Epson EMP-5500 Owners Manual - Page 45
Turning the Equipment On and Off
View all Epson EMP-5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Turning the Equipment On and Off Turn on the projector and its attached equipment in the following order. 1. Video source 2. Audio source (if different from computer or video source) 3. Projector 4. External speaker or PA system 5. Computer When you turn off the equipment, do so in the reverse order. Turning the Projector On and Off 1. Remove the projector lens cap. 2. Press the Power button on the remote control or operation panel. The power indicator flashes as the projector warms up. When the projector is fully warmed up, this light remains green. If computer or video equipment is attached, the computer or video signal is projected. Allow about 30 seconds for full illumination. ♦ Warning: Never look into the lens when the lamp is on. This can damage your eyes. It is especially important that children are not allowed to look into the lens. ♦ Caution: When turning the projector on or off with the remote control, be sure to turn the remote control on first with the power switch. s s s s s s Turning the Equipment On and Off 23