Epson J2100 User Manual

Epson J2100 - TM Color Inkjet Printer Manual

Get Epson J2100 - TM Color Inkjet Printer PDF manuals and user guides View all Epson J2100 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson J2100 manual content summary:

  • Epson J2100 | User Manual - Page 1
    TM-J2000/J2100 User's Manual / Bedienungsanleitung Gebruikershandleiding / Manuel d'utilisation Manual do utilizador / Manual del usuario Manuale dell'utente 401303603
  • Epson J2100 | User Manual - Page 2
    Part Names cutter cover 1 emergency cutter 2 control panel 3 ink cartridge cover 4 6 paper roll cover 5 power supply switch DIP Switch Tables Serial SW Function ON OFF 1-1 Power button function Disabled Enabled 1-2 Interface condition selection by the DIP by the switch memory switch
  • Epson J2100 | User Manual - Page 3
    : The contents of this manual are subject to change without notice. Copyright © 2000 by Seiko Epson Corporation, Nagano, Japan. EMC and Safety Standards Applied Product Name: TM-J2000/TM-J2100 Model Name: M158A The following standards are applied only to the printers that are so labeled. (EMC
  • Epson J2100 | User Manual - Page 4
    use may lead to fire. Immediately unplug the equipment and contact your dealer or a SEIKO EPSON service center for advice. Never attempt to repair this product yourself. Improper repair work can be dangerous Cartridge Keep the ink cartridge out of the reach of children. 2 TM-J2000/J2100 User's Manual
  • Epson J2100 | User Manual - Page 5
    America, go to the following web site: http://www.epsonexpert.com/ and follow the on-screen instructions. For customers in other countries, go to the following web site: http://www.epson-pos.com/ Select the product name from the "Select any product" pulldown menu. TM-J2000/J2100 User's Manual 3
  