Epson EB-PU1008W Users Guide

Epson EB-PU1008W Manual

Get Epson EB-PU1008W PDF manuals and user guides View all Epson EB-PU1008W manuals
Add to My Manuals
Save this manual to your list of manuals

Epson EB-PU1008W manual content summary:

  • Epson EB-PU1008W | Users Guide - Page 1
    EB-PU1006W/EB-PU1007B/EBPU1007W/EB-PU1008B/EB- PU1008W/EB-PU2010B/EB-PU2010W User's Guide
  • Epson EB-PU1008W | Users Guide - Page 2
  • Epson EB-PU1008W | Users Guide - Page 3
    Contents EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EB-PU1008W/EB-PU2010B/EB-PU2010W User's Guide ...11 Introduction to Your Projector ...12 Projector Features...12 Product Box Contents...13 Additional Components ...14 Additional Projector Software and Manuals 15 Optional Equipment and Replacement
  • Epson EB-PU1008W | Users Guide - Page 4
    LAN Module 59 Using a QR Code to Connect a Mobile Device 61 Using Quick Wireless Connection (Windows 63 Selecting Wireless Network Settings Manually 64 Wireless LAN Menu Settings ...67 Selecting Wireless Network Settings in Windows 69 Selecting Wireless Network Settings on Mac 70 Setting Up
  • Epson EB-PU1008W | Users Guide - Page 5
    Registering a Digital Certificate on the Projector 98 Importing a Web Server Certificate Using the Projector Menus 98 Registering Digital Certificates from a USB Device 99 Registering Digital Certificates from a Web Browser 101 Digital Certificate Types...103 Using Basic Projector Features ...
  • Epson EB-PU1008W | Users Guide - Page 6
    Image Aspect Ratio ...146 Changing the Image Aspect Ratio 147 Available Image Aspect Ratios ...148 Color Mode...149 Changing the Color Mode...149 Available Color Modes...150 Adjusting the Brightness...150 Constant Brightness Usage Hours 153 Adjusting Luminance Controls...155 Controlling the Volume
  • Epson EB-PU1008W | Users Guide - Page 7
    Edges ...198 Adjusting the Black Level ...201 Matching Tint and Brightness (Screen Matching 205 Screen Matching Conditions 206 Matching the Screens Manually 206 Scaling an Image...208 Simple Stacking for One Bright Image 210 Simple Stacking Conditions ...211 Setting Up Simple Stacking...211
  • Epson EB-PU1008W | Users Guide - Page 8
    277 Using the Projector Help Displays ...282 Solving Image or Sound Problems 282 Solutions When No Image Appears 283 Solutions When "No Signal" PC Laptop 284 Displaying From a Mac Laptop 285 Solutions When "Not Supported" Message Appears 285 Solutions When Only a Partial Image Appears 285
  • Epson EB-PU1008W | Users Guide - Page 9
    Solutions When Network Alert E-Mails are Not Received 297 Solutions to Problems Using Content Playback 297 Where to Get Help (U.S. and Canada Supported Video Display Formats...310 Notices ...312 Recycling (U.S. and Canada) ...312 Important Safety Information ...312 Important Safety Instructions
  • Epson EB-PU1008W | Users Guide - Page 10
    List of Safety Symbols (corresponding to IEC60950-1 A2 319 FCC Compliance Statement...324 Binding Arbitration and Class Waiver 325 Trademarks ...328 Copyright Notice...328 A Note Concerning Responsible Use of Copyrighted Materials 329 Copyright Attribution ...329 10
  • Epson EB-PU1008W | Users Guide - Page 11
    -PU1007W/EB-PU1008B/EBPU1008W/EB-PU2010B/EB-PU2010W User's Guide Welcome to the EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EB-PU1008W/EBPU2010B/EB-PU2010W User's Guide. For a printable PDF copy of this guide, click here. Note: The EB-PU2010B/EB-PU2010W is shown in most illustrations in this manual
  • Epson EB-PU1008W | Users Guide - Page 12
    more about your projector and this manual. Projector Features Notations Used in the brighter colors and uncompromising image quality • HDR support for dynamic images • Scene adaptive gamma correction • Wired and wireless (optional) network support for projection, monitoring, and control via
  • Epson EB-PU1008W | Users Guide - Page 13
    Edge Blending tool can create one large seamless display when projecting from multiple projectors • Epson's Instant Off and Direct Power On features for quick setup and shut down • Support for Crestron Connected network monitoring systems • Network message broadcast system to project timely messages
  • Epson EB-PU1008W | Users Guide - Page 14
    Make sure your projector box included all of these parts: 1 Projector 2 Cable cover 3 Lens connector cap 4 Remote control 5 Remote control batteries (two AA alkaline) 6 Power cord Parent topic: Projector Features Additional Components Depending on how you plan to use the projector, you may need to
  • Epson EB-PU1008W | Users Guide - Page 15
    can install the projector software programs listed here and view their manuals for instructions on using them. Note: If you still need help after checking this manual and the sources listed here, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help
  • Epson EB-PU1008W | Users Guide - Page 16
    Management (Windows only) Epson iProjection (Windows/Mac) Epson iProjection app Epson Projector Professional Tool (Windows/Mac) Manual Epson Projector Management Operation Guide Epson iProjection Operation Guide (Windows/Mac) Instructions are included with the app (instructions included with the
  • Epson EB-PU1008W | Users Guide - Page 17
    connection. You can download the latest software and documentation from the Epson web site. Go to epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Caribbean) and select your projector. Epson Creative Projection Instructions are included (iOS only) with the app
  • Epson EB-PU1008W | Users Guide - Page 18
    Or you can contact your nearest sales office as described in "Where to Get Help." Note: Availability of accessories varies by country. Epson offers the following optional accessories and replacement parts for your projector: U.S. and Canada: Option or part Air filter (ELPAF46) External air filter
  • Epson EB-PU1008W | Users Guide - Page 19
    V12H004M0F V12H004M0A V12H004M0B V12H004L08 V12HA54010 V12HA55010 V12H467020 V12H996A01 1 EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EB-PU1008W only 2 EB-PU2010B/EB-PU2010W only In addition to the accessories listed above, extended service plans are available. Latin America: Option or part
  • Epson EB-PU1008W | Users Guide - Page 20
    V12H004M0B V12H004L08 1 EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EB-PU1008W only 2 EB-PU2010B/EB-PU2010W only Parent at latin.epson.com/support, search for your product, and select Register. Registering also lets you receive special updates on new accessories, products, and services. Parent
  • Epson EB-PU1008W | Users Guide - Page 21
    solutions to common problems. • epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Caribbean) View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24 hours a day. • If you still need help after checking this manual and any other
  • Epson EB-PU1008W | Users Guide - Page 22
    Projector Parts - Base Projector Parts - Control Panel Projector Parts - Remote Control Parent topic: Introduction to Your Projector Projector Parts - Front/Top 1 Air intake vent 2 Projection lens 3 Remote receivers 22
  • Epson EB-PU1008W | Users Guide - Page 23
    4 Projector status lights 5 Air filter cover/intake vent 6 USB-A port (for wireless LAN module) 7 Wireless LAN module indicator light 8 Cable cover 9 Lens replacement cover 10 Air exhaust vents Warning: Do not look into the lens during projection. This could cause visual impairment. Parent topic:
  • Epson EB-PU1008W | Users Guide - Page 24
    Projector Parts - Interface Ports 1 Computer port 2 Audio Out port 3 RS-232C port 4 Remote port 5 Cable holder 6 SDI Out/In ports (EB-PU2010B/EB-PU2010W only) 7 Service (USB-B) port 8 USB-A port 9 HDMI port 10 DVI-D port 11 HDBaseT port 12 LAN (network) port Parent topic: Projector Part Locations 24
  • Epson EB-PU1008W | Users Guide - Page 25
    Projector Parts - Base 1 Front adjustable feet 2 Safety wire screw holes 3 Rear adjustable feet 4 Security cable attachment point 5 Cable cover screw holes 6 Air filter cover screws 7 Cable holder 8 Optional external camera attachment points 9 Ceiling mount attachment points When you use the
  • Epson EB-PU1008W | Users Guide - Page 26
    Secure the ring using the M6 × 15 mm bolt supplied with the safety wire set, and loop the safety wire through the ceiling mount to secure it as shown. Parent topic: Projector Part Locations Projector Parts - Control Panel 1 On button (turns on the projector) 2 Source Search button (searches for
  • Epson EB-PU1008W | Users Guide - Page 27
    4 Enter button (selects options) 5 Left arrow button and displays the Control Panel Lock screen 6 Down arrow button and displays a test pattern 7 A/V Mute button (turns the video and audio on or off) 8 Lens button (displays the lens shift, zoom, focus, and distortion adjustment screens; hold
  • Epson EB-PU1008W | Users Guide - Page 28
    Projector Parts - Remote Control 1 On button (turns on the projector) 2 Standby button (turns off the projector) 3 Source buttons (select an image source) (BNC button not available) 4 Aspect button (selects the image aspect ratio) 5 Auto button (automatically adjusts computer images) 28
  • Epson EB-PU1008W | Users Guide - Page 29
    6 Freeze button (stops video action) 7 Test Pattern button (displays a test pattern) 8 Lens Shift button (adjusts the image position) 9 Zoom button (changes the image size) 10 Menu button (accesses projector menu system) 11 Arrow buttons (move through on-screen options and move pointer) 12 Enter
  • Epson EB-PU1008W | Users Guide - Page 30
    33 Light button (lights up the remote control buttons temporarily) 34 Indicator light (lights up when the remote control is in use) 35 Remote control signal emitter (emits remote control signals) Parent topic: Projector Part Locations 30
  • Epson EB-PU1008W | Users Guide - Page 31
    Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Attaching and Removing a Lens Attaching and Removing the Cable Cover Installing
  • Epson EB-PU1008W | Users Guide - Page 32
    Rear Front ceiling Rear ceiling 32
  • Epson EB-PU1008W | Users Guide - Page 33
    Caution: Be sure to leave the following amount of space around the projector to avoid blocking the air exhaust and intake vents. 1 11.8 inches (30 cm) 2 7.9 inches (20 cm) 3 3.9 inches (10 cm) If you are installing multiple projectors next to each other, be sure to leave at least 28 inches (70 cm)
  • Epson EB-PU1008W | Users Guide - Page 34
    1 28 inches (70 cm) You can mount the projector to the ceiling at any horizontal or vertical angle. If you project from the ceiling or from the rear, select the correct Projection setting and, if necessary, adjust the OSD Rotation setting. Parent topic: Projector Placement Related references
  • Epson EB-PU1008W | Users Guide - Page 35
    ). 1 Screen 2 Screen size 3 Projection distance 4 Distance from the center of the lens to the bottom of the screen EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EB-PU1008W (with standard lens ELPLM08) 16:10 Aspect Ratio Image or Screen Screen size (2) Projection distance (3) Wide to Tele
  • Epson EB-PU1008W | Users Guide - Page 36
    inches (1576 to 2520 cm) 800 inches 994 to 1589 inches (2524 to 4035 cm) 1000 inches 1243 to 1986 inches (3157 to 5044 cm) EB-PU2010B/EB-PU2010W (with standard lens ELPLM15) 36 Vertical lens shift (4) Top to bottom -37.4 to 5.5 inches (-95 to 14 cm) -50.0 to 7.5 inches (-127 to
  • Epson EB-PU1008W | Users Guide - Page 37
    16:10 Aspect Ratio Image or Screen Screen size (2) Projection distance (3) Wide to Tele (Minimum to Maximum) 60 inches 78 to 128 inches (199 to 326 cm) 80 inches 106 to 172 inches (268 to 438 cm) 100 inches 133 to 216 inches (337 to 549 cm) 120 inches 160 to 260 inches (406 to 661 cm)
  • Epson EB-PU1008W | Users Guide - Page 38
    External Speakers Parent topic: Setting Up the Projector Related references Projector Setup Settings - Extended Menu Connecting to Video Sources Follow the instructions in these sections to connect video devices to the projector. Connecting to an HDMI Video Source Connecting to an SDI Video Source
  • Epson EB-PU1008W | Users Guide - Page 39
    an SDI Video Source If your video source has an SDI port, you can connect it to the projector using an optional BNC video cable (EB-PU2010B/EB-PU2010W only). 1. Connect the BNC video cable to your video source's SDI output port. 2. Connect the other end to the projector's SDI port. Parent
  • Epson EB-PU1008W | Users Guide - Page 40
    3. Tighten the screws on the VGA connector. Parent topic: Connecting to Video Sources Connecting to Computer Sources Follow the instructions in these sections to connect a computer to the projector. Connecting to a Computer for VGA Video Connecting to a Computer for HDMI Video and Audio Connecting
  • Epson EB-PU1008W | Users Guide - Page 41
    that allows you to connect to the projector's HDMI port. Contact Apple for compatible adapter options. Older Mac computers (2009 and earlier) may not support audio through the HDMI port. 1. Connect the HDMI cable to your computer's HDMI output port. 2. Connect the other end to the projector's HDMI
  • Epson EB-PU1008W | Users Guide - Page 42
    the transmitter. 3. Connect the other end to the projector's HDBaseT port. Note: See the documentation that came with the HDBaseT transmitter for instructions on connecting it to your video device or computer. 4. Turn on the projector and HDBaseT transmitter. Note: To enable communication from the
  • Epson EB-PU1008W | Users Guide - Page 43
    the cable to your projector's Audio Out port. Parent topic: Projector Connections Related references Projector Setup Settings - Extended Menu Attaching and Removing a Lens Follow the instructions in these sections to attach or remove a compatible lens. 43
  • Epson EB-PU1008W | Users Guide - Page 44
    Warning: Make sure you turn off the projector and unplug the power cord before attaching or removing a lens. Otherwise, you may receive an electric shock. Attaching a Lens Removing a Lens Parent topic: Setting Up the Projector Attaching a Lens You can attach a compatible lens to the projector.
