other resolutions and aspect ratios, use the Throw Distance Calculator at www.epson.com/support (U.S.), www.epson.ca/support (Canada), or www.epson.com/jm/support (Latin America). You can project onto a pre-installed whiteboard - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 14
surface, you must install the Touch Unit on the whiteboard or screen. See the documentation included with your projector for details on mounting the Touch Unit. Distance Calculator at www.epson.com/support (U.S.), www.epson.ca/support (Canada), or www.epson.com.jm (Latin America) to determine - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 15
with the center of the image area. Follow the instructions on page 25 to install the projector. Installation worksheet for projecting on a plain wall 10 in. Distance Calculator at www.epson.com/support (U.S.), www.epson.ca/support (Canada), or www.epson.com.jm (Latin America) to determine - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 16
center line on the template sheet with the center of the image area. Follow the instructions on page 25 to install the projector. Projection distance worksheets The tables on the following pages provide installation information for all native image sizes. The minimum ceiling height is based on an - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 17
English Diagonal image size and mounting position 2.8 in. (70.5 mm) Wall plate 8.3 in. (210 mm) 4.7 in. (120 mm the diagonal image size is 75 inches or more (85 inches or more for WUXGA images), mount the 3-axis adjustment unit at the position marked with a stamp. When the diagonal image size is - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 18
which installation measurement table to use for your projector. The measurements may differ depending on the location where you place the projector. When projecting in Tele mode, the quality of the projected images may decrease. Projector model BrightLink Pro 1450Ui/1460Ui BrightLink 696Ui - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 19
English Measurements in Inches for WXGA Projectors in Native Resolution Diagonal Min. ceiling image size (S) height* Image width (w) Image height (h) Distance from top of image to Min. projection Sliderscale bottom wall plate - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 20
Measurements in Inches for XGA Projectors in Native Resolution Diagonal Min. ceiling image size (S) height* Image width (w) Image height (h) Distance from top of image to Min. projection Sliderscale bottom wall plate - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 21
English Measurements in Inches for WUXGA Projectors in Native Resolution Diagonal Min. ceiling image size (S) height* Image width (w) Image height (h) Distance from top of image to Min. projection Sliderscale bottom wall plate - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 22
Measurements in Centimeters for WXGA Projectors in Native Resolution Diagonal Min. ceiling image size (S) height* Image width (w) Image height (h) Distance from top of image to Min. projection Sliderscale bottom wall plate - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 23
English Measurements in Centimeters for XGA Projectors in Native Resolution Diagonal Min. ceiling image size (S) height* Image width (w) Image height (h) Distance from top of image to Min. projection Sliderscale bottom wall plate - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 24
Measurements in Centimeters for WUXGA Projectors in Native Resolution Diagonal Min. ceiling image size (S) height* Image width (w) Image height (h) Distance from top of image to Min. projection Sliderscale bottom wall plate - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 25
hang cable over the wall mount. ❏ Install the wall mount so that it can sufficiently support the weight of the projector and wall mount, and resist any horizontal wall mount to fall. ❏ Epson accepts no responsibility for any damage or injury caused by lack of wall strength or inadequate installation. - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 26
the alignment ( ). Then, tighten the M4 × 12 mm hexagon socket head cap bolt. 3. Attach the 3-axis adjustment unit and slide plate to the projector. Attach the 3-axis adjustment unit and slide plate to the projector using the M4 × 12 mm hexagon socket head cap bolts (×4) supplied. Bolt locations 26 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 27
B Install the (vertical) of the projection surface. For the BrightLink 696Ui/697Ui and BrightLink Pro 1450Ui/1460Ui, align the Image Center B line ( template sheet Center line of projection surface If you want to hide the projector power plug under the wall plate cover, make sure the power outlet - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 28
