Epson BrightLink Pro 1430Wi Installation Guide - Control Pad and Touch Unit wi
Epson BrightLink Pro 1430Wi Manual
View all Epson BrightLink Pro 1430Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson BrightLink Pro 1430Wi manual content summary:
- Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 1
Control Pad and Touch Unit Installation Guide Guide d'installation de l'unité tactile et du boîtier de commande - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 2
how to install the Control Pad and Touch Unit (BrightLink® Pro 1430Wi) when using the ELPMB28 wall mount with the BrightLink Pro 1420Wi/1430Wi ultra-short-throw projectors. Safety Instructions For your safety, read all the instructions in this guide before using the wall mount. Incorrect handling - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 3
eyesight. Connect the Touch Unit to the BrightLink Pro 1430Wi model only. Do not connect it to any other projectors or devices. Do not use the Touch . (5 cm). • Multiple projectors are being used. • Before installing the Touch Unit, verify that the installation location meets the following conditions - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 4
• When installing on a whiteboard, install the Touch Unit within the frame of the whiteboard. Correct position Incorrect position Make sure there are no obstacles, such as cables, or protruding objects - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 5
1 Package Contents 2 Specifications 3 Connecting Devices 4 Installing the Touch Unit (BrightLink Pro 1430Wi) 1. Turn on the projectorTurn on the projector 2. Display the installation pattern 3. Remove the markers 4. Determine the installation position for the Touch Unit 5. Install the Touch Unit - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 6
Infrared deflector (approx. 11.2 in [28.5 cm]) (×8) Control Pad The following parts are packaged with your projector and are necessary when attaching the Control Pad. When installing the Control Pad on a wall, you will also need four M4 × 20 mm screws. Control Pad AA size batteries (× 2) Rubber - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 7
3.7 in. (95 mm) English 2 Specifications Touch Unit External dimensions and weight The Touch Unit weighs approximately 16 oz (450 g). 8.3 in. (210 mm) 2.0 in. (51 mm) Attached labels The Touch Unit - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 8
mm) 5.9 in. (149 mm) 6.0 in. (153.5 mm) 0,6 in (15.47 mm) 1.1 in (29 mm) 1.2 in (30.9 mm) Cable routing holes When routing cables through a wall, use the position ( ) in the following figure as the cable routing hole. Otherwise, remove the cable cover ( ) and route the cables through the opening - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 9
and other parts at the location where the wall mount is to be installed. Make sure you also have all necessary cables for the Touch Unit and other devices, such as a document camera or microphone, that you will connect to the projector. Your projector's connection panel may differ slightly from the - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 10
the Touch Unit: • Installing the projector (see the ELPMB28 Installation Guide) • Adjusting the projected image (see the ELPMB28 Installation Guide) • Calibrating the interactive pen(s) s Refer to your projector User's Guide or Start Here folder for detailed instructions. ❏ There are magnets - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 11
English 2. Select Touch Unit Setup. 3. Select Installation Pattern. The Installation pattern is displayed on the projected image. C Remove the markers 1. Loosen the screw at the bottom of the dial cover. 11 - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 12
Touch Unit. Use the markers to perform the angle adjustment (p. 14) after installing the Touch Unit. D Determine the installation position for the Touch Unit Mark the following installation positions: • ( ): The center line of the installation pattern; align it with the center line of the Touch Unit - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 13
of the Touch Unit on the screen surface to secure it. Caution When installing the Touch Unit on a magnetic surface, be careful not to trap your fingers or any other part of your body between the magnets and the installation surface. • For non-magnetic screens, secure the Touch Unit with three (3) M4 - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 14
the interactive pen(s) before adjusting the angle. Press the User button on the remote control and select Yes to perform an auto-calibration. Refer to the projector's online User's Guide for detailed instructions on calibrating the pen(s). 1. Select Easy Interactive Function from the Extended - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 15