  • Epson EB-PU1008W | Users Guide - Page 45
    2. Remove the stopper, if necessary. 3. Pinch the lock lever and move it to the Release position. 45
  • Epson EB-PU1008W | Users Guide - Page 46
    Note: When using one of the following lenses, attach the lens connector cap: ELPLS04, ELPLU02, ELPLR04, ELPLW04, ELPLM06, ELPLM07, or ELPLL07. 4. Insert the lens straight into the projector's lens socket with the white dot facing up. 46
  • Epson EB-PU1008W | Users Guide - Page 47
    5. Hold the lens firmly after it is fully inserted, then pinch the lock lever and move it to the Lock position. Note: Make sure the lens is securely attached. 6. Reattach the stopper. 47
  • Epson EB-PU1008W | Users Guide - Page 48
    7. Replace the lens cover. 8. If prompted, select Yes to calibrate the lens. Note: If no message appears after attaching the lens, perform lens calibration by holding down the Default button on the remote control for approximately 3 seconds, or you can go to Extended > Operation > Lens Calibration
  • Epson EB-PU1008W | Users Guide - Page 49
    Parent topic: Attaching and Removing a Lens Related references Optional Equipment and Replacement Parts Related tasks Setting the Lens Type Removing a Lens You can remove a lens to replace it with a different lens. Warning: Wait at least 30 minutes to remove or replace the lens after turning off the
  • Epson EB-PU1008W | Users Guide - Page 50
    4. Remove the stopper, if necessary. 5. Hold the lens firmly as you pinch the lock lever and move it to the Release position. Then, gently pull the lens straight out of the projector. Parent topic: Attaching and Removing a Lens 50
  • Epson EB-PU1008W | Users Guide - Page 51
    provided). Caution: Do not bundle the power cord to the other cables. Otherwise, a fire may occur. 2. Place the cable cover on the projector as shown, guiding the cables through the notch on the base of the cable cover. 51
  • Epson EB-PU1008W | Users Guide - Page 52
    batteries that came with the projector. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. 52
  • Epson EB-PU1008W | Users Guide - Page 53
    1. Remove the battery cover. 2. Insert the batteries with the + and - ends facing as shown. Warning: Make sure the batteries are inserted in the correct positions. If the batteries are not inserted correctly, they could explode or leak, causing a fire, injury, or damage to the product. 53
  • Epson EB-PU1008W | Users Guide - Page 54
    3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent
  • Epson EB-PU1008W | Users Guide - Page 55
    Network Follow the instructions in these it from a software CD, if included, or download the software and manuals as necessary. Note: If your projector is connected via a LAN projector wirelessly through the access point using the Epson network software. Connecting to a Wired Network Selecting
  • Epson EB-PU1008W | Users Guide - Page 56
    2. Connect the other end of the cable to the projector's LAN port. Parent topic: Wired Network Projection Selecting Wired Network Settings Before you can project from computers on your network, you must select the network settings for the projector using its menu system. Note: Make sure you
  • Epson EB-PU1008W | Users Guide - Page 57
    • Moderator Password lets you enter a password up to 4 numbers long for accessing the projector as a moderator with the Epson iProjection (Windows/Mac) software or the Epson iProjection app. • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in
  • Epson EB-PU1008W | Users Guide - Page 58
    that lets you quickly connect your iOS or Android devices using the Epson iProjection app. Note: Use the displayed keyboard to enter the name, addresses automatically, turn on the DHCP setting. • If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet Mask, and
  • Epson EB-PU1008W | Users Guide - Page 59
    and follow the on-screen instructions to save your settings projector and computer for wireless projection. Note: The Epson 802.11b/g/n wireless LAN module is not included with a software CD, if included, or download the software and manuals as necessary. Note: If your projector is connected via a
  • Epson EB-PU1008W | Users Guide - Page 60
    1. Turn off the projector and unplug the power cord. 2. Loosen the screws and remove the air filter cover as shown (it is attached with a tether). 3. Insert the wireless LAN module into the port. 60
  • Epson EB-PU1008W | Users Guide - Page 61
    use it to connect a mobile device using the Epson iProjection app. Note: Make sure you have installed the latest version of Epson iProjection on your device. Visit epson.com/iprojection (U.S.), epson.ca/iprojection (Canada), or latin.epson.com/iprojection (Caribbean) for more information. 1. Press
  • Epson EB-PU1008W | Users Guide - Page 62
    2. Select the Network menu and press Enter. 3. Select Network Configuration and press Enter. 4. Select the Basic menu and press Enter. 5. Set the Display LAN Info setting to Text & QR Code. 6. Select Complete and follow the on-screen instructions to save your settings and exit the menus. 62
  • Epson EB-PU1008W | Users Guide - Page 63
    with your projector. 1. Create a Quick Wireless Connection USB Key with a USB flash drive and the Epson iProjection (Windows/Mac) software. Note: See the Epson iProjection Operation Guide (Windows/Mac) for instructions. 2. Turn on the projector. 3. Press the LAN button on the remote control. You see
  • Epson EB-PU1008W | Users Guide - Page 64
    Allow on the next screen. 10. Follow the on-screen instructions to install the Epson iProjection (Windows/Mac) software. Note: If you see a Windows . Parent topic: Wireless Network Projection Selecting Wireless Network Settings Manually Before you can project from your wireless network, you must
  • Epson EB-PU1008W | Users Guide - Page 65
    3. Select the Network menu and press Enter. 4. Set the Wireless Mode setting to Wireless LAN On and press 5. Select Network Configuration and press Enter. 6. Select the Basic menu and press Enter. Enter. 7. Select the following basic options as necessary: • Projector Name lets you enter a name up
  • Epson EB-PU1008W | Users Guide - Page 66
    displays network information. You can select an option to display a QR code that lets you quickly connect your iOS or Android devices with the Epson iProjection app. Note: Use the displayed keyboard to enter the name, passwords and keyword. Press the arrow buttons on the remote control to highlight
  • Epson EB-PU1008W | Users Guide - Page 67
    on the Wireless LAN menu as necessary for your network. 10. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. After you complete the wireless settings for your projector, you need to select the wireless network
  • Epson EB-PU1008W | Users Guide - Page 68
    Setting Search Access Point SSID Security Passphrase EAP Method Channel Options Description To Search View Search for available wireless network access points in Advanced connection mode Up 32 alphanumeric characters Sets the SSID (network name) of the wireless LAN system the projector is
  • Epson EB-PU1008W | Users Guide - Page 69
    the IPv6 settings when you connect the projector to the network using IPv6 The Epson Web Control and PJLink functions support IPv6. Parent topic: Selecting Wireless Network Settings Manually Selecting Wireless Network Settings in Windows Before connecting to the projector, select the correct
  • Epson EB-PU1008W | Users Guide - Page 70
    Selecting Wireless Network Settings on Mac Before connecting to the projector, select the correct wireless network on your Mac. 1. Click the AirPort icon on the menu bar at the top of the screen. 2. Make sure AirPort is turned on, then do one of the following: • If your projector is set up on an
  • Epson EB-PU1008W | Users Guide - Page 71
    the following depending on the network security setting you selected: • WPA2-PSK, WPA3-PSK, or WPA2/WPA3-PSK: Select Complete and follow the on-screen instructions to save your settings and exit the menus. Skip the remaining steps. • WPA3-EAP or WPA2/WPA3-EAP: Select EAP Method and press Enter
  • Epson EB-PU1008W | Users Guide - Page 72
    When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Wireless Network to send you an e-mail alert over the network if there is a problem with the projector. 1. Press the Menu button. 2. Select the Network menu
  • Epson EB-PU1008W | Users Guide - Page 73
    as the Notified IP Address setting. 11. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert. Network Projector E-mail Alert
  • Epson EB-PU1008W | Users Guide - Page 74
    : • The email address entered as the From setting • Epson Projector on the subject line • The name of the projector experiencing a problem • The IP address of the affected projector • Detailed information about the problem Note: If a critical problem causes a projector to shut down, you may not
  • Epson EB-PU1008W | Users Guide - Page 75
    the Message Broadcasting feature in the Epson Projector Management software (Windows only). settings, select Complete and follow the on-screen instructions to save your settings and exit the menus . Note: The web setup and control features support Microsoft Internet Explorer 11.0 or later (Windows),
  • Epson EB-PU1008W | Users Guide - Page 76
    your user name and password. (The default user name is EPSONWEB and the default password is the projector's serial number.) You see the Epson Web Control screen. 1 Select Basic Control to control the projector remotely. 2 Select OSD Control Pad to change the projector's menu settings. 3 Select Test
  • Epson EB-PU1008W | Users Guide - Page 77
    4. Select the option corresponding to the projector function you want to control. Web Control Options Viewing an Image Capture of the Displayed Image from a Remote Location Parent topic: Using the Projector on a Network Related references Projector Setup Settings - Extended Menu Web Control Options
  • Epson EB-PU1008W | Users Guide - Page 78
    6 Turns off the projector OSD Control Pad 1 Returns to the Epson Web Control screen 2 Displays the projector's setting menus 3 Use your finger or mouse to navigate the menus 4 Returns projector to default settings 5 Returns to the
  • Epson EB-PU1008W | Users Guide - Page 79
    Lens Control Focus/Distortion screen 1 Returns to the Home screen 2 Focus adjustment slider 3 Focus adjustment buttons 4 Distortion adjustment slider 5 Distortion adjustment buttons 6 Displays the Focus/Distortion screen 7 Displays the Zoom screen 8 Displays the Lens Shift screen 79
  • Epson EB-PU1008W | Users Guide - Page 80
    9 Displays the Test Pattern screen 10 Displays the Memory screen Zoom screen Note: 1 Zoom adjustment slider 2 Zoom adjustment buttons 80
  • Epson EB-PU1008W | Users Guide - Page 81
    Lens Shift screen 1 The blue square displays the current image position and the red square displays the new image position 2 Displays the vertical image position; select to change the value 3 Moves the image position up, down, left, or right 4 Moves the lens to the home position 5 Displays the
  • Epson EB-PU1008W | Users Guide - Page 82
    Test Pattern screen 1 Displays available test patterns; select to project a test pattern 2 Turns off test pattern display 82
  • Epson EB-PU1008W | Users Guide - Page 83
    Memory screen 1 Overwrites your current settings with saved settings 2 Saves your current settings to memory 3 Displays a list of saved memories 4 Erases a saved memory 5 Renames a saved memory Status Information screen 83
  • Epson EB-PU1008W | Users Guide - Page 84
    1 Returns to the Home screen 2 Displays a list of monitored settings 3 Displays the setting status 4 Select to view different status information Remote Camera Access screen 1 Displays the image you captured using the Shoot button 2 Takes a picture of the projected image using the camera on the front
  • Epson EB-PU1008W | Users Guide - Page 85
    when using this feature: • This feature is not supported when performing the following functions: Tiling, Tiling Assist, stacking assist tool, Screen Matching, Color Calibration, Lens Calibration, Message Broadcasting in the Epson Projector Management software. • Using this feature cancels the
  • Epson EB-PU1008W | Users Guide - Page 86
    a computer or mobile device connected to the projector over a network connection. 11. Enter the projector's IP address in your browser's address box to connect to Epson Web Control. 86
  • Epson EB-PU1008W | Users Guide - Page 87
    LAN on the Network menu. 12. Select Remote Camera Access. Note: You may need to log in to access some of the options on the Epson Web Control screen. If you see a log in window, enter your user name and password. (The default user name is EPSONWEB and the default password
  • Epson EB-PU1008W | Users Guide - Page 88
    can select projector settings, control projection, and edit playlists using a web browser. Note: You can also control the projector using a web browser through the Epson iProjection app. Note: Do not remove any USB device connected to the projector or unplug the power cord when the Playlists or USB
  • Epson EB-PU1008W | Users Guide - Page 89
    4. Type the projector's IP address into the browser's address box and press the computer's Enter key. You see the Epson Web Control screen. 1 Controls the projector remotely 2 Edits playlists for Content Playback mode 3 Opens the Time Table screen 4 Operates the projector's menus with your finger