0.2 inch (6 mm) between the screw head and the wall. 4. Determine the position of the wall plate's mounting holes. Use at least four mounting holes. Steps 5 to 9 below provide instructions for attaching the wall plate to a concrete wall. 5. Drill holes of the following diameters and depths. Drill - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 29
the temporary wall plate screw. C Determine the projection distance and pull out the mount arm slider 1. Using the tables on pages 19 to 24, check the number socket head cap bolts (×2), and then pull out the slider on the wall mount. Align the slider with the measure (b+x) that is equal to the slider - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 30
D Route the cables through the wall mount arm Touch Unit connection cable BrightLink 595Wi/695Wi/595Wi+/695Wi+/696Ui/697Ui and BrightLink Pro 1430Wi/1450Ui/1460Ui: Make sure to route the Touch Unit connection cable through the wall mount arm. Route the Touch Unit connection cable so that the end - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 31
Unit connection cable is not wired into the wall with the other cables. ❏ Take care not to trap the cables between the mount arm and wall plate. 5. Secure the mount arm to the wall plate by tightening the supplied M6 × 20 mm cross recessed head shoulder screws (×3) with the #3 cross-head screwdriver - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 32
slide position of the arm 1. Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount ( ), or the hexagonal shaft at the top of the wall mount ( ). Start by aligning the notch on the arm with the alignment mark on the wall plate as shown below. Tightening - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 33
screws with a cross-head screwdriver and remove the cable cover from the projector. Screws (x2) 2. Attach the 3-axis adjustment unit to the wall mount arm. • Decide which position you want to use for installing the 3-axis adjustment unit. Mount it at the stamp ( ) when the image is less than 75 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 34
See your projector's User Guide for detailed connection information. Power cord Computer cable USB cable Touch Unit connection cable (if applicable) Use M4 screws (not included) to secure any additional devices or accessories, such as external tuners, to the mounting point on the wall mount. If - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 35
the illustrations in this section, but the instructions are the same except where noted. A Turn on the projector Remote Control Control Panel B Change the menu - Aspect. Following is a list of available aspect settings: BrightLink 480i and PowerLite 470/480/570/580/680 • Auto: Automatically sets - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 36
current aspect ratio. The installation guide and test pattern are displayed. Use these to monitor the image as you make the E J adjustments in steps to . To display the test pattern on the BrightLink 475Wi/480i/485Wi/575Wi/575Wi+/585Wi/ 585Wi+/595Wi/595Wi+, BrightLink Pro 1410Wi/1420Wi/1430Wi, and - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 37
English D Adjust the focus 1. Slide the air filter cover switch ( ) to open the air filter cover ( ). 2. Use the focus lever to adjust the focus ( ). 3. After you finish making the adjustment, close the air filter cover. E Use the adjustment dial on the left side to adjust the horizontal roll E J - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 38
F Use the adjustment knob on the right side to adjust the horizontal rotation 1. Loosen the screw to unlock the adjustment knob ( ). 2. Turn the adjustment knob to adjust the horizontal rotation ( ). E J 3. After you finish making all of the adjustments in steps to , tighten the screw you loosened - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 39
loosened in . I Adjust the forward/backward slide 1. Loosen the M4 × 12 mm hexagon socket head cap bolts (×2) ( ). 2. Adjust the slider for the wall mount ( ). E J 3. After you finish making all of the adjustments in steps to , tighten the M4 × 12 mm hexagon socket head cap bolts (×2) you loosened - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 40
shoulder bolt ( ). 2. Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount, or the hexagonal shaft at the top of the wall mount ( ). Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it. Tightening the hexagonal shaft raises the wall - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 41