English 2. Select Touch Unit Setup. 3. Select Power and set to On. The Touch Unit power turns on and the indicator light turns blue. Indicator light Warning Do not look into the projector's projection window or the Touch Unit's laser diffusion ports (located on the back of the Touch Unit); this - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 16
4. Select Angle Adjustment. The Angle Adjustment screen is displayed. 5. Turn the adjustment dials on the Touch Unit counterclockwise until you hear a click. Then, press the button on the remote control. When adjusting the dials, make sure to stop turning when you hear the click. 16 - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 17
English 6. Attach the two markers you removed from the Touch Unit to the marker positions shown on the projected screen ( ) ( ). Blue marker position Green marker position Match the positions so that the crosses ( ) overlap with the points ( ) on the marker positions ( ) ( ). Move the marker - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 18
Do not place anything other than the markers near the projected image during angle adjustment. If other objects are on the projected image, angle adjustment may not be performed correctly. 7. Turn the adjustment dials on the Touch Unit to move the pointers ( ) ( ) so that they move inside of the - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 19
English 8. When the pointers on the left and right become solid colors ( ) ( ), press the button on the remote control. The following screen is displayed: 9. Place the markers at the top marker positions [1]. When angle adjustment is performed correctly, the upper pointers become solid colors ( ) ( - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 20
11. When you have finished checking the marker positions, remove the markers and press the button on the remote control. The following confirmation screen is displayed: 12. Trace the dots with your finger as shown. When angle adjustment is performed correctly, the traced dots disappear. Finger touch - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 21
or button on the remote control, and then repeat step 12 again. If the dots do not disappear even after performing the above procedures, contact Epson. 21 - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 22
by pressing Menu on the remote control. On the Extended menu, select Easy Interactive Function, then Touch Unit Setup. Select Touch Calibration and follow the instructions. H Store the markers and attach labels 1. Store the markers inside the Touch Unit. 2. Attach the labels to the tabs on - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 23
have completed the steps in "Installing the Projector" in the Installation Guide before installing the Control Pad. Follow the steps below to install the Control Pad and connect to the projector. Caution The Control Pad should only be connected to the BrightLink Pro 1420Wi/1430Wi. Do not connect the - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 24
attach the Control Pad with double-side tape or magnets. ❏ Check that the Control Pad is operating correctly before attaching it with the screws. ❏ When installing the Control Pad on a table, attach the supplied rubber feet (x4) to the base of the Control Pad to prevent it from slipping. 24 - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 25
C Install the batteries English Caution Before handling the batteries, read the safety instructions in your projector's online User's Guide. ❏ Use two AA manganese or alkaline (recommended) batteries. Do not use any other type of battery. Rechargable batteries cannot be used. ❏ In order to use - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 26
Required cables Projecting images from a USB flash drive USB cable 1 Saving data to a USB flash drive Supplying power from the projector Remote control cable set (model ELPKC28; part number V12H005C28) Projecting computer images with USB Display or performing mouse functions using the Easy - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 27
X users also need to install a driver that enables pen or finger touch interactivity to work. Both software programs are included with the BrightLink projector. For details, see the online User's Guide or visit: U.S.: epson.com/support/brightlinkdownloads Canada: epson.ca/support/brightlinkdownloads - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 28
28 - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 29