  • Epson EB-PU1008W | Users Guide - Page 90
    5. Select the option corresponding to the projector function you want to control. Note: You may need to log in to access some of the options on the Web Control screen. If you see a log in window, enter your user name and password. (The default user name is EPSONWEB and the default password is the
  • Epson EB-PU1008W | Users Guide - Page 91
    need to enter your user name and password. (The default username is EPSONREMOTE and the default password is the projector's serial number.) 1 Returns to the Epson Web Control screen 2 Turns the projector on or off 3 Selects the input source 4 A/V Mute button control 5 Turns Overlay Effect on or off
  • Epson EB-PU1008W | Users Guide - Page 92
    7 Selects your favorite playlists 8 Adjusts the speaker volume Playlists 1 Returns to the Epson Web Control screen 2 Controls playback of the playlist 3 Edits, copies, or deletes the playlist 4 Creates a new playlist 92
  • Epson EB-PU1008W | Users Guide - Page 93
    USB Memory Device 1 Returns to the Epson Web Control screen 2 Uploads images or videos to add to playlists on a USB device 3 Deletes images or videos on the USB device 93
  • Epson EB-PU1008W | Users Guide - Page 94
    Time Table 1 Returns to the Epson Web Control screen 2 Turns the time table on or off (see the Epson Projector Content Manager Operation Guide for more information) 94
  • Epson EB-PU1008W | Users Guide - Page 95
    menus 4 Returns projector to default settings 5 Returns to the previous menu 6 Displays help topics Note: You cannot change some settings using Epson Web Control. Parent topic: Controlling a Networked Projector in Content Playback Mode Using Crestron Connected If you are using the Crestron Connected
  • Epson EB-PU1008W | Users Guide - Page 96
    Note: You cannot use the Message Broadcasting feature in the Epson Projector Management software when you use Crestron Connected. For additional information on Crestron Connected, contact Crestron. Setting Up Crestron Connected Controlling a Networked Projector Using Crestron
  • Epson EB-PU1008W | Users Guide - Page 97
    Note: Enabling Crestron Connected disables the Message Broadcasting feature in the Epson Projector Management software. 6. When you are finished selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Using Crestron Connected
  • Epson EB-PU1008W | Users Guide - Page 98
    Parent topic: Using Crestron Connected Registering a Digital Certificate on the Projector Follow the instructions here if you need to install a digital certificate on the projector to provide security for your presentation files. Note: You can register a digital certificate over a
  • Epson EB-PU1008W | Users Guide - Page 99
    5. Select the Others menu and press Enter. 6. Select On as the Secure HTTP setting. 7. Select the Web Server Cert. setting and press Enter. 8. Select Register and press Enter. 9. Insert a USB flash drive into the projector's USB-A port. If the wireless LAN module is installed, remove it before
  • Epson EB-PU1008W | Users Guide - Page 100
    3. Press the USB button on the projector remote control. The PC Free screen appears. 4. Do the following as necessary to locate your files: • To display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder
  • Epson EB-PU1008W | Users Guide - Page 101
    • To register a CA Certificate, select the CA certificate file icon and press Enter. The password screen is displayed (for Client or Web Server Certificates) or the certificate contents is displayed (for CA Certificates). 6. If you see the password screen, enter the certificate password using the
  • Epson EB-PU1008W | Users Guide - Page 102
    5. Enter the following information in uppercase or lowercase letters, exactly as shown: • For the user ID, enter EPSONWEB. (You cannot change the user ID.) • For the password, enter the projector's serial number. (You can change the Web Control password using the projector's Network menu.) 6. Select
  • Epson EB-PU1008W | Users Guide - Page 103
    Parent topic: Registering a Digital Certificate on the Projector Digital Certificate Types You can register these types of digital certificates. Client Certificate (PEAP-TLS/EAP-TLS) Specification Format Extension Encryption Hashes Key length Password Description PKCS#12 PFX, P12 RSA MD5/SHA-1/SHA
  • Epson EB-PU1008W | Users Guide - Page 104
    Specification Key length Common name Organization Password Description 512/1024/2048/4096 bit Network host name Optional Up to 64 alphanumeric characters; required Parent topic: Registering a Digital Certificate on the Projector 104
  • Epson EB-PU1008W | Users Guide - Page 105
    Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the Projector Menus Setting
  • Epson EB-PU1008W | Users Guide - Page 106
    1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an electrical outlet. The projector's On/Standby light turns blue. This indicates that the projector is receiving power. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. If
  • Epson EB-PU1008W | Users Guide - Page 107
    • Turn on the connected computer or video device. • Insert a DVD or other video media and press the play button, if necessary. • Press the Source Search button on the projector or the Search button on the remote control to detect the video source. Note: If the Auto Source Search setting in the
  • Epson EB-PU1008W | Users Guide - Page 108
    to navigate the screen, and press Enter to select an option. 1 Select the video source you want to project 2 Display the Connection Guide 3 Indicates the Content Playback mode 4 Display the Help screen 5 Display the projector's menus 6 Select customizable menu options 7 Select to change the Light
  • Epson EB-PU1008W | Users Guide - Page 109
    again. (To leave it on, press any other button.) The projector beeps twice, the laser turns off, and the Status light turns off. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary). 109
  • Epson EB-PU1008W | Users Guide - Page 110
    3. To transport or store the projector, make sure the Status light is off, then unplug the power cord. Parent topic: Using Basic Projector Features Related tasks Turning On the Projector Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another
  • Epson EB-PU1008W | Users Guide - Page 111
    3. Select the Extended menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Setting the Date and Time You can set the date and time for the
  • Epson EB-PU1008W | Users Guide - Page 112
    You see a screen like this: 5. Select your date and time settings. Then select Set and press 6. When you are finished, press the Menu button to exit. Date and Time Settings Parent topic: Using Basic Projector Features Related concepts Password Security Types Enter to confirm your changes. Date
  • Epson EB-PU1008W | Users Guide - Page 113
    Settings Daylight Saving Time Options Daylight Saving Time DST Start DST End DST Adjustment (min) Internet Time Internet Time Internet Time Server Description Adjusts the daylight saving time settings Daylight Saving Time: enables or disables daylight saving time DST Start and DST End: sets the
  • Epson EB-PU1008W | Users Guide - Page 114
    2. Press the Lens button on the control panel repeatedly until the zoom adjustment screen appears, or press the Zoom button on the remote control. 3. Press and hold the arrow buttons on the projector's control panel or remote control to resize the image. 4. Press the Esc button when finished. Parent
  • Epson EB-PU1008W | Users Guide - Page 115
    2. Press the Lens button on the control panel repeatedly until the focus adjustment screen appears, or press the Focus button on the remote control. 3. Press the Esc button when finished. Focusing the Image When Using an Optional Short Throw Lens Parent topic: Using Basic Projector Features Focusing
  • Epson EB-PU1008W | Users Guide - Page 116
    3. Press the left or right arrow buttons until the center of the image is focused. 4. Press the Focus button on the remote control or press the Lens button on the control panel repeatedly until the distortion adjustment screen appears. 5. Press the left or right arrow buttons until the edges of the
  • Epson EB-PU1008W | Users Guide - Page 117
    and you see a message prompting you to manually adjust the image distortion, manually rotate the distortion ring counterclockwise. Adjust the focus Screen Type setting is not supported by the Message Broadcasting feature in the Epson Projector Management software. 1. Turn on the projector and display
  • Epson EB-PU1008W | Users Guide - Page 118
    2. Press the Menu button. 3. Select the Extended menu and press Enter. 4. Select Display > Screen > Screen Type. You see this screen: 5. Select your screen's aspect ratio and press Enter. 6. Press the Menu button to exit. 7. Adjust the aspect ratio for the projected image, if necessary. Parent topic
  • Epson EB-PU1008W | Users Guide - Page 119
    2. Press the Lens Shift button on the remote control or the Lens button on the control panel. 3. Press the arrow buttons on the remote control or the control panel to adjust the position of the projected image as necessary. 4. When you are finished, press the Esc button on the control panel or
  • Epson EB-PU1008W | Users Guide - Page 120
    Note: You cannot adjust the screen position if the Screen Type setting is set to 16:10. 1. Turn on the projector and display an image. 2. Press the Menu button. 3. Select the Extended menu and press Enter. 4. Select Display > Screen > Screen Position. 5. Use the arrow buttons on the remote control
  • Epson EB-PU1008W | Users Guide - Page 121
    3. Press the Enter button or the left or right arrow button on the remote control, or press Enter on the control panel to cycle through the available test patterns. 4. Adjust the image as necessary. 5. Press the Esc button to clear the test pattern. Available Test Pattern Image Adjustments Parent
  • Epson EB-PU1008W | Users Guide - Page 122
    2 Except for the Screen, Panel Alignment, and Color Uniformity settings 3 Except for the Black Level, Scale, Color Uniformity, and Color Adjustment settings Parent topic: Displaying a Test Pattern Adjusting the Image Height If you are projecting from a table or other flat surface, and the image is
  • Epson EB-PU1008W | Users Guide - Page 123
    Parent topic: Using Basic Projector Features Related concepts Image Shape Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down,
  • Epson EB-PU1008W | Users Guide - Page 124
    Note: You can also display a pattern to aid in adjusting the projected image using the Test Pattern button on the remote control. 2. Press the Menu button. 3. Select the Settings menu and press Enter. 4. Select the Geometry Correction setting and press Enter. Note: You can also access the geometric
  • Epson EB-PU1008W | Users Guide - Page 125
    6. Use the arrow buttons on the projector or the remote control to select between vertical and horizontal keystone or balance correction and to adjust the image shape as necessary. V-Keystone V-Balance H-Keystone H-Balance 125
  • Epson EB-PU1008W | Users Guide - Page 126
    7. When you are finished, press Esc. After correction, your image is slightly smaller. Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Related tasks Displaying a Test Pattern Correcting Image Shape with Quick Corner You can use the projector's Quick Corner
  • Epson EB-PU1008W | Users Guide - Page 127
    3. Select the Settings menu and press Enter. 4. Select the Geometry Correction setting and press Enter. 5. Select the Quick Corner setting and press Enter. Then press You see the Quick Corner adjustment screen: Enter again. Note: To reset your adjustments, press and hold the Esc button for at
  • Epson EB-PU1008W | Users Guide - Page 128
    6. Use the arrow buttons on the projector or remote control to select the corner of the image you want to adjust. Then press Enter. 7. Press the arrow buttons to adjust the image shape as necessary. 8. When you are finished, press Esc. Parent topic: Image Shape Related references Projector Feature
  • Epson EB-PU1008W | Users Guide - Page 129
    Note: You can also display a pattern to aid in adjusting the projected image using the Test Pattern button on the remote control. 2. Press the Menu button. 3. Select the Settings menu and press Enter. 4. Select the Geometry Correction setting and press Enter. 5. Select the Curved Surface setting and
  • Epson EB-PU1008W | Users Guide - Page 130
    6. Select the Curved Surface setting and press Enter. You see this screen: 7. Select the Correct Shape setting and press Enter. 8. Use the arrow buttons on the projector or the remote control to select the area you want to adjust. Then press Enter. Note: To reset your adjustments, press and hold the
  • Epson EB-PU1008W | Users Guide - Page 131
    9. Use the arrow buttons on the projector to adjust the image shape. Note: If the adjustment triangle turns gray, you cannot adjust the shape any further in that direction. 10. Press the Esc button to return to the Curved Surface menu screen. 11. Repeat the previous three steps as necessary to
  • Epson EB-PU1008W | Users Guide - Page 132
    • Press the right arrow button to expand the distance between the lines closest to the baseline. 15. When you are finished, press the Menu button. Note: If necessary, you can adjust the image tilt using the Quick Corner setting, then fine-tune your adjustments using the Point Correction setting.
