Epson CX9400Fax Start Here Book (with wireless print server)
Epson CX9400Fax - Stylus Color Inkjet Manual
UPC - 010343865815
View all Epson CX9400Fax manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson CX9400Fax manual content summary:
- Epson CX9400Fax | Start Here Book (with wireless print server) - Page 1
Epson Stylus® CX9475Fax Start Here - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 2
Unpack Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. If anything is missing, contact Epson® as described on page 20. Remove the tape. 2 Unpack - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 3
Turn On 1. Connect the power cable. Caution: Do not connect to your computer yet. 2. Press the P On button. Turn On 3 - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 4
Make Settings 1. Select your language and country. Press u or d to select the desired option: Press OK when done. 2. For the Daylight Time setting, select Summer if your region uses Daylight Saving Time and it's currently in effect. (DST is effective from March through November.) Otherwise, select - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 5
4. Use the numeric keypad to set the date. 5. Press u or d to select the time format, then press r. 6. Use the numeric keypad to set the time. 7. Press OK when done. Make Settings 5 - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 6
Ink Cartridges Note: Don't load paper before installing the ink cartridges. 1. Lift up the scanner. 2. Open the cartridge cover. 3. Shake the ink cartridges, then unpack them. 4. Remove only the yellow tape from each cartridge. Caution: Don't remove any other seals from the cartridges. 6 Install Ink - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 7
5. Insert the cartridges in the holder for each color. 6. Press the cartridges down until they click. 7. Close the ink cartridge cover and press it down until it clicks. 8. Close the scanner. Install Ink Cartridges 7 - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 8
9. Press the OK button to charge ink. Charging takes about 2 minutes. Caution: Don't turn off the CX9475Fax while the On light is flashing or you'll waste ink. Load Paper 1. Open the paper support and pull up its extension. 2. Open the output tray. 3. Slide the edge guide to the left and flip the - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 9
4. Load paper against the right edge guide and behind the tab, with the printable side face up. Note: Don't load the paper sideways; always load it short edge first. 5. Slide the edge guide over. Load Paper 9 - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 10
on the CX9475Fax. To connect a telephone or answering machine, see the Quick Guide for instructions. Note: If you're connecting to a DSL phone line, you must use print server's antenna and to secure the print server to the all-in-one. 1. Attach the antenna to the print server and hand-tighten it. - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 11
. If you're installing the all-in-one in an Ad Hoc environment, see "Configuring the Print Server and Installing Software for Ad Hoc Mode" on page 15. Before you start, make sure your network is set up and working correctly. Then follow the instructions below to install the drivers and configure the - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 12
You need to install the drivers and other software for the all-in-one and print server. Follow the on-screen instructions to connect and power on the print server. Note: ABBY® Fine Reader Sprint is not included with the Epson Stylus CX9475Fax. 1. Insert the CX9475Fax software installation CD. With - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 13
the print server and your network access point or router. 5. Follow the on-screen instructions to complete the installation. 6. When you're done, remove the CD. You're ready to print, copy, scan, and fax. See your Quick Guide or on-screen User's Guide. Install Software and Set Up the Print Server 13 - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 14
Next. 7. Confirm your network settings, then click Next. 8. Follow the on-screen instructions to complete the installation. 9. When you're done, remove the CD. You're ready to print, copy, scan, and fax. See your Quick Guide or on-screen User's Guide. 14 Install Software and Set Up the Print Server - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 15
Configuring the Print Server and Installing Software for Ad Hoc Mode Follow the instructions in this section to set up the CX9475Fax for Ad Hoc mode. 1. Plug the included USB cable into the print server and your all-in-one. 2. Plug one end of the included Ethernet cable into your computer. Then plug - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 16
computer. Then click Next. 18. Follow the on-screen instructions to complete the installation. 19. When you're done, remove the CD. You're ready to print, copy, scan, and fax. See your Quick Guide or on-screen User's Guide. 16 Configuring the Print Server and Installing Software for Ad Hoc Mode - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 17
all-in-one's scanner and card reader, you need to connect to it using MFP Manager. When you're done, disconnect from the all-in-one to allow other network users to access these functions. Follow the steps below to connect and disconnect your all-in-one using the MFP Manager software: 1. Double-click - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 18
trouble installing your all-in-one. The print server can't be found ■ Make sure that the print server is turned on and connected correctly. ■ Make sure the antenna is connected to the print server and that it is upright. ■ Make sure that your computer and print server are connected to the wireless - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 19
of wireless interference. ■ If your wireless access point and print server are located next to each other, you can try connecting them with an ethernet cable. The software installation failed Remove and reinsert the software installation CD. Then follow the steps on page 11. Solving Problems 19 - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 20
common problems. You can download drivers and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a Support Representative Before you call Epson for support, please have the following information ready: ■ Product name (Epson Stylus CX9475Fax all-in-one - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 21
Epson and Epson Stylus are registered trademarks, and Epson Exceed Your Vision is a trademark of Seiko Epson Corporation. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those - Epson CX9400Fax | Start Here Book (with wireless print server) - Page 22
- Epson CX9400Fax | Start Here Book (with wireless print server) - Page 23
- Epson CX9400Fax | Start Here Book (with wireless print server) - Page 24
CPD-25134 Printed in USA
Epson Stylus
CX9475Fax
Start Here
®