Home » Epson Manuals » Laser Printers » Epson EPL-6000 » Manual Viewer

Epson EPL-6000 Product Support Bulletin(s)

Epson EPL-6000 Manual

View all Epson EPL-6000 manuals

Add to My Manuals
Save this manual to your list of manuals

Epson EPL-6000 manual content summary:

Epson EPL-6000 | Product Support Bulletin(s) - Page 1
EPSON AMERICA, INC. EPSON Product Support Bulletin Subject: Laser & Non-Impact Printer Error Codes Date: 4/3/91 Page(s): 1 of 11 PSB No: P-0077 Originator: JV Epson printers issue beep tones and/or displays error codes when certain error conditions exist. Those beeps or codes can assist you in
Epson EPL-6000 | Product Support Bulletin(s) - Page 2
the Form Feed button EPL=6000/ActionLaser/ActionLaser+ LCD Codes CHANGE DRUM The drum needs to be changed. The drum cartridge may not be installed, the cartridge may not be installed properly or the cartridge may be defective. COVER OPEN Printer cover is open CPU ERROR Printer's CPU has made
Epson EPL-6000 | Product Support Bulletin(s) - Page 3
EPL-6000 cont. ERROR 33 Thermistor error ERROR 40 Parity / Framing error FONT CARD ERROR Font cartridge PAPER JAM Paper is jammed inside the printer PAPER SIZE ERROR Paper setting does some errors may clear automatically even though the problem remains. Status messages are preceded by [S],
Epson EPL-6000 | Product Support Bulletin(s) - Page 4
PSB No: P-0077 Page: 4 of 11 EPL-7000 cont. [S] COPY END X/X Multiple-copy printing is cancelled (you pressed the COPY END button when the printer was off line). [E] COVER OPEN The printer cover is open or the imaging cartridge is not installed. [S] DATA The printer has received data but is not yet
Epson EPL-6000 | Product Support Bulletin(s) - Page 5
during a multi-copy print operation. [S] RAM Check X.X MB The printer is checking RAM (X.X = capacity). [S] READY The printer is ready to print. [E] REINSERT CARD lf this message appears on the display, you may have removed a font card or cartridge while the FEED light was still lit or while the
Epson EPL-6000 | Product Support Bulletin(s) - Page 6
PSB No: P-0077 Page: 6 of 11 EPL-7000 cont. [E] REMOVE CARD You may have inserted a font card or cartridge while the printer was on line or while the FEED light was on. Data still remains in the printer's buffer. [E] RESELECT TRAY The optional lower paper cassette is not installed and the INPUT
Epson EPL-6000 | Product Support Bulletin(s) - Page 7
is being reset after a START UP ERROR. [S] WARMING UP Printer is warming up. EPL-7500 [E] COVER OPEN Cover is open or the imaging cartridge is not installed. [E] MANUAL FEED Manual feed method is selected. [S] OFF LINE Printer is Off tine [E] OUT OF PAPER No paper cassette is installed, the paper
Epson EPL-6000 | Product Support Bulletin(s) - Page 8
is flushing a job from the buffer. [S] READY The printer is ready to receive data. [S] RESETTING This message appears initially when the printer is turned on, and momentarily between print jobs. [E] TONER LOW The imaging cartridge must be replaced. [S] WAIT- FOR READY The On-tine button was pressed
Epson EPL-6000 | Product Support Bulletin(s) - Page 9
P-0077 Page: 9 of 11 EPL-7000 cont. [S] WARMING UP The printer is warming up. Note: lf any of the following messages appear, turn the printer off for at least five seconds, do Cover Open error EO-00 Engine driver CPU error. EO-01 Option tray CPU error. EO4+02 Option tray motor error.
Epson EPL-6000 | Product Support Bulletin(s) - Page 10
0077 Page: 10 of 11 Optical unit error. Main motor error. Fusing unit error. Exception error. Trap error. Bus error. Address error. Illegal Instruction. NMI error. Reverse vector interrupt error. User vector interrupt error. System RAM error. External RAM error. CG ROM error. Paper feed error. Paper
Epson EPL-6000 | Product Support Bulletin(s) - Page 11
GQ-3500 cont. U1 U2 PSB No: P-0077 Page: 11 of 11 Replace the collector unit and lens shield. Replace the drum cartridge and lens shield.
Epson EPL-6000 | Product Support Bulletin(s) - Page 12
Product Support Bulletin Subject: EPL-6000/ActionLaser Paper Jams Date: 4/3/91 Page(s): 1 of 2 PSB No: P-0074 Originator JV This bulletin is to help eliminate the accidental breaking of the Transfer Corona Wire due to paper jams. The figure below shows the path the paper takes through the printer
Epson EPL-6000 | Product Support Bulletin(s) - Page 13
must remove the processing tray (which includes the Developer Unit and the Drum Unit). Do not remove the jammed paper by pulling the paper to printer. Replace the processing tray and close the printer cover. Breakage of the Transfer Charger wire will cause a change in the print quality. The toner
Epson EPL-6000 | Product Support Bulletin(s) - Page 14
INFORMATION Product Support Bulletin Subject: Power Specifications Date: 2/7/90 Page: 1 of 2 PSB No: P-0060 Originator: RFB The following information is a list of the power requirements for the Epson 9 and 24 pin printers and laser printers. 504 VA maximum
Epson EPL-6000 | Product Support Bulletin(s) - Page 15
286.69 409.56 120V .7 Amp 84 VA maximum 286.69 If the power requirements of a particular Epson printer is not listed please refer to the appropriate User's Manual for the electrical specifications. In the event that the User's Manual is not available, locate the silver label on the back of the
Epson EPL-6000 | Product Support Bulletin(s) - Page 16
emulation is available for the EPL- 6000 through the use of an optional FX Identity Cartridge, the p/n for the cartridge is IBS100. Q3. What printer driver selection should I choose in my software programs when using the EPL- 6000? A. The proper printer driver selections are listed below from
Epson EPL-6000 | Product Support Bulletin(s) - Page 17
EPL- 6000? A. The EPL- 6000 provides (3) three built - in SELF-TESTS. In order to activate any of the built- in SELF -TESTS the printer must be set to "OFF - LINE". Listed below are the keystrokes necessary to press to initiate the SELF- TESTS. 1. SELF TEST - Press the "SPECIAL" and "MANUAL
Epson EPL-6000 | Product Support Bulletin(s) - Page 18
HP's LaserJet Series II Technical Reference Manual is: 33440- 90905. Q11. Why does the EPL- 6000 beep and display "ERROR 20" several times when I attempt to use downloaded (soft) fonts? A. An "ERROR 20" message indicates you have exceeded the printer's available user memory. A solution to this
Epson EPL-6000 | Product Support Bulletin(s) - Page 19
by TEC (Tokyo Electric co., LTD.). Is it possible to select Landscape printing on the EPL- 6000 by using the printer's SelecType feature? Yes, if a landscape font is selected, the EPL- 6000 will automatically default to landscape mode. SelecType allows a font to be selected via a font number
Epson EPL-6000 | Product Support Bulletin(s) - Page 20
cartridge or downloaded font that contains italic characters must be used. What are the part numbers for the EPL- 6000 options and supplies? Listed below are the part numbers for the EPL- 6000 options and supplies. FX Identity Cartridge #IBS100 Replacement Toner Cartridge #IBS300 Drum Unit