  • Epson EB-PU1008W | Users Guide - Page 133
    after performing the steps here. If you see a 4K Enhancement message, select Yes to disable the 4K Enhancement feature. Corner Wall is not supported for the ELPLX01/ELPLX01W/ELPLX01S/ELPLX02/ELPLX02S/ELPLX02W lens. 1. Turn on the projector and display an image. Note: You can display a pattern to
  • Epson EB-PU1008W | Users Guide - Page 134
    You see this screen: 6. Select the Corner Wall setting and press Enter. You see this screen: 7. Select the Corner Type setting and press Enter. 8. Select one of the following: • Horizontal Corner when the surfaces line up horizontally 134
  • Epson EB-PU1008W | Users Guide - Page 135
    • Vertical Corner when the surfaces line up vertically 9. Press the Esc button to return to the Corner Wall menu screen. 10. Select the Correct Shape setting and press Enter. 11. Adjust the projector's position and use lens shift to center the image over the point where the two surfaces meet. (The
  • Epson EB-PU1008W | Users Guide - Page 136
    12. Press the arrow buttons on the projector or the remote control to select the area you want to adjust. Then press Enter. • For horizontal corners, adjust the top area using the lowest point (indicated by the blue arrow) as your reference. Adjust the lower area using the highest point (indicated
  • Epson EB-PU1008W | Users Guide - Page 137
    Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a reset screen. Then select Yes. 13. Press and hold the arrow buttons on the projector or remote control to adjust the image shape. 14. Repeat the previous two steps as necessary to adjust other image
  • Epson EB-PU1008W | Users Guide - Page 138
    Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Related tasks Displaying a Test Pattern Correcting Image Shape with Quick Corner Correcting Image Shape with Point Correction Correcting Image Shape with Point Correction You can use the projector's Point
  • Epson EB-PU1008W | Users Guide - Page 139
    3. Select the Settings menu and press Enter. 4. Select the Geometry Correction setting and press Enter. 5. Select the Point Correction setting and press Enter. Note: If you see a confirmation message, press Enter. You see this screen: 6. Select the Point Correction setting and press Enter. 139
  • Epson EB-PU1008W | Users Guide - Page 140
    You see this screen: 7. Select the Point Correction setting and press Enter. 8. Select the number of grid lines to display and press Enter. Note: If you need to change the color of the grid lines, select the Pattern Color setting and select a suitable color. 9. Press the arrow buttons on the
  • Epson EB-PU1008W | Users Guide - Page 141
    10. Press the arrow buttons to correct the image shape in all necessary directions. Note: You can press Enter to show or hide the image and grid to check the results. 11. Press Esc to return to the previous screen and select another point to correct, if necessary. 12. When you are finished, press
  • Epson EB-PU1008W | Users Guide - Page 142
    3. Do one of the following: • Press the Source Search button on the projector or the Search button on the remote control until you see the image from the source you want. • Press the button for the source you want on the remote control. 1 HDMI port source 2 HDBaseT port source 3 Computer port source
  • Epson EB-PU1008W | Users Guide - Page 143
    4 Network port source 5 SDI source (EB-PU2010B/EB-PU2010W only) 6 DVI-D source • Press the Home button on the remote control and select your image source. Parent topic: Using Basic Projector Features Related references
  • Epson EB-PU1008W | Users Guide - Page 144
    Make sure that you aim the remote control at the projector's receivers within the angles listed here. 1 98.4 feet (30 m) 2 60° 3 30° 4 20° 5 10° 6 50° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands
  • Epson EB-PU1008W | Users Guide - Page 145
    Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. • Front (default setting) lets you project from a table in front of the screen. • Front/Ceiling flips the image over top-to-bottom to project upside-down from
  • Epson EB-PU1008W | Users Guide - Page 146
    Changing the Projection Mode Using the Menus You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus. 1. Turn on the projector and display an image. 2. Press the Menu button. 3. Select the Extended menu and press Enter. 4. Select the
  • Epson EB-PU1008W | Users Guide - Page 147
    from a computer and parts of the image are cut off, set the Resolution setting to Wide or Normal in the Signal menu. Choose the Manual setting to set a specific resolution. Parent topic: Image Aspect Ratio Related references Input Signal Settings - Signal Menu Related tasks Setting the Screen Type
  • Epson EB-PU1008W | Users Guide - Page 148
    Available Image Aspect Ratios You can select the following image aspect ratios, depending on the selected Screen Type setting and the input signal from your image source. Note: Black bands and cropped or stretched images may project in certain aspect ratios, depending on the aspect ratio and
  • Epson EB-PU1008W | Users Guide - Page 149
    Color Mode The projector offers different Color Modes to provide optimum brightness, contrast, and color for a variety of viewing environments and image types. You can select a mode designed to match your image and environment, or experiment with the available modes. If you always want to use a
  • Epson EB-PU1008W | Users Guide - Page 150
    Available Color Modes You can set the projector to use these Color Modes, depending on the input source you are using: Color Mode Dynamic Presentation Natural Cinema BT.709 DICOM SIM* Multi-Projection Description Best for projecting in a bright room Best for color presentations in a bright room
  • Epson EB-PU1008W | Users Guide - Page 151
    3. Select the Settings menu and press Enter. 4. Select the Brightness Settings setting and press Enter. 5. Select the Light Source Mode setting and press Enter. 6. Select one of the following options: • Normal: Sets brightness to the maximum level (ideal for conference rooms, auditoriums, and
  • Epson EB-PU1008W | Users Guide - Page 152
    • Quiet: Sets brightness to 70% and reduces fan noise (ideal for libraries, theaters, museums, and art galleries) • Extended: Sets brightness to 70% and extends the life expectancy of the light source (ideal for darker environments with ambient light, such as museums and art galleries, where a
  • Epson EB-PU1008W | Users Guide - Page 153
    Constant Brightness Usage Hours If you turn on the Constant Brightness setting, the number of hours the projector can maintain constant brightness is displayed as the Estimated Remains setting. Display level Estimated remaining hours 10000 or more hours 8000 to 9999 hours 6000 to 7999 hours 4000
  • Epson EB-PU1008W | Users Guide - Page 154
    Brightness Level setting 100% 90% 80% 70% 60% 50% 40% 30% Constant Brightness on Hours 20000 hours 21000 hours 24000 hours 30000 hours 37000 hours 47000 hours 61000 hours 71000 hours 1 Brightness level 2 Time the projector can maintain constant brightness (approximate) Brightness Level setting 85
  • Epson EB-PU1008W | Users Guide - Page 155
    Note: The light source usage hours vary depending upon environmental conditions and usage. The hours listed here are an approximate and are not guaranteed. After 20000 hours of use, you may need to replace parts in the projector. If Constant Brightness is turned on, and you have exceeded the usage
  • Epson EB-PU1008W | Users Guide - Page 156
    4. To automatically adjust the amount of light based on the brightness of the image, select the Dynamic Contrast setting and press Enter. Choose from the following options: • Dynamic Contrast: Select On to automatically adjust the amount of light according to the brightness of the image. • Response
  • Epson EB-PU1008W | Users Guide - Page 157
    6. To automatically turn off the light source after a certain time has elapsed while projecting at the specified video level, select the Lights-Out Control setting and press Enter. Choose from the following options: • Lights-Out Control: Select On to automatically turn off the light after a certain
  • Epson EB-PU1008W | Users Guide - Page 158
    You can project playlists that contain images and movies in Content Playback mode. 1. Create a playlist and export it to a USB device using the Epson Projector Content Manager software. Note: See the Epson Projector Content Manager Operation Guide for more information. 2. Turn on the projector. 158
  • Epson EB-PU1008W | Users Guide - Page 159
    3. Press the Menu button. 4. Select the Settings menu and press Enter. 5. Select the Content Playback setting and press Enter. 6. Select the On setting and press Enter. You see a confirmation prompt. 7. Turn off the projector. 8. Turn on the projector again to enable Content Playback mode. 9. Press
  • Epson EB-PU1008W | Users Guide - Page 160
    Related references Projector Feature Settings - Settings Menu Related tasks Using the Home Screen Adding Effects to the Projected Image You can add color and effects to the projected image in Content Playback mode. Note: When you use the effects feature, select Refresh Mode > Start on the Reset menu
  • Epson EB-PU1008W | Users Guide - Page 161
    5. Select the Overlay Effect setting again and select On. 6. Select the Shape Filter setting and adjust the options as necessary. • Shape: select a circle, rectangle, or other shape effect • Filter Effect: select an option to mask the inside or outside of the shape • Size: set the shape size •
  • Epson EB-PU1008W | Users Guide - Page 162
    Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporarily Zooming Into and Out of
  • Epson EB-PU1008W | Users Guide - Page 163
    Note: To fade the image in and out when you use A/V Mute, turn on the Fade-out and/or Fade-in settings in the Extended menu. Note: If you selected A/V Mute as the Release A/V Mute setting in the Extended menu, you can still control the projector while A/V Mute is enabled. Parent topic: Adjusting
  • Epson EB-PU1008W | Users Guide - Page 164
    Zooming Into and Out of Images You can draw attention to parts of a presentation by zooming into a portion of the image and enlarging it on the screen. Note: This feature is unavailable if the Scale setting in the Signal menu or Extended menu is enabled. 1. Press the E-Zoom + button on the remote
  • Epson EB-PU1008W | Users Guide - Page 165
    Related references Projector Reset Options - Reset Menu Projector Setup Settings - Extended Menu Projector Security Features You can secure your projector to deter theft or prevent unintended use by setting up the following security features: • Password security to prevent the projector from being
  • Epson EB-PU1008W | Users Guide - Page 166
    Note: Additional security measures are available for the Remote Camera Access feature. Contact Epson for details. Setting a Password Selecting Password Security Types Entering a Password to Use the Projector Saving a User's Logo Image to Display Parent topic: Projector Security Features
  • Epson EB-PU1008W | Users Guide - Page 167
    4. Press and hold down the Num button on the remote control and use the numeric buttons to set a four-digit password. The password displays as **** as you enter it. Then you see the confirmation prompt. 5. Enter the password again. You see the message "Password accepted." 6. Press Esc to return to
  • Epson EB-PU1008W | Users Guide - Page 168
    If you do not see this menu, hold down the Freeze button on the remote control for about 5 seconds or until the menu appears. • To prevent unauthorized use of the projector, select Power On Protection, press Enter, select On, press Enter again, and press Esc. • To prevent changes to the User's Logo
  • Epson EB-PU1008W | Users Guide - Page 169
    password several times in succession, the projector displays a request code and a message to contact Epson Support. Do not attempt to enter the password again. When you contact Epson Support, provide the displayed request code and proof of ownership for assistance in unlocking the projector. Parent
  • Epson EB-PU1008W | Users Guide - Page 170
    2. Press the Menu button, select the Extended menu, and press Enter. 3. Select the User's Logo setting and press Enter. 4. Select Start Setting and press Enter. 5. A prompt appears asking if you want to use the displayed image as the user's logo. Select Yes and press Enter. 6. A prompt appears again
  • Epson EB-PU1008W | Users Guide - Page 171
    Locking the Projector's Lens Settings and Buttons You can lock the buttons on the projector's control panel to prevent anyone from using the projector. You can also lock the zoom, focus, and lens shift settings to prevent them from being adjusted. Note: You can use the remote control to control the
  • Epson EB-PU1008W | Users Guide - Page 172