English L Turn off the display of the test pattern Press the [Esc] button on the remote control or control panel to turn off the test pattern. Warning Tighten all screws firmly. Otherwise, the projector or wall mount may fall and cause personal injury or property damage. 41 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 42
and end cap If you need to use a security cable, make sure you attach it before installing the wall plate cover. See page 44 for instructions. 1. Attach the right wall plate cover ( ) first, then attach the left wall plate cover operate the cutter safely. 2. Attach the end cap to the mount arm. 42 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 43
maintenance and repairs. Refer to your projector's User's Guide for instructions on maintenance and repairs. Warning ❏ Never loosen the bolts and nuts after installation. If you find any loose screws, tighten them firmly. Otherwise, the projector or wall mount may fall and cause personal injury or - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 44
to install a driver that enables pen or finger touch interactivity to work. Both software programs are included with the BrightLink projector. For details, see the online User's Guide or visit: U.S.: www.epson.com/support/brightlinkdownloads Canada: www.epson.ca/support/brightlinkdownloads Latin - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 45
remote control, batteries, CDs, interactive pen(s), pen batteries, pen tray, and battery charger in the room with the projector. If your projector came with a productspecific installation guide or an installation leave-behind list, use that list instead of this one. The accessories included with the - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 46
, improper installation, neglect, improper shipping, disasters such as fire, flood, and lightning, improper electrical current, software problems, exposure to chemical smoke, or excessive humidity Any problem resulting from service by other than Epson or an Epson Authorized Servicer Epson is not - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 47
Authorized Reseller nearest you, please visit www.epson.com (U.S.) or www.epson.ca (Canada). To find the Epson Customer Care Center nearest you, please visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada). To contact the Epson ConnectionSM, please call (562) 276-4394 in the U.S. and - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 48
48 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 49
de ce guide d'installation Le présent guide décrit comment installer sur un mur les projecteurs à ultra-courte distance de projection listés ci-dessous à l'aide du support de montage Epson® ELPMB46 inclus. Ce guide fournit les explications pour les projecteurs suivants : • BrightLink® 475Wi/480i - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 50
utilisez des écrous et des boulons de taille inférieure à M10, le support de montage risque de tomber. Epson n'accepte aucune responsabilité pour tout dommage ou toute blessure dus à une solidité du mur insuffisante ou une installation inappropriée. La fixation du projecteur sur un mur à l'aide du - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 51
endroit qui excède la plage de température de fonctionnement du modèle de projecteur. Un tel environnement peut endommager le projecteur. Installez le support de montage dans un endroit à l'abri de la poussière et de l'humidité pour que l'objectif et les éléments optiques internes ne se salissent - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 52
. • Monté verticalement sur une table avec la projection d'images depuis le devant de la table. Si vous utilisez cette méthode d'installation, vous aurez besoin du support pour table interactive en option (ELPMB29). • Lorsque le boîtier de commande est alimenté par des piles (s'il y a lieu), suivez - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 53
en cm pour les projecteurs WUXGA avec une résolution native 72 5 Installation du projecteur 73 Assemblez les pièces 73 Installez la plaque murale 77 Faites passer les câbles dans le bras du support de montage 78 Fixez le bras du support de montage à la plaque murale 78 Réglez la - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 54
89 Supprimez l'affichage de la mire 89 7 Fixation des caches 90 Fixez le cache du support de montage et le capuchon de protection 90 Fixez le cache du câble au projecteur 91 8 Annexe 92 Installation de l'unité tactile et du boîtier de commande 92 Pour la fonction Easy Interactive 92 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 55
te à empreinte cruciforme 3 M6 x 20 mm avec rondelle plastique • Utilisez les vis ou les boulons fournis avec le support de montage pour installer ce dernier, comme décrit dans le présent guide. Ne leur substituez pas un autre type de boulons. • Vous devez aussi utiliser des ancrages M10 x 60 mm - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 56
