Epson EX3220 Quick Setup and Warranty
Epson EX3220 Manual
View all Epson EX3220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson EX3220 manual content summary:
- Epson EX3220 | Quick Setup and Warranty - Page 1
EX5220/EX6220/EX7220 Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Camera, USB device, or Epson DC-06 document camera Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06 document camera to the projector's USB - Epson EX3220 | Quick Setup and Warranty - Page 2
the on-screen instructions to install the driver, then run your presentation. For details, see the online User's Guide. • If you're not using the key, continue with the steps below. 4 Attach the wireless LAN module cover and secure it using the screw you removed. Turn projector on and off Choose - Epson EX3220 | Quick Setup and Warranty - Page 3
hours of support are subject to change without notice. Toll or long distance charges may apply. Internet support Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or - Epson EX3220 | Quick Setup and Warranty - Page 4
exceed the original retail selling price of the covered product. Exchange or replacement products or parts assume the remaining warranty period of the product covered by this limited warranty. If Epson replaces the lamp as part of the warranty service, the replacement lamp carries the limited 90-day
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide
for details.
Computer
USB cable
HDMI cable
VGA cable
Audio cable
USB port
Connect the square end of a USB cable to the projector’s
USB-B
(square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows
®
XP or later:
After turning on the projector, follow the
on-screen instructions to install the Epson
®
USB Display software
(
EMP_UDSE.EXE
; only on first connection). If the software screen does not
display automatically, open
My Computer
or
Computer
, then double-click
EPSON_PJ_UD
.
Mac OS X 10.5.8 or higher:
After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Note:
If you have problems installing the USB Display software, make sure the
USB Type B
setting in the projector’s
Extended
menu is set to
USB Display
.
See the online
User’s Guide
for instructions.
VGA port
Connect one end of a VGA cable to the projector’s
Computer
port, and the
other end to your computer’s
monitor port. If you are using a laptop,
switch it to external display (see “Troubleshooting”). You can also connect an
audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s
HDMI
port and the other
end to an HDMI port on your computer.
Video device
Connect up to 4 video devices and use the remote control to switch between
them.
RCA video cable (composite video)
Component video to VGA cable
S-Video cable
HDMI cable
Audio cable
Camera, USB device, or Epson DC-06 document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06
document camera to the projector’s
USB-A
(flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. See the online
User’s Guide
for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The
power
light on the projector turns blue.
3
Open the
A/V Mute
slide all the way.
4
Press the
power button.
The projector beeps, the
Status
light flashes blue, and then
stays on.
Note:
To shut down the projector, press the
power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
5
The default language of the menu system is
English
. To select another
language, press the
Menu
button on the projector. Select
Extended
and
press
Enter
. Select
Language
and press
Enter
. Select your language and
press
Enter
.
Press the
Menu
button to exit the menu system.
Adjust the image
1
If you don’t see an image, press the
Source Search
button on the
projector or remote control to select the image source.
Note:
If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the
foot release button and lift
the front of the projector.
Release the button to lock
the foot in position.
EX3220/EX5220/EX6220/EX7220