À propos de ce guide d'installation Ce guide décrit comment installer l'unité tactile et le boîtier de commande (BrightLink® Pro 1430Wi) lorsque vous utilisez le support de montage mural ELPMB28 avec les projecteurs à ultra-courte distance de projection BrightLink Pro 1420Wi/1430Wi. Consignes de - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 30
ner des problèmes oculaires. Connectez l'unité tactile au modèle BrightLink Pro 1430Wi seulement. Ne connectez pas l'unité à d'autres projecteurs ou appareils. ou entraîner un mauvais fonctionnement des appareils ou supports. Emplacement pour l'installation • Lorsque le boîtier de commande est alimenté - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 31
et régulière avec moins de 5 mm (0,2 po) d'inégalité (dans toutes les directions) sur la surface de l'écran. 5 mm (0,2 po) • Lors de l'installation sur un tableau blanc, installez l'unité tactile à l'intérieur du cadre du tableau blanc. Position correcte Position incorrecte • Assurez-vous qu'il - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 32
2 Spécifications 3 Connexion des appareils 4 Installation de l'unité tactile pour les projecteurs BrightLink Pro 1430Wi 1. Mettez le projecteur sous tension 2. Affichez le motif d'installation 3. Retirez les marqueurs 4. Déterminez la position d'installation de l'unité tactile 5. Installez l'unit - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 33
Français 1 Contenu de l'emballage Unité tactile Les pièces suivantes sont emballées avec votre projecteur et sont nécessaires lors de l'installation de l'unité tactile. Lorsque vous installez l'unité tactile sur une surface non magnétique, vous aurez aussi besoin de vis M4. Unité tactile et - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 34
2 Spécifications Unité tactile Dimensions externes et poids L'unité tactile pèse environ 450 g (16 oz). 95 mm (3,7 po) 210 mm (8,3 po) 51 mm (2,0 mm) Étiquettes d'avertissement L'unité tactile est un produit laser de classe 1 qui est conforme à la norme JIS C 6802:2011. Des étiquettes d' - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 35
Français Port de diffusion du laser Le faisceau laser est diffusé depuis les ports de diffusion laser à l'arrière de l'unité tactile. Ports de diffusion laser Boîtier de commande Dimensions externes et poids Le boîtier de commande pèse environ 240 g (8,5 oz). 135,9 mm (5,4 po) 11,5 mm (0,4 po) - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 36
Sinon, retirez le cache-câbles ( ) et faites passer les câbles à travers l'ouverture. Faites passer le câble de l'imprimante le long de la rainure à l'arrière du boîtier de commande 36 - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 37
autres pièces à l'emplacement d'installation du support de montage. Assurez-vous aussi d' Pour obtenir plus de détails, consultez le Guide de l'utilisateur en ligne pour votre projecteur. vidéo de l'ordinateur) Microphone Caméra de documents (Epson DC-06) Ordinateur Câble USB (pour la fonction - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 38
que l'apparence de certains menus soit différente des illustrations, mais les instructions d'installation demeurent les mêmes. Mise en garde Ne branchez l'unité tactile qu'au modèle BrightLink Pro 1430Wi. Ne branchez pas l'unité tactile à d'autres projecteurs ou appareils. A Mettez le projecteur - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 39
Français 2. Sélectionnez Config. uni. tactile. 3. Sélectionnez Motif d'installation. Le motif d'installation s'affiche sur l'image projetée. C Retirez les marqueurs 1. Desserrez la vis dans la partie inférieure du couvercle des cadrans. 39 - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 40
pour effectuer l'ajustement de l'angle (p. 42) après avoir installé l'unité tactile. D Déterminez la position d'installation de l'unité tactile Veuillez marquer les positions d'installation suivantes : • ( ) : Ligne centrale du motif d'installation. Alignez-la avec la ligne centrale de l'unit - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 41
é tactile • Pour les écrans magnétiques, placez l'arrière de l'unité tactile sur la surface de l'écran, puis fixez-la. Mise en garde Lors de l'installation de l'unité tactile sur une surface magnétique, veillez à ne pas coincer vos doigts ou toute autre partie de votre corps entre les aimants et - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 42
du ou des crayons interactifs est terminé. Appuyez sur le bouton User de la télécommande et sélectionnez Oui afin d'effectuer un calibrage automatique. Veuillez consulter le Guide de l'utilisateur en ligne pour obtenir des instructions détaillées sur le calibrage des crayons. 1. Sélectionnez Easy - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 43
