Epson ET-2850U for ReadyPrint Start Here - Installation Guide
Epson ET-2850U for ReadyPrint Manual
 |
View all Epson ET-2850U for ReadyPrint manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson ET-2850U for ReadyPrint manual content summary:
- Epson ET-2850U for ReadyPrint | Start Here - Installation Guide - Page 1
make sure you read these instructions and the safety instructions in the online User's Guide. Note: As part of instructions to set up your product. For information on connecting your product to a computer, using voice-activated printing, or solving problems, or for details on reaching Epson support - Epson ET-2850U for ReadyPrint | Start Here - Installation Guide - Page 2
and hold the help button for 5 seconds. 13 Follow the on-screen instructions to start ink charging. Ink charging takes about 10 minutes. Note: When the off the ink tanks with any remaining ink. See the online User's Guide for instructions. Caution: Do not unplug or turn off the product, or raise - Epson ET-2850U for ReadyPrint | Start Here - Installation Guide - Page 3
's software package: http://epson.com/support/et2850u 3 Follow the instructions on the computer screen to run the paper is under the mark inside the edge guides. 4 Slide the edge guide against the paper, but not too tightly. Then Print Service app from Google Play™. 6 Select the paper - Epson ET-2850U for ReadyPrint | Start Here - Installation Guide - Page 4
network problems and solutions. See your online User's Guide for instructions. There support." Videos Visit http://epson.com/support/et2850uvideos to view support videos. ReadyPrint subscription program technical support Visit http://epson.com/support/et2850u to download drivers, view manuals
-
1 -
2 -
3 -
4
 |
 |
IMPORTANT:
Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s
Guide
.
Note:
As part of the ReadyPrint™ program, Epson monitors ink usage
remotely to provide you with additional ink before you run out of it. The
product must be connected to the Internet to function and monitor ink
usage.
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
Caution:
Do not touch the flat white cable or the ink tubes and
their translucent cover.
2
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Choose a setup method
The Epson Smart Panel
®
app can help you set up your printer
through an interactive, step-by-step process using your
smartphone or tablet.
If you do not want to
use a mobile device for
setup, skip to the “Fill ink
tanks” section below.
To use your mobile device
for setup, continue to
step 1.
or
1
Download the Epson Smart Panel app
from your device’s app store. Do not
launch the app yet.
2
Press the
power button to turn on the product.
Note:
Do not connect your product to your computer yet.
3
Launch the app and follow its instructions to set up your
product.
For information on connecting your product to a computer, using
voice-activated printing, or solving problems, or for details on
reaching Epson support, see the sections on the back of this
sheet.
3
Fill ink tanks
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
Caution:
This product requires careful handling of ink. If ink spills, wipe
it off immediately with a damp towel to avoid permanent stains. If ink gets
on your clothes or belongings, it may not come off.
Note:
•
Use only Epson
®
570 ink provided to you under the ReadyPrint
program.
•
Use the ink bottles included with the printer to set up the product. Part
of the ink will be used to charge the print head. These bottles may print
fewer pages compared with replacement ink bottles.
1
With the scanner unit raised, open the ink tank cover, then
open the cap for the black (BK) ink tank.
Note:
Refer to the color-coded sticker to identify the color of each
tank.
ET-2850U
Start Here