Epson C203011-B PostScript Printing Information
Epson C203011-B - Stylus Color 3000 Inkjet Printer Manual
 |
UPC - 010343816152
View all Epson C203011-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson C203011-B manual content summary:
- Epson C203011-B | PostScript Printing Information - Page 1
Total Pages: EPSON Stylus Pro 9000, 9500, 9600, 7000, 7500, 7600, 10000, 10600, 5000, 5500 and Stylus Color 3000 Printers PostScript Printing Support for Mac OS X Native Mode This bulletin provides instructions for installing and configuring a Mac OS X Client with your existing EPSON hardware or - Epson C203011-B | PostScript Printing Information - Page 2
Other to continue. 4. Navigate to the location of your PPD file. After selecting the PPD file it should reflect the name of the printer under the Printer Model section. Click on the Add button. 5. Repeat the process to add your additional queues. Your Mac OS X Client should now be ready to print. 2 - Epson C203011-B | PostScript Printing Information - Page 3
under Applications - Utilities 2. Click on the Add button and select IP Printing from the sub-menu. 3. Enter the IP Address of the Postscript Server under Printer's Address. Uncheck the Use default queue on server and type in the queue you wish to add. Click on the - Epson C203011-B | PostScript Printing Information - Page 4
the process to add your additional queues. Your Mac OS X Client should now be ready to print. Note: The StylusRIP does not have a separate folder on the CD to select the printer's PPD. In order to select the PPD it must be copied from another client's Printer Description folder as shown below (HDD
-
1 -
2 -
3 -
4
 |
 |
1
EPSON
Product Support Bulletin
Date:
09/25/2002
Originator:
MS
PSB #:
PSB.2002.09.004
Authorization:
Reference:
N/A
Total Pages:
Product(s):
EPSON Stylus Pro 9000, 9500, 9600, 7000, 7500, 7600, 10000, 10600, 5000,
5500 and Stylus Color 3000 P
rinters
Subject:
PostScript Printing Support for Mac OS X Native Mode
This bulletin provides instructions for installing and configuring a Mac OS X Client with your
existing EPSON hardware or software RIP. If your EPSON Professional Wide Format printer was
bundled with one of the RIP packages listed below, or if you had purchased the RIP as an option,
then you can configure a Mac OS X Client with OS Version 10.2 and above for PostScript printing
by simply installing the appropriate RIP PPD.
•
EFI RS 5000 LX Series
– Stylus Pro 5000 printer
•
EFI RS 5100 X2 Series
- Stylus Pro 9000, 7000, 9500 and 7500 printers
•
Fiery Spark Designer – Stylus Pro 5500 printer
•
Fiery Spark Professional 1.0 – Stylus Pro 5500 and Stylus Pro 10000ARC/DYE printers
•
Fiery Spark Professional 2.0 – Stylus Pro 9600UCM/7600UCM printers
•
EPSON StylusRIP -
Stylus Color 3000 and Stylus Pro 5000 printers
Installation Instructions:
Setup your existing RIP Server as per the instructions provided in the User’s Guide that came
with your RIP. To setup a Mac OS X Version 10.2 Client follow the instructions below. There are
two ways you can add a PPD and configure your printer in OS X,
AppleTalk
or
IP Printing
.
AppleTalk Installation:
1.
Open the
Print Center
, which can be found on your hard disk driver under
Applications - Utilities