Français 2. Sélectionnez Config. uni. tactile. 3. Sélectionnez Alimentation et réglez le paramètre à On. L'unité tactile s'allume et le témoin indicateur s'allume en bleu. Témoin indicateur Avertissement Ne regardez pas la fenêtre de projection du projecteur ou les ports de diffusion laser de l' - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 44
4. Sélectionnez Réglage de l'angle. L'écran de réglage de l'angle s'affiche. 5. Tournez les cadrans de réglage de l'unité tactile dans le sens inverse des aiguilles d'une montre jusqu'à ce que vous entendiez un clic. Puis, appuyez sur le bouton de la télécommande. Lorsque vous ajustez les cadrans, - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 45
Français 6. Placez les deux marqueurs que vous avez retirés de l'unité tactile sur les positions des marqueurs ( ) ( ) sur l'écran de projection. Position du marqueur bleu Position du marqueur vert Faites correspondre les positions de sorte que les croix ( ) soient superposées avec les points ( - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 46
Ne placez rien d'autre que les marqueurs à proximité de l'image projetée lors du réglage de l'angle. Si d'autres objets se trouvent sur l'image projetée, le réglage de l'angle pourrait ne pas être effectué correctement. 7. Tournez les cadrans d'ajustement de l'unité tactile pour déplacer les - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 47
Français 8. Lorsque les couleurs des pointeurs à gauche et à droite deviennent unies ( ) ( ), appuyez sur le bouton de la télécommande. L'écran suivant s'affiche : 9. Placez les marqueurs sur les positions de marqueur supérieures [1]. Si le réglage de l'angle a été effectué correctement, les - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 48
11. Lorsque vous avez terminé la vérification des positions des marqueurs, retirez les marqueurs et appuyez sur le bouton de la télécommande. L'écran de confirmation suivant s'affiche : 12. Tracez les points avec votre doigt tel qu'illustré. Si le réglage de l'angle est effectué correctement, les - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 49
de la télécommande et effectuez à nouveau l'étape 12. Si les points ne disparaissent toujours pas après avoir effectué les procédures ci-dessus, communiquez avec Epson. 49 - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 50
Config. uni. tactile. Sélectionnez Calibrage tactile et suivez les instructions. H Stockez les marqueurs et posez les étiquettes 1. Stockez déplace hors position, utilisez la position des étiquettes pour déterminer où réinstaller l'unité tactile. I Posez le couvercle Fixez le couvercle des cadrans. - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 51
instructions d'installation Guide d'installation avant d'installer le boîtier de commande. Suivez les étapes ci-dessous pour installer le boîtier de commande et le connecter au projecteur. Avertissement Le boîtier de commande doit seulement être connecté aux projecteurs BrightLink Pro 1420Wi/ 1430Wi - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 52
A Retirez le cache-câbles B Fixez le boîtier de commande Fixez le boîtier de commande avec des vis M4 x 20 mm (x4) disponibles dans le commerce. Avertissement ❏ Assurez-vous que les vis ne sont pas en angle. ❏ Assurez-vous que le boîtier de commande est solidement fixé. ❏ Ne fixez pas le boîtier de - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 53
commande afin d'éviter qu'il puisse glisser. C Installez les piles Mise en garde Avant de manipuler les piles, lisez les instructions de sécurité dans le Guide de l'utilisateur en ligne de votre projecteur. ❏ Utilisez deux piles au manganèse ou alcalines (recommandé). N'utilisez pas d'autres types - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 54
D Connectez les câbles du projecteur au boîtier de commande Câble USB 1 Câble de la télécommande Câble USB 2 Câble USB 4 Câble USB 3 Clé USB Pour effectuer les fonctions ci-dessous, vous devez brancher les câbles appropriés : Fonction du projecteur Câbles requis Projeter des images depuis - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 55
installer un pilote qui active le crayon ou l'interactivité par commande tactile. Les deux programmes sont inclus avec le projecteur BrightLink. Pour obtenir plus de détails, consultez le Guide de l'utilisateur en ligne ou l'un des sites Web suivants : É.-U. : epson.com/support/brightlinkdownloads - Epson BrightLink Pro 1430Wi | Installation Guide - Control Pad and Touch Unit wi - Page 56
© 2014 Epson America, Inc., 7/14 CPD-41860
Control Pad and Touch Unit
Installation Guide
Guide d’installation de l’unité tactile
et du boîtier de commande