    You see a confirmation prompt. 5. Select Yes and press Enter. Unlocking the Projector's Buttons Parent topic: Projector Security Features Unlocking the Projector's Buttons If the projector's buttons have been locked, hold the Enter button on the projector's control panel for 7 seconds to unlock them
  • Epson EB-PU1008W | Users Guide - Page 173
    To lock the remote control buttons shown here, press and hold the Home button on the remote control for approximately 5 seconds. (To unlock the buttons, press and hold the Home button again for approximately 5 seconds.) Note: If you lock the remote control buttons, you can still reset the Remote
  • Epson EB-PU1008W | Users Guide - Page 174
    • Use the security slot on the projector to attach a Kensington lock. See your local computer or electronics dealer for purchase information. • Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture. Parent topic: Projector
  • Epson EB-PU1008W | Users Guide - Page 175
    may not be available and some settings may be automatically applied to both images. Note: Input signals with a horizontal resolution greater than 1920 are not supported. You cannot use split screen with the following input source combinations: • Computer and LAN • DVI-D and HDMI 175
  • Epson EB-PU1008W | Users Guide - Page 176
    1. Press the Split button on the remote control. The currently selected input source moves to the left side of the screen. 2. Press the Menu button. You see this screen: 3. To select an input source for the other image, select the Source setting, press Enter, select the input source, select Execute,
  • Epson EB-PU1008W | Users Guide - Page 177
    press the Split or Esc button. Parent topic: Adjusting Projector Features Enter, select an Using Advanced Image Adjustment Features Follow the instructions in these sections to use your projector's advanced image adjustments. Note: Not all adjustments may be available depending on the projection
  • Epson EB-PU1008W | Users Guide - Page 178
    You cannot use this feature in any of the following conditions: • The image signal exceeds WUXGA • You turned on the 4K Enhancement, Edge Blending, or Scale settings • You selected V-Zoom as the Aspect setting • You turned off the Image Preset Mode setting 1. Press the Menu button. You see a screen
  • Epson EB-PU1008W | Users Guide - Page 179
    5. When you are finished, press the Menu button. Note: If your resulting images contain noise, turn off the Frame Interpolation setting. Parent topic: Using Advanced Image Adjustment Features Related references Image Quality Settings - Image Menu Projector Feature Settings - Settings Menu Projector
  • Epson EB-PU1008W | Users Guide - Page 180
    3. Select the 4K Enhancement setting and press Enter. 4. Select one of the following options and press Enter: • Off to disable 4K enhancement when projecting from computers or multiple projectors • Full HD to enhance a signal with a resolution of 1080i/1080p/WUXGA or higher • WUXGA+ to enhance a
  • Epson EB-PU1008W | Users Guide - Page 181
    You see a screen like this: 2. Select the Image Enhancement setting and press Enter. 3. Select the Image Preset Mode setting and press Enter. 4. Select one of the presets and press Enter. Note: If you select a previously used preset, your new adjustments overwrite the old ones. 5. Press Esc to
  • Epson EB-PU1008W | Users Guide - Page 182
    • Noise Reduction • MPEG Noise Reduction • Super-resolution • Detail Enhancement 7. Press Menu or Esc to exit the menus. The currently selected Image Preset Mode will be updated with the current settings. Parent topic: Using Advanced Image Adjustment Features Related references Image Quality
  • Epson EB-PU1008W | Users Guide - Page 183
    2. Select the Image Enhancement setting and press Enter. 3. Select the MPEG Noise Reduction setting and press Enter. 4. Select the level of noise reduction and press Enter. 5. Press Menu or Esc to exit the menus. Parent topic: Using Advanced Image Adjustment Features Related tasks Using 4K
  • Epson EB-PU1008W | Users Guide - Page 184
    You see a screen like this: 3. Select the Image Enhancement setting and press Enter. 4. Select the Super-resolution setting and press Enter. 5. Adjust each of the following options as necessary: • Fine Line Adjust to enhance fine details such as hair and fabric patterns • Soft Focus Detail to
  • Epson EB-PU1008W | Users Guide - Page 185
    Note: This feature is not available if the Image Preset Mode setting is set to Off. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Menu button. You see a screen like this: 3. Select the Image Enhancement setting and press Enter. 4. Select the Detail Enhancement
  • Epson EB-PU1008W | Users Guide - Page 186
    Adjusting the Color Convergence (Panel Alignment) You can use the Panel Alignment feature to manually adjust the color convergence (the alignment of the red and blue colors) in the projected image. Note: You can adjust only the red or blue
  • Epson EB-PU1008W | Users Guide - Page 187
    11. Select the Pattern Color setting and press Enter. 12. Select the pattern you want to use and press Enter. 13. Press Esc to return to the previous screen. 14. Select Start Adjustments and press Enter. You see this screen: 15. First, select Shift the whole panel to adjust the entire panel and
  • Epson EB-PU1008W | Users Guide - Page 188
    You see a screen like this: 18. Use the arrow buttons on the remote control to adjust the color alignment of the color you selected for the Select Color setting and press Enter. 19. When you are finished adjusting each corner of the screen, press Enter. You see this screen: 188
  • Epson EB-PU1008W | Users Guide - Page 189
    menu. Parent topic: Using Advanced Image Adjustment Features Adjusting the Color Tone (Color Uniformity) You can use the Color Uniformity feature to manually adjust the color tone balance in the projected image. 1. Press the Menu button. 2. Select the Extended menu and press Enter. 3. Select the
  • Epson EB-PU1008W | Users Guide - Page 190
    You see this screen: 5. Press Enter and select On. 6. Press Esc. 7. Select the Adjustment Level setting and press Enter. 8. Press the right and left arrow buttons to adjust the level, and press Esc. 9. Select the Start Adjustments setting and press Enter. 10. Select the area of the screen that you
  • Epson EB-PU1008W | Users Guide - Page 191
    . You should perform light source calibration every 100 hours of projector usage. You can also schedule automatic calibration or run the light source calibration manually using the menus. Note: To perform a light source calibration, the projector must have been on for at least 20 minutes and the
  • Epson EB-PU1008W | Users Guide - Page 192
    more projectors to create one large image. Follow the instructions in these sections to set up and project from multiple the projectors are not connected to a network, you can match each projector's images manually. Note: Make sure all networked projectors are connected using LAN cables and have been
  • Epson EB-PU1008W | Users Guide - Page 193
    overlaying images from up to 6 projectors. Use the Simple Stacking setting in the projector menu, or you can also use Epson Projector Professional Tool. Parent topic: Using Multiple Projectors Related concepts Wired Network Projection Projector Placement Projector Identification System for Multiple
  • Epson EB-PU1008W | Users Guide - Page 194
    Adjusting the Black Level Scaling an Image Running Light Source Calibration Related topics Tiling Images into One Image Matching Tint and Brightness (Screen Matching) Simple Stacking for One Bright Image Projector Identification System for Multiple Projector Control You can operate multiple
  • Epson EB-PU1008W | Users Guide - Page 195
    Note: If you don't know the projector's ID, press the ID button to temporarily display the projector's ID on the screen. Parent topic: Projector Identification System for Multiple Projector Control Setting the Remote Control ID The remote control's ID is set to 0 by default so it can operate any
  • Epson EB-PU1008W | Users Guide - Page 196
    . Note: You can automatically adjust the tiling using the Tiling Assist feature in the Epson Projector Professional Tool software available for download from the Epson website. Configuring Tiling Manually Parent topic: Using Multiple Projectors Related references Additional Projector Software and
  • Epson EB-PU1008W | Users Guide - Page 197
    4. Select Multi-Projection > Tiling > Layout. 5. Select the number of rows and columns you are setting up as the Row and Column settings. Then select Set and press Enter. 6. Repeat the previous steps with each projector you are setting up before continuing with the next step. 7. Select Location
  • Epson EB-PU1008W | Users Guide - Page 198
    • Column Order to layout the screens from left to right, starting with A on the left 9. Repeat the previous step with each projector you are setting up before continuing with the next step. 10. Select the input signal to display an image. After performing the steps here, adjust the images for any
  • Epson EB-PU1008W | Users Guide - Page 199
    You see this screen: 5. Turn on the Edge Blending, Line Guide, and Pattern Guide settings. Note: If the projected guide is unclear, try changing the Guide Color setting. 6. Select the edge you want to blend on each projector and press Enter. You see a screen like this: 7. Select the Blending setting
  • Epson EB-PU1008W | Users Guide - Page 200
    Blend Curve setting and select a gradient for the shaded area on the projectors. 13. When the edges are blended, turn off the Line Guide and Pattern Guide settings on each projector to check the final settings. 14. When you are finished, press the Menu button. Parent topic: Using Multiple Projectors
  • Epson EB-PU1008W | Users Guide - Page 201
    Adjusting the Black Level When two images overlap, the overlapping area can appear differently from the areas that do not overlap. You can use the projector's Black Level setting to make the difference less noticeable. You cannot adjust the Black Level setting if you are displaying a test pattern,
  • Epson EB-PU1008W | Users Guide - Page 202
    You see this screen: 5. Select the Color Adjustment setting and press Enter. You see a screen based on the Top Edge, Bottom Edge, Right Edge, and Left Edge settings you selected for the Edge Blending setting. Note: The Color Adjustment setting is automatically adjusted when selecting Start Auto
  • Epson EB-PU1008W | Users Guide - Page 203
    6. Select the area you want to adjust and press Enter. Note: The area you selected is displayed in orange. Adjust overlapping areas starting with the brightest areas first. For example, adjust area 2 to match area 1, then adjust area 3 to match area 2. 7. Adjust the brightness and tone of the areas
  • Epson EB-PU1008W | Users Guide - Page 204
    12. Select the Start Adjustments setting and press Enter. You see a screen with boundary lines indicating areas that are overlapping. The boundary lines are based on the Top Edge, Bottom Edge, Right Edge, and Left Edge settings you selected for the Edge Blending setting. 13. Use the arrow buttons to
  • Epson EB-PU1008W | Users Guide - Page 205
    . Brightness decreases over time, so you may need to perform Screen Matching again to correct large differences in brightness. Screen Matching Conditions Matching the Screens Manually Parent topic: Using Multiple Projectors 205
  • Epson EB-PU1008W | Users Guide - Page 206
    /Ceiling. Parent topic: Matching Tint and Brightness (Screen Matching) Related references Projector Setup Settings - Extended Menu Matching the Screens Manually You can manually correct the brightness and tint for multiple projectors. 1. Press the Menu button. 2. Select the Extended menu and press
  • Epson EB-PU1008W | Users Guide - Page 207
    You see a screen like this: 5. Select the Color Matching setting and press Enter. You see this screen: 6. Press the left or right arrow buttons to select a value for the Adjustment Level setting. Note: There are eight adjustment levels ranging from white to black and you can adjust each level
  • Epson EB-PU1008W | Users Guide - Page 208
    7. Press the left or right arrow buttons to adjust the color tone for the Red, Green, and Blue settings. 8. Press the left or right arrow buttons to adjust the Brightness setting. 9. Repeat the previous three steps as necessary to adjust each adjustment level. 10. Press the Esc button to return to
  • Epson EB-PU1008W | Users Guide - Page 209
    as the Scale setting: • Auto to automatically adjust the clipped areas according to the Edge Blending and Tiling settings you selected • Manual to adjust the clipped areas manually 6. Select the Scale Mode setting and select one of these options: • Zoom Display to maintain the image aspect ratio as
  • Epson EB-PU1008W | Users Guide - Page 210
    Auto as the Scale setting, you can skip the remaining steps. If you selected Manual, adjust each of the following options as necessary: • Select - or + to scale software from the Epson support website at epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Latin America).
