Epson ET-2500 User Manual

Start Here

Read these instructions before using your product.

Note for Spanish speakers/Nota para hispanohablantes:

Para

obtener instrucciones de configuración en español, consulte la

Guía de

instalación

en

epson.com/support/et2500sp

(requiere una conexión a

Internet).

1

Unpack

Note:

Do not open the ink bottles until you are ready to fill the ink

tanks. The ink bottles are vacuum packed to maintain reliability.

1

Remove all protective materials from the product.

2

Lift up the scanner unit and remove all protective materials

from inside the product.

Caution:

Do not touch the flat white cable or the ink tubes and

their translucent cover.

3

Lower the scanner unit.

2

Fill ink tanks

Note:

This product requires careful handling of ink. Wear disposable

gloves and place a sheet of paper under the ink tank unit when you

fill or refill the ink tanks, as ink may splatter. If ink spills, wipe it off

immediately with a damp towel to avoid permanent stains. If ink gets on

your clothes or belongings, it may not come off.

Warning:

Keep the ink bottles out of the reach of children and do not

drink the ink.

1

Open the ink tank unit cover, then remove the cap for the

cyan ink tank and attach it to its holder.

2

Unpack the cyan ink bottle.

3

Snap the bottle tip off, then remove the bottle cap.

Carefully remove the protective seal (avoid touching the ink

underneath the seal), then close the bottle cap tightly.

Caution:

Be sure to close the bottle cap tightly, or ink may leak.

4

Fill the tank using all of the ink in the bottle.

Note:

Refer to the color coded sticker above the ink tank unit to

identify the color of each tank.

Caution:

Be sure to fill each tank with the correct ink color.

ET-2500