de protection) Environ 7,2 kg (15,9 lb) Support de montage : 2,9 kg (6,4 lb) - Dispositif 10,4 po) Réglage à partir de la position d'installation du dispositif de réglage à 3 axes : 87 montage du projecteur. Consultez la page 73 pour obtenir les instructions. 131 mm (5,2 po) 99 mm (3,9 po) 99 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 57
vers l'avant/l'arrière Plage de réglage du coulissement du bras 263 mm (10,4 po) Réglage à partir de la position d'installation du dispositif de réglage à 3 axes En déplaçant la position d'installation du dispositif de réglage à 3 axes vers l'avant ou l'arrière, vous pouvez régler la position - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 58
Pour voir le poinçon, vous devez retirer les deux boulons placés dans le haut, puis faire glisser la rallonge du bras. Poinçon 87 mm (3,4 po) Poinçon 58 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 59
les autres pièces à l'emplacement d'installation du support de montage. Préparez aussi tous les obtenir plus de détails, consultez le Guide de l'utilisateur en ligne pour votre projecteur de l'ordinateur) Microphone Ordinateur Caméra de documents (Epson DC-07) Câble USB (pour la fonction Easy - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 60
. Ce guide couvre la résolution native et le rapport hauteur/largeur d'origine de votre projecteur. Pour d'autres résolutions et rapports hauteur/largeur, utilisez le calculateur de distance de projection à l'adresse www.epson.ca/support. Vous pouvez projeter sur un tableau blanc préinstallé ou - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 61
Utilisez les feuilles de travail suivantes pour déterminer l'emplacement approprié de la plaque murale sur le mur. Si vous projetez sur un tableau blanc préinstallé, utilisez la feuille de travail à la page 62. Si vous projetez sur un mur ordinaire, utilisez la feuille de travail de la page 63. WXGA - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 62
au bas de la zone d'image (f) Si vous désirez installer l'unité tactile à l'extérieur du cadre d'un tableau blanc, utilisez le support de l'unité tactile inclus. Si la distance entre le mur de distance de projection à l'adresse www.epson.ca/support pour déterminer les mesures adéquates. 62 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 63
puis alignez la ligne centrale du gabarit avec le centre de la zone d'image. Suivez les directives de la page 73 pour installer le projecteur. Feuille de travail d'installation pour la projection sur un mur ordinaire 254 mm (10 po) - hauteur de la plaque murale avec le cache Distance requise du - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 64
produit, utilisez le calculateur de distance de projection à l'adresse www.epson.ca/ support pour déterminer les mesures adéquates. 3. À l'aide des de projection Les tableaux des pages suivantes fournissent des renseignements d'installation pour toutes les tailles d'image natives. La hauteur du - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 65
Français Taille de l'image diagonale et position de montage 70,5 mm (2,8 po) 210 mm (8,3 po) Plaque murale 120 mm (4,7 po) Hauteur de l'image projetée 100 mm (4,0 po) 28,3 mm (1,1 po) Distance entre le mur et la surface de projection 20 mm (0,8 po) 25 à 100 mm (1,0 à 3,9 po) Pour voir le - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 66
Poinçon sur la plaque Encoche sur le bras du support Tableaux des mesures d'installation Utilisez le tableau suivant afin de déterminer quel tableau BrightLink Pro 1450Ui/1460Ui BrightLink 696Ui/697Ui BrightLink Pro 1410Wi/1420Wi/1430Wi BrightLink 475W/485W/575Wi/585Wi/595Wi/ 685Wi/695Wi BrightLink - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 67
Français Mesures en pouces pour les projecteurs WXGA avec une résolution native Taille diagonale de l'image (s) Haut. du plafond min.* 60 po 78,7 61 po 79,3 62 po 80,0 63 po 80,6 64 po 81,3 65 po 81,9 66 po 82,5 67 po 83,2 68 po 83,8 69 po 84,4 70 po 85,1 71 po 85,7 72 po 86,4 73 po - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 68
Mesures en pouces pour les projecteurs XGA avec une résolution native Taille diagonale de l'image (s) Haut. du plafond min.* 60 po 82,4 61 po 83,1 62 po 83,8 63 po 84,5 64 po 85,2 65 po 85,9 66 po 86,6 67 po 87,3 68 po 88,0 69 po 88,7 70 po 89,4 71 po 90,2 72 po 90,9 73 po 91,5 74 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 69
Français Mesures en pouces pour les projecteurs WUXGA avec une résolution native Taille diagonale de l'image (s) Haut. du plafond min.* 70 po 85,5 71 po 86,2 72 po 86,8 73 po 87,5 74 po 88,1 75 po 88,7 76 po 89,4 77 po 90,0 78 po 90,7 79 po 91,3 80 po 91,9 81 po 92,6 82 po 93,2 83 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 70