  • Epson EB-PU1008W | Users Guide - Page 211
    Related references Additional Projector Software and Manuals Simple Stacking Conditions You can use the the images of up to 6 projectors. 1. Connect two projectors using a LAN cable. Note: For EB-PU2010B/EB-PU2010W, you can also connect the projectors using an SDI cable. 2. Turn on the projectors.
  • Epson EB-PU1008W | Users Guide - Page 212
    4. Adjust the image position, shape, and focus on one of the projectors (this projector becomes the "master" projector). 5. Press the Menu button. 6. Select the Extended menu and press Enter. 7. Select the Multi-Projection setting and press Enter. 8. Select the Simple Stacking setting and press
  • Epson EB-PU1008W | Users Guide - Page 213
    Saving Settings to Memory and Using Saved Settings You can save customized settings and then select the saved settings whenever you want to use them. 1. Turn on the projector and display an image. 2. Press the Menu button. 3. Select the Settings menu and press Enter. 4. Select the Memory setting and
  • Epson EB-PU1008W | Users Guide - Page 214
    Note: You can also access this screen by pressing the Memory button on the remote control. 5. Select one of the following options: • Memory: Saves or loads various settings; you can save up to 10 different memories Note: The following settings are saved: all settings from the Image menu, the Scale
  • Epson EB-PU1008W | Users Guide - Page 215
    • Erase Memory: Erases the selected memory settings • Rename Memory: Renames a saved memory • Reset Memory: Resets the name and settings of a saved memory Note: To reset all saved memories of all types, select Reset All Memories in the Reset menu. 7. Press Menu or Esc to exit. Parent topic:
  • Epson EB-PU1008W | Users Guide - Page 216
    You see a screen like this: 6. In the Event Settings section, select the events you want to have occur. (Select No Change for events that you do not want to occur.) 7. In the Date/Time Settings section, set the date and time for the scheduled events to occur. 8. When you are finished, select Save
  • Epson EB-PU1008W | Users Guide - Page 217
    2. Select the Extended menu and press Enter. 3. Select the Schedule Settings setting and press You see a screen like this: Enter. The colored boxes in the calendar indicate the following about the scheduled events: One-time event Recurring event Communication is on/off Event is invalid Parent
  • Epson EB-PU1008W | Users Guide - Page 218
    You see a screen like this: 4. Press the left or right arrow buttons to highlight the date on the calendar containing the scheduled event you want to edit. 5. Press the up or down arrow buttons to highlight the event you want to edit, and press Esc. 6. Select one of the following: • On/Disabled to
  • Epson EB-PU1008W | Users Guide - Page 219
    Epson Projector Management software. See the online Epson Projector Management Operation Guide for instructions. You can download the latest software and documentation from the Epson Network Settings - Network Menu Additional Projector Software and Manuals Saving Settings to a USB Flash Drive You can
  • Epson EB-PU1008W | Users Guide - Page 220
    2. Insert the flash drive into the USB-A port. Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be saved correctly. 3. Press and hold the Esc button on the control panel or remote control as you connect the power cord to the projector's power inlet.
  • Epson EB-PU1008W | Users Guide - Page 221
    Parent topic: Copying Menu Settings Between Projectors Transferring Settings from a USB Flash Drive After saving projector settings to a USB flash drive, you can transfer them to another projector of the same model. Note: Make sure the USB flash drive contains only a single settings transfer from
  • Epson EB-PU1008W | Users Guide - Page 222
    3. Press and hold the Menu button on the control panel or remote control as you connect the power cord to the projector's power inlet. 4. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release the Menu button. The lights flash to indicate that settings are
  • Epson EB-PU1008W | Users Guide - Page 223
    • macOS 11.x 1. Turn off the projector and unplug the power cord from the projector's power inlet. 2. Connect a USB cable to your projector's Service port. 3. Connect the other end to any available USB port on your computer. 4. Press and hold the Esc button on the control panel or remote
  • Epson EB-PU1008W | Users Guide - Page 224
    have to repeat your adjustments. 1. Turn off the projector and unplug the power cord from the projector's power inlet. 2. Connect a USB cable to your projector's Service port. 3. Connect the other end to any available USB port on your computer. 224
  • Epson EB-PU1008W | Users Guide - Page 225
    4. Press and hold the Menu button on the control panel or remote control as you connect the power cord to the projector's power inlet. 5. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release the Menu button. The projector shows up as a removable disk on
  • Epson EB-PU1008W | Users Guide - Page 226
    Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings -
  • Epson EB-PU1008W | Users Guide - Page 227
    You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source, resolution, your projector model, or
  • Epson EB-PU1008W | Users Guide - Page 228
    Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input source, make sure the source is connected and
  • Epson EB-PU1008W | Users Guide - Page 229
    Setting Sharpness White Balance Options Standard Thin Line Enhancement Thick Line Enhancement Color Temp. G-M Correction Offset R/G/B Gain R/G/B Description Adjusts the sharpness of image details Standard: adjusts the overall image sharpness Thin Line Enhancement: enhances fine details such as
  • Epson EB-PU1008W | Users Guide - Page 230
    Setting Image Enhancement Options 4K Enhancement Image Preset Mode Frame Interpolation Deinterlacing Noise Reduction MPEG Noise Reduction Super-resolution Detail Enhancement Reset Description Accepts 4K signals and enhances the output of 1080p signals Selects the image enhancement settings saved
  • Epson EB-PU1008W | Users Guide - Page 231
    Setting Advanced Dynamic Contrast Lights-Out Control Reset Options Scene Adaptive Gamma Gamma RGBCMY Dynamic Contrast Response Speed Black Level Lights-Out Control Lights-Out Signal Level Lights-Out Timer - Description Adjusts the gamma levels depending on the scene and can obtain a more vivid
  • Epson EB-PU1008W | Users Guide - Page 232
    settings for an input source, make sure the source is connected and select that source. Setting Resolution Options Auto Normal Wide Manual Description Sets the input signal resolution from an analog RGB computer connection Auto: detects the resolution automatically Normal: for 4:3 or 5:4 screens
  • Epson EB-PU1008W | Users Guide - Page 233
    Setting Aspect Tracking Sync. Position Auto Setup Overscan Color Space Options Description See the list of available aspect Sets the aspect ratio (width-to- ratios height ratio) for the selected input source Varying levels available Adjusts signal to eliminate vertical stripes in images from
  • Epson EB-PU1008W | Users Guide - Page 234
    Setting Dynamic Range Options Dynamic Range Signal Status HDR10 Setting HLG Setting Blanking Advanced Up, down, left, right Video Range EDID Scale Various scale options Reset - Parent topic: Adjusting the Menu Settings Related references Available Image Aspect Ratios 234 Description Sets
  • Epson EB-PU1008W | Users Guide - Page 235
    Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. 235
  • Epson EB-PU1008W | Users Guide - Page 236
    Quick Corner Curved Surface Corner Wall Point Correction Memory - Varying levels available Description Adjusts the projected image shape H/V Keystone: lets you manually correct the angles of the horizontal and vertical sides Quick Corner: select to adjust the position of the four corners Curved
  • Epson EB-PU1008W | Users Guide - Page 237
    Setting HDMI Link Options Device Connections HDMI Link Audio Out Device Power On Link Power Off Link Link Buffer Description Adjusts the HDMI Link options that allow the projector remote to control HDMI-connected devices Device Connections: lists the devices connected to the HDMI port HDMI Link:
  • Epson EB-PU1008W | Users Guide - Page 238
    Setting Lock Setting Options Control Panel Lock Lens Lock Description Controls projector button locking to secure the projector Control Panel Lock: • Full Lock: locks all buttons • Partial Lock: locks all buttons except the power button • Off: no buttons locked Lens Lock: locks the focus, zoom,
  • Epson EB-PU1008W | Users Guide - Page 239
    Setting Brightness Settings Remote Receiver Options Light Source Mode Brightness Level Constant Brightness Estimated Remains Front/Rear Front Rear Off Description Selects the brightness mode of the projector Light Source Mode: sets the brightness for the light source • Normal: maximum brightness •
  • Epson EB-PU1008W | Users Guide - Page 240
    Position: saves the position of the adjusted lens Geometry Correction: saves the geometry correction adjustments Plays back a playlist created in the Epson Projector Content Manager software Content Playback: turns Content Playback on or off Overlay Effect: adds color and effects to the projected
  • Epson EB-PU1008W | Users Guide - Page 241
    Setting Reset Options - Description Resets all the Settings menu settings to their defaults Parent topic: Adjusting the Menu Settings Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Setting Home
  • Epson EB-PU1008W | Users Guide - Page 242
    Setting Projection Operation A/V Settings Standby Mode Options Front Front/Ceiling Rear Rear Ceiling - A/V Output Communication On Communication Off Description Selects the way the projector faces the screen so the image is oriented correctly See the Operation settings table in this topic Select
  • Epson EB-PU1008W | Users Guide - Page 243
    Setting HDBaseT Color Calibration Options Control Communications Extron XTP Color Calibration Start Auto Adjustment Undo Redo Color Uniformity Reset Description Selects the communication settings for connections to an HDBaseT transmitter or switcher Control Communications: enables or disables
  • Epson EB-PU1008W | Users Guide - Page 244
    Setting Multi-Projection Options Projector ID Projector Grouping Tiling Geometry Correction Edge Blending Black Level Scale Reset Description Select various options when projecting from multiple projectors Projector ID: sets the projector to a particular ID number which allows you to use a remote
  • Epson EB-PU1008W | Users Guide - Page 245
    Setting Options Screen Matching Description Adjusts color and brightness settings for multiple projectors so they match better Start Auto Adjustment: starts auto adjustment for all projectors Undo: undo the auto adjustment Redo: restore the auto adjustment if you selected Undo Schedule Settings:
  • Epson EB-PU1008W | Users Guide - Page 246
    Setting Schedule Settings Language Reset Display settings Setting Menu Position Message Position Messages Display Background Startup Screen Standby Confirmation Air Filter Notice Options Simple Stacking Various scheduling options Various languages available - Description Creates a bright projected
  • Epson EB-PU1008W | Users Guide - Page 247
    Setting Screen Panel Alignment Color Uniformity OSD Rotation Operation settings Setting Direct Power On Sleep Mode Sleep Mode Timer High Altitude Mode Auto Source Search Auto Power On Startup Source Quick Startup USB Power Description Sets the aspect ratio and position of the projected image
  • Epson EB-PU1008W | Users Guide - Page 248
    Setting A/V Mute Settings Advanced Date & Time Lens Calibration Advanced settings Setting Beep Indicators Log Save Destination Batch Setup Range AC Voltage Monitoring Lens Type Description Adjusts the A/V Mute settings Fade-in: sets the number of seconds for a fade-in transition effect when
  • Epson EB-PU1008W | Users Guide - Page 249
    Parent topic: Adjusting the Menu Settings Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network. Setting Wireless Mode Options Wireless LAN On Off Description Enable or disable
  • Epson EB-PU1008W | Users Guide - Page 250
    IPv6 Address (Auto) Projector Name DHCP IP Address Subnet Mask Gateway Address MAC Address IPv6 Address (Manual) IPv6 Address (Auto) - Accesses additional network menus Description Displays wireless network status and details Displays wired network status and details Displays the QR Code Configures
  • Epson EB-PU1008W | Users Guide - Page 251
    Setting Remote Camera Access Options Remote Camera Access Password Description Displays the image taken by the optional external camera using Epson Web Control Remote Camera Access: select On to enable remote camera access Password: sets a password for accessing the projector over the Web Parent
  • Epson EB-PU1008W | Users Guide - Page 252
    technician Displays the color format of the current input source Displays information about projector problems that may be needed by a service technician Displays the projector's serial number Displays the model number of the installed lens Displays the Event ID number corresponding to a specific
  • Epson EB-PU1008W | Users Guide - Page 253
    If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the solution to the projector problem associated with the code. Event ID code 0432 0435 0434 0481 0482 0485 0433 Cause and solution Turn the projector off and then on again
  • Epson EB-PU1008W | Users Guide - Page 254
    security settings and make sure that the security certificate is installed correctly. The internal power supply that saves your clock settings is running low. Contact Epson for help. Parent topic: Projector Information Display - Info Menu 254
  • Epson EB-PU1008W | Users Guide - Page 255
    Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values and adjust other settings in the Reset menu. Setting Reset All Memories Refresh Mode Options - Timer Messages Start 255 Description Deletes all memories saved in Memory, Lens Position, and
  • Epson EB-PU1008W | Users Guide - Page 256
    Setting Light Source Calibration NFC Settings Reset All Config Options Run Now Run Periodically Schedule Settings Last Run NFC Write Protection NFC Write Password - Description Optimizes the color balance of the currently projected image Run Now: starts light source calibration for the projected
  • Epson EB-PU1008W | Users Guide - Page 257
    Setting Reset All (Factory Default) Options Reset All (User Default) Reset All (Factory Default) User Default Setting Password Setting Parent topic: Adjusting the Menu Settings Related tasks Running Light Source Calibration Description Resets projector settings to their factory defaults Reset All
  • Epson EB-PU1008W | Users Guide - Page 258
    Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and : Do not try to service this product yourself, except as specifically explained in this manual. Refer all other servicing to Epson qualified servicers. Cleaning the Lens Cleaning the
  • Epson EB-PU1008W | Users Guide - Page 259
    your projector and make regular maintenance simple. Filter maintenance intervals will depend on the environment. If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to
  • Epson EB-PU1008W | Users Guide - Page 260
    Parent topic: Projector Maintenance Related references Projector Light Status Cleaning the Air Filter You need to clean the projector's air filter in the following situations: • The filter or vents get dusty. • You see a message telling you to clean it. • The projector's Filter light is orange or
  • Epson EB-PU1008W | Users Guide - Page 261
    3. Pull the air filter out of the projector. 4. Tap each side of the air filter 4 to 5 times to shake off any excess dust. Caution: Do not use excessive force when tapping the air filter, or it may crack and become unusable. Do not rinse the air filter in water, or use any detergent or solvent to
  • Epson EB-PU1008W | Users Guide - Page 262
    canned air; the gases may leave a residue, or push dust and debris into the projector's optics or other sensitive areas. 5. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust. Note: If dust is difficult to remove or the air filter is damaged, replace the air
  • Epson EB-PU1008W | Users Guide - Page 263
    7. Place the air filter back in the projector as shown. 8. Replace the air filter cover and tighten the screws as shown. 263
  • Epson EB-PU1008W | Users Guide - Page 264
    Parent topic: Air Filter and Vent Maintenance Related references Projector Light Status Replacing the Air Filter You need to replace the air filter in the following situations: • After cleaning the air filter, you see a message telling you to clean or replace it • The air filter is torn or damaged
  • Epson EB-PU1008W | Users Guide - Page 265
    3. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations. 265
  • Epson EB-PU1008W | Users Guide - Page 266
    4. Place the new air filter in the projector as shown. 5. Replace the air filter cover and tighten the screws as shown. 266
  • Epson EB-PU1008W | Users Guide - Page 267
    AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. 1. Remove the battery cover as shown. 2. Remove the old batteries. Warning
  • Epson EB-PU1008W | Users Guide - Page 268
    3. Insert the batteries with the + and - ends facing as shown. Warning: Make sure the batteries are inserted in the correct positions. If the batteries are not inserted correctly, they could explode or leak, causing a fire, injury, or damage to the product. 4. Replace the battery cover and press it
  • Epson EB-PU1008W | Users Guide - Page 269
    its original packing materials, if possible, or use equivalent materials with cushioning around the projector. Mark the box "Fragile." Note: Epson shall not be liable for any damages incurred during transportation. Parent topic: Maintaining and Transporting the Projector Related topics Attaching and
  • Epson EB-PU1008W | Users Guide - Page 270
    indicate what the problem is. • The Help option on the Home screen can display information about common problems, if the projector is operating. • The solutions in this manual can help you solve many problems. If none of these solutions help, you can contact Epson for technical support. Parent topic
  • Epson EB-PU1008W | Users Guide - Page 271
    Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here. 1 On/Standby (power) light 2 Status light 3 Laser light 4
  • Epson EB-PU1008W | Users Guide - Page 272
    filter • Make sure the environmental temperature is not too hot Lens Shift error; turn off the projector, unplug it from the electrical outlet, and contact Epson for help No lens is installed Internal error; turn off the projector, unplug it from the electrical outlet, and contact
  • Epson EB-PU1008W | Users Guide - Page 273
    hot • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help Laser error; turn off the projector, unplug it, and contact Epson for help Low air flow through the projector • Make sure that the vents and air
  • Epson EB-PU1008W | Users Guide - Page 274
    is unable to maintain constant brightness and the Constant Brightness setting in the Settings menu is disabled Lens problem or no lens is installed • Remove and reattach the installed lens • Attach a supported lens • If the problem persists, unplug the projector and contact Epson for help 274
  • Epson EB-PU1008W | Users Guide - Page 275
    If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems Related concepts Air Filter and Vent Maintenance Related references Projector Reset Options - Reset Menu Projector Feature Settings - Settings
  • Epson EB-PU1008W | Users Guide - Page 276
    The Info menu appears: 3. Select Status Information and press Enter. You see a screen like this: 4. Press the left or right arrow buttons to view different categories of information. • Status Information: The projector's operating status • Source: Input signal information • Signal Information: Input
  • Epson EB-PU1008W | Users Guide - Page 277
    : Operating time for the projector and light source • Version: The projector's firmware version Projector Status Display Messages Parent topic: Solving Problems Projector Status Display Messages Categories on the status display screens let you view information about the projector and its operation
  • Epson EB-PU1008W | Users Guide - Page 278
    Information Source Resolution Color Space H-Frequency V-Frequency Sync Polarity Sync Mode Detected Mode Transport Video Range Signal Information category Information 5V Detect TMDS Clock H-Frequency V-Frequency Stable Time HDCP Status HDCP Ver AVI VIC Description Displays the source currently being
  • Epson EB-PU1008W | Users Guide - Page 279
    Information AVI Checksum AVI Sampling Str Signal Mode HDR Mode EDID Mode HDBaseT Level SDI Link Mode Sync Detect PayloadID Detect Resolution Refresh Rate Color Sampling Pixel Depth SDI Type 3G Mapping Level Color Space Network Wired category Information Projector Name Connection Mode DHCP IP Display
  • Epson EB-PU1008W | Users Guide - Page 280
    Information MAC Address Network Wireless category Information Projector Name Connection Mode SSID Display IP Display SSID IP Address DHCP MAC Address Security Antenna Level Maintenance category Information Operation Time Laser Op. Time Version category Information Serial No. Description Displays
  • Epson EB-PU1008W | Users Guide - Page 281
    Information Main Video2 Sub Sub2 HDMI HDMI2 HDBaseT System status information Status OK Warm-up Standby Cool Down Temp Error Fan Error Sensor Error Internal Error Airflow Error Temp Warning Airflow Decline Clean Filter Lens Shift Error Lens Error Laser Error Laser Warning Description Display the
  • Epson EB-PU1008W | Users Guide - Page 282
    Check the solutions in these sections if you have any problems with projected images or sound. Solutions When No Image Appears Solutions When "No Signal" Message Appears Solutions When "Not Supported" Message Appears Solutions When Only a Partial Image Appears Solutions When the Image is Not
  • Epson EB-PU1008W | Users Guide - Page 283
    if your connected computer is in sleep mode or displaying a blank screen saver. • Press the Menu button. If the projector menu displays, there may be a problem with the connected video source, cable connection, or port. • Check the settings on the Signal menu to make sure they are correct for the
  • Epson EB-PU1008W | Users Guide - Page 284
    Try a different video cable. • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu. press the key labeled with a monitor icon or CRT/LCD. (See your laptop manual for details.) Wait a few seconds for an image to appear. To display on
  • Epson EB-PU1008W | Users Guide - Page 285
    extended desktop mode is disabled. (See your computer or Windows manual for instructions.) 3. If necessary, check your video card settings and set Parent topic: Solving Image or Sound Problems Related references Input Signal Settings - Signal Menu Supported Video Display Formats Solutions When Only
  • Epson EB-PU1008W | Users Guide - Page 286
    set the resolution within the projector's limits. (See your computer manual for details.) • Check the resolution assigned to your presentation Problems Related concepts Projector Connections Related references Projector Setup Settings - Extended Menu Input Signal Settings - Signal Menu Supported
  • Epson EB-PU1008W | Users Guide - Page 287
    a computer, press the Auto button on the remote control to automatically adjust the tracking and sync. If the problem remains, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings. • If you adjusted the image shape using the projector controls, try
  • Epson EB-PU1008W | Users Guide - Page 288
    Quality Settings - Image Menu Supported Video Display Formats Solutions When remain, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings in the Signal menu. topic: Solving Image or Sound Problems Related concepts Projector Connections Related
  • Epson EB-PU1008W | Users Guide - Page 289
    balance and the brightness level of the projected image may differ between the projectors. Parent topic: Solving Image or Sound Problems Related references Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Projection Distance Solutions
  • Epson EB-PU1008W | Users Guide - Page 290
    15 to 43%. • If you see an error message during automatic adjustments, make a note of the error codes and contact Epson for support. Parent topic: Solving Image or Sound Problems Related references Optional Equipment and Replacement Parts Where to Get Help (U.S. and Canada) Where to Get Help (Latin
  • Epson EB-PU1008W | Users Guide - Page 291