Mesures en cm pour les projecteurs WXGA avec une résolution native Taille diagonale de l'image (s) Haut. du plafond min.* 60 po 199,9 61 po 201,5 62 po 203,1 63 po 204,8 64 po 206,4 65 po 208,0 66 po 209,6 67 po 211,3 68 po 212,9 69 po 214,5 70 po 216,2 71 po 217,8 72 po 219,4 73 po - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 71
Français Mesures en cm pour les projecteurs XGA avec une résolution native Taille diagonale de l'image (s) Haut. du plafond min.* 60 po 209,3 61 po 211,1 62 po 212,9 63 po 214,7 64 po 216,5 65 po 218,3 66 po 220,0 67 po 221,8 68 po 223,6 69 po 225,4 70 po 227,2 71 po 229,0 72 po 230 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 72
Mesures en cm pour les projecteurs WUXGA avec une résolution native Taille diagonale de l'image (s) Haut. du plafond min.* 70 po 217,2 71 po 218,9 72 po 220,5 73 po 222,2 74 po 223,8 75 po 225,4 76 po 227,0 77 po 228,7 78 po 230,3 79 po 231,9 80 po 233,5 81 po 235,1 82 po 236,8 83 po - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 73
des écrous et des boulons de taille inférieure à M10, le support de montage risque de tomber. ❏ Epson n'accepte aucune responsabilité pour tout dommage ou toute blessure dus à une solidité du mur insuffisante ou une installation inappropriée. A Assemblez les pièces 1. Assemblez la plaque murale - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 74
2. Alignez le dispositif de réglage à 3 axes avec la marque d'alignement de la plaque coulissante. Marque d'alignement Si le dispositif de réglage à 3 axes n'est pas aligné correctement, desserrez le boulon à tête cylindrique à six pans M4 x 12 mm ( ) et corrigez l'alignement ( ). Puis, resserrez le - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 75
) du centre d'image de la fiche modèle avec la ligne centrale (verticale) de la surface de projection. Pour les modèles BrightLink 696Ui/697Ui et BrightLink Pro 1450Ui/1460Ui, alignez la ligne B (verticale) du centre d'image de la fiche modèle avec la ligne centrale (verticale) de la surface de - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 76
4. Déterminez la position des trous de montage de la plaque murale. Utilisez au moins quatre trous de montage. Les étapes 5 à 9 ci-dessous fournissent les instructions pour fixer la plaque murale à un mur de béton. 5. Percez des trous des diamètres et des profondeurs suivants. Diamètre de perçage - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 77
mesure de la glissière (b). 2. Desserrez les boulons à tête cylindrique à six pans M4 x 12 mm (x2), puis retirez la glissière sur le support de montage. Alignez la glissière avec la mesure (b+x) équivalente à la mesure de la glissière (b) additionnée à l'épaisseur de l'écran de projection (x). Pour - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 78
de montage Câble de connexion de l'unité tactile BrightLink 595Wi/695Wi/595Wi+/695Wi+/696Ui/697Ui et BrightLink Pro 1430Wi/ 1450Ui/1460Ui : Assurez-vous de faire passer le câble de connexion de l'unité tactile dans le bras du support de montage. Faites passer le câble de connexion de l'unité tactile - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 79
ne passe pas dans le mur comme les autres câbles. ❏ Veillez à ne pas coincer les câbles entre le bras du support de montage et la plaque murale. 5. Fixez le bras du support de montage à la plaque murale en serrant les vis à épaulement à tête à empreinte cruciforme M6 x 20 mm (x3) fournies à l'aide - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 80
du bras 1. Ajustez la position du coulissement vertical avec le boulon à six pans M8 situé au bas du support de montage ( ), ou avec l'arbre hexagonal situé dans le haut du support mural ( ). Alignez tout d'abord l'encoche sur le bras de montage avec la marque d'alignement sur la plaque murale - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 81
les images WUXGA). • Serrez les boulons à tête cylindrique à six pans M4 x 12 mm (x4) fournis pour installer le dispositif de réglage à 3 axes. Avertissement Lorsque vous installez ou ajustez le support de montage, n'utilisez pas d'adhésifs afin d'éviter que les vis ne se desserrent et n'utilisez - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 82
lieu) et le cordon d'alimentation au projecteur. Consultez le Guide de l'utilisateur de votre projecteur pour obtenir des informations de , tel qu'un syntoniseur externe, au point de montage du support. Si vous planifiez de faire passer les câbles à l'int Epson (numéro de pièce : ELPCK01). 82 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 83
pourrait différer des illustrations de cette section, mais les instructions sont les mêmes, sauf indication contraire. A Mettez le projecteur Aspect. Voici une liste des réglages de rapport hauteur/largeur disponibles : BrightLink 480i et PowerLite 470/480/570/580/680 • Automatique : Règle - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 84
4:3 sont étirées horizontalement pour tenir à l'écran. BrightLink Pro 1410Wi/1420Wi/1430Wi/1450Ui/1460Ui, BrightLink 475Wi/485Wi/575Wi/ 575Wi+/585Wi/585Wi+/595Wi/595Wi+/675Wi+/685Wi commande. Télécommande Panneau de configuration 2. Sélectionnez Réglage. 3. Sélectionnez Guide d'installation. 84 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 85
ais 4. Sélectionnez le rapport hauteur/largeur actuel. Le guide d'installation et la mire s'affichent. Utilisez-les pour surveiller l'image alors que vous effectuez E J les ajustements des étapes à . Pour afficher la mire avec les modèles BrightLink 475Wi/480i/485Wi/575Wi/575Wi+/ 585Wi/585Wi+/595Wi - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 86
E Utilisez le cadran d'ajustement sur le côté gauche pour régler le roulis horizontal. E J Répétez les étapes à tel que nécessaire. 1. Desserrez le cadran d'ajustement du bas ( ). 2. Tournez le cadran d'ajustement du haut pour régler le roulis horizontal ( ). E J 3. Une fois tous les réglages des é - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 87
Français E J 3. Une fois tous les réglages des étapes à terminés, serrez la vis que vous avez desserrée à l'étape . G Utilisez le cadran d'ajustement dans le haut pour régler l'inclinaison verticale 1. Desserrez le cadran d'ajustement du bas ( ). 2. Tournez le cadran d'ajustement du haut pour ré - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 88
glez le coulissement vers l'avant/l'arrière 1. Desserrez les boulons à tête cylindrique à six pans M4 x 12 mm (x2) ( ). 2. Ajustez le curseur du support de montage ( ). E J 3. Une fois tous les réglages des étapes à terminés, serrez les boulons à tête cylindrique à six pans M4 x 12 mm (×2) que vous - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 89
Appuyez sur le bouton [Esc] de la télécommande ou du panneau de commande pour supprimer la mire. Avertissement Serrez fermement toutes les vis. Sinon, le support de montage ou le projecteur pourrait tomber et provoquer des blessures corporelles ou des dommages matériels. 89 - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 90
7 Fixation des caches A Fixez le cache du support de montage et le capuchon de protection Si vous devez utiliser un câble de sécurité, assurez-vous de le fixer avant d'installer le cache de la plaque murale. Consultez la page 92 pour obtenir les instructions. 1. Fixez d'abord la cache droite de la - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 91
-vous au Guide de l'utilisateur en ligne de votre projecteur pour plus d'informations sur l'entretien et les réparations. Avertissement ❏ Ne desserrez jamais les écrous et les boulons après l'installation. Si vous constatez le moindre jeu, resserrez fermement les vis concernées. Sinon, le support de - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 92
installer un pilote qui active le crayon ou l'interactivité par commande tactile. Les deux programmes sont inclus avec le projecteur BrightLink. Pour obtenir plus de détails, consultez le Guide de l'utilisateur en ligne ou le site Web à l'adresse suivante : www.epson.ca/support/brightlinklogiciels - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 93
un guide d'installation spécifique au produit ou une fiche d'installation, utilisez ce ou cette dernière au lieu de la présente fiche d'installation. vous devez fournir une preuve de la date d'achat d'origine. Ce que fera Epson pour remédier aux problèmes : Si votre produit doit être réparé durant - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 94
Guide de l'utilisateur en ligne pour plus de détails); • Les dommages causés par une interaction avec des produits de marque autre qu'Epson; • Tous les problèmes résultant d'une mauvaise utilisation, d'une utilisation abusive, d'une installation Epson ou un prestataire de service agréé d'Epson. Epson - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 95
vous, veuillez visiter notre site Web à l'adresse www.epson.ca. Pour obtenir les coordonnées du centre de service après-vente Epson le plus près de chez vous, visitez notre site Web à l'adresse www.epson.ca/support. Pour communiquer avec Epson ConnectionMS, veuillez composer le 905 709-3839 (Canada - Epson BrightLink 685Wi | Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 96
© 2017 Epson America, Inc., 1/17 CPD-50676R1
Installation Guide
Guide d’installation