    size. • If you see an error message during simple stacking, make a note of the error codes and contact Epson for support. Parent topic: Solving Image or Sound Problems Related references Optional Equipment and Replacement Parts Where to Get Help (U.S. and Canada) Where to Get Help (Latin America
  • Epson EB-PU1008W | Users Guide - Page 292
    from an HDMI source, make sure your Mac supports audio through the HDMI port. If not, computer's volume and decrease the projector's volume (when using Epson iProjection [Windows/Mac]). • If you turn the projector topic: Solving Image or Sound Problems Related concepts Projector Connections Related
  • Epson EB-PU1008W | Users Guide - Page 293
    may be defective. Try another power cord. If that doesn't work, disconnect the cord and contact Epson. Parent topic: Solving Projector or Remote Control Operation Problems Related references Projector Setup Settings - Extended Menu Projector Feature Settings - Settings Menu Projector Light Status
  • Epson EB-PU1008W | Users Guide - Page 294
    cable set. • If you lose the remote control, you can purchase another from an authorized Epson reseller. Parent topic: Solving Projector or Remote Control Operation Problems Related concepts Projector Identification System for Multiple Projector Control Related references Projector Feature Settings
  • Epson EB-PU1008W | Users Guide - Page 295
    Solutions When a Battery Message Appears If you see a message telling you that the battery that saves your clock settings is running low, contact Epson for help. Parent topic: Solving Problems Related references Where to Get Help (U.S. and Canada) Where to Get Help (Latin America) Solving Network
  • Epson EB-PU1008W | Users Guide - Page 296
    If your Web browser is set up to connect via a proxy server, the Epson Web Control screen cannot be displayed. Make settings for a connection without using a Connection Mode setting set to Advanced. • If you have problems while controlling the projector with command communication using ESC/VP.net
  • Epson EB-PU1008W | Users Guide - Page 297
    , reduce the number of connected devices. Parent topic: Solving Network Problems Solutions When Network Alert E-Mails are Not Received If you do not receive an e-mail alerting you to problems with a projector over the network, try the following solutions: • Make
  • Epson EB-PU1008W | Users Guide - Page 298
    select your product for solutions to common problems with your projector. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661. This
  • Epson EB-PU1008W | Users Guide - Page 299
    Epson for technical support services, use the following support options. Internet Support Visit Epson's support website at latin.epson.com/support and select your product for solutions to common problems with your projector. You can download utilities and documentation, get FAQs and troubleshooting
  • Epson EB-PU1008W | Users Guide - Page 300
    Then call: Country Argentina Bolivia* Brazil Chile Colombia Costa Rica Dominican Republic* Ecuador* El Salvador* Guatemala* Mexico Nicaragua* Panama* Paraguay Peru Uruguay Venezuela Telephone (54 11) 5167-0300 0800-288-37766 800-100-116 0800-007-5000 (56 2) 2484-3400 Bogota: (57 1) 592-2200 Other
  • Epson EB-PU1008W | Users Guide - Page 301
    Purchase Supplies and Accessories You can purchase optional accessories and replacement parts from an Epson authorized reseller. To find the nearest reseller, go to latin.epson.com. Or you can contact your nearest sales office as described in "Where to Get Help." Parent topic: Solving Problems 301
  • Epson EB-PU1008W | Users Guide - Page 302
    Safety and Approvals Specifications Supported Video Display Formats General Projector Specifications Note: Specifications are based on having the standard zoom lens installed: ELPLM08 for EBPU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EB-PU1008W and ELPLM15 for EBPU2010B/EB-PU2010W. The lens is
  • Epson EB-PU1008W | Users Guide - Page 303
    (ISO 21118 standard) Color light output 5950 lumens Quiet or Extended Light Source Mode: White light output 4900 lumens (ISO 21118 standard) EB-PU1008B/EB-PU1008W: Normal Light Source Mode: White light output 8500 lumens (ISO 21118 standard) Color light output 8500 lumens Medium Light Source Mode
  • Epson EB-PU1008W | Users Guide - Page 304
    21118. Over 2,500,000:1 with Dynamic Contrast on EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EBPU1008W: 50 inches (1.27 m) to 371 inches (9.4 m) EB-PU2010B/EB-PU2010W: 60 inches (1.5 m) to 371 inches (9.4 m) EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EBPU1008W: 60 inches (1.5 m) to 736 inches (18
  • Epson EB-PU1008W | Users Guide - Page 305
    (Medium Light Source Mode) 30 dB (Quiet Light Source Mode) Keystone correction angle EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EBPU1008W: ± 67° vertical (Tele Zoom) ± 30° horizontal (Tele Zoom) EB-PU2010B/EB-PU2010W: ± 60° vertical (Tele Zoom) ± 18° horizontal (Tele Zoom) USB Type B port
  • Epson EB-PU1008W | Users Guide - Page 306
    The lens is not included with the projector. Type Light source output power Wavelength Light source life Laser Diode EB-PU1006W: Up to 115.5 W EB-PU1007B/EB-PU1007W: Up to 132 W EB-PU1008B/EB-PU1008W/EB-PU2010B/EB-PU2010W: Up to 176 W 449 to 461 nm Normal, Medium, or Quiet Light Source Mode: Up to
  • Epson EB-PU1008W | Users Guide - Page 307
    Projector Electrical Specifications Note: Specifications are based on having the standard zoom lens installed: ELPLM08 for EBPU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EB-PU1008W and ELPLM15 for EBPU2010B/EB-PU2010W. The lens is not included with the projector. Rated frequency Power supply 50/60 Hz
  • Epson EB-PU1008W | Users Guide - Page 308
    : Normal Light Source Mode: 448 W Medium/Quiet/Extended Light Source Mode: 379 W Standby: 0.5 W (Communication Off), 2.0 W (Communication On) EB-PU1008B/EB-PU1008W/EB-PU2010B/EB-PU2010W: Normal Light Source Mode: 559 W Medium/Quiet/Extended Light Source Mode: 469 W Standby: 0.5 W (Communication Off
  • Epson EB-PU1008W | Users Guide - Page 309
    -PU2010W. The lens is not included with the projector. Temperature Humidity (relative, noncondensing) Operating altitude Operating: EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EBPU1008W: Up to 7500 feet (2286 m): 32 to 113 °F (0 to 45 °C) 7500 to 10000 feet (2286 to 3048 m) with High Altitude Mode
  • Epson EB-PU1008W | Users Guide - Page 310
    Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically. Your computer's monitor port or video card refresh rate (vertical frequency) must be compatible with the projector. (See your computer or video card manual
  • Epson EB-PU1008W | Users Guide - Page 311
    /30/50/60 4K input signals 3840 × 2160 24/25/30/50/60 4096 × 2160 (SMPTE) 24/25/30/50/60 SDI input signals (EB-PU2010B/EB-PU2010W only) SD-SDI (NTSC) 60 SD-SDI (PAL) 50 HD-SDI 50/60 HD-SDI 24/25/30/50/60 3G-SDI 50/60
  • Epson EB-PU1008W | Users Guide - Page 312
    Important Safety Information Important Safety Instructions List of Safety Symbols Waiver Trademarks Copyright Notice Recycling (U.S. and Canada) Epson offers a recycling program for end of life Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel
  • Epson EB-PU1008W | Users Guide - Page 313
    use with this projector. • Failure to install the ceiling mount and projector may cause the projector to fall. After installing the specific Epson mount that supports your projector, make sure you secure the mount to all of the projector's ceiling mount fixing points. Also, secure the projector and
  • Epson EB-PU1008W | Users Guide - Page 314
    Except as specifically explained in this manual, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or servicing to qualified service personnel under the following conditions: if it does not operate normally when you follow the operating instructions,
  • Epson EB-PU1008W | Users Guide - Page 315
    • Do not stand on the projector or place heavy objects on it. • Do not use the projector outside of the required temperature range below: EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EB-PU1008W: 32 to 113 °F (0 to 45 °C) at an altitude of 7500 feet (2286 m) or less, or 32 to 104 °F (0 to 40 °C) at an
  • Epson EB-PU1008W | Users Guide - Page 316
    IEC/EN60825-1:2014 international standard for lasers. Follow these safety instructions when using the projector. Warning: Possibly hazardous optical radiation result in an electric shock, fire, or visual impairment. Contact Epson support. • Do not attempt to disassemble or modify the projector. The
  • Epson EB-PU1008W | Users Guide - Page 317
    a Risk Group 2 LIP as defined in IEC 62471-5: Ed. 1.0 (for more information see Laser Notice No. 57, dated May 8, 2019): • Inside Parent topic: Important Safety Instructions 317
  • Epson EB-PU1008W | Users Guide - Page 318
    -5 standard. Looking into the lens at distances closer than those indicated here can cause damage to eyesight. EB-PU1006W/EB-PU1007B/EB-PU1007W/EB-PU1008B/EB-PU1008W Exposure Hazard Value (EHV) Lens Wide ELPLX01 3.1 inches (0.08 m) ELPLX02 - ELPLU04 9.1 inches (0.23 m) ELPLU06 6.3 inches
  • Epson EB-PU1008W | Users Guide - Page 319
    related to direct medical care, please make your own judgment on this product's suitability after a full evaluation. Parent topic: Important Safety Instructions List of Safety Symbols (corresponding to IEC60950-1 A2) The following table lists the meaning of the safety symbols labeled on the
  • Epson EB-PU1008W | Users Guide - Page 320
    No. Symbol 1 2 3 4 5 6 7 Approved Standards IEC60417 No.5007 Description "ON" (power) To indicate connection to the mains. IEC60417 No.5008 IEC60417 No.5009 ISO7000 No.0434B, IEC3864-B3.1 IEC60417 No.5041 IEC60417 No.6042 ISO3864-B3.6 IEC60417 No.5957 "OFF" (power) To indicate disconnection from
  • Epson EB-PU1008W | Users Guide - Page 321
    No. Symbol 8 9 10 11 12 13 14 Approved Standards IEC60417 No.5926 - IEC60417 No.5001B IEC60417 No.5002 - IEC60417 No.5019 IEC60417 No.5017 Description Polarity of DC power connector To identify the positive and negative connections (the polarity) on a piece of equipment to which a DC power supply
  • Epson EB-PU1008W | Users Guide - Page 322
    No. Symbol 15 16 17 18 19 20 21 22 Approved Standards IEC60417 No.5032 IEC60417 No.5031 IEC60417 No.5172 ISO 3864 ISO 3864 - Description Alternating current To indicate on the rating plate that the equipment is suitable for alternating current only; to identify relevant terminals. Direct current
  • Epson EB-PU1008W | Users Guide - Page 323
    No. Symbol 23 24 25 26 27 28 29 30 Parent topic: Notices Approved Standards ISO 3864 IEC60417 No. 5266 ISO3864 IEC60417 No. 5057 IEC 60417 No. 6056 IEC 60417 No. 6043 - ISO7010 No. W027 ISO3864 IEC60417 No. 5109 Description Disassembly prohibition To indicate a risk of injury, such as electric
  • Epson EB-PU1008W | Users Guide - Page 324
    . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Epson EB-PU1008W | Users Guide - Page 325
    of action is for an IP Claim. 1.2 Binding Arbitration. You and Epson agree that all Disputes shall be resolved by binding arbitration according to this if your address changes by emailing us at [email protected] or writing us at the Epson Address above. Notice of the Dispute shall include the
  • Epson EB-PU1008W | Users Guide - Page 326
    MORE THAN ONE PARTY'S CLAIMS WITHOUT THE WRITTEN CONSENT OF ALL AFFECTED PARTIES TO AN ARBITRATION PROCEEDING. 1.6 Arbitration Procedure. If you or Epson commences arbitration, the arbitration shall be governed by the rules of JAMS that are in effect when the arbitration is filed, excluding any
  • Epson EB-PU1008W | Users Guide - Page 327
    of your assent to this Agreement (including without limitation the purchase, download, installation of the Software or other applicable use of Epson Hardware, products and services) that specifies (i) your name, (ii) your mailing address, and (iii) your request to be excluded from the final, binding
  • Epson EB-PU1008W | Users Guide - Page 328
    Corporation. PrivateLine® is a registered trademark; SizeWiseTM is a trademark; and Extra CareSM is a service mark of Epson America, Inc. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. Mac and OS X are trademarks of Apple Inc.,
  • Epson EB-PU1008W | Users Guide - Page 329
    or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
EB-PU1006W/EB-PU1007B/EB-
PU1007W/EB-PU1008B/EB-
PU1008W/EB-PU2010B/EB-PU2010W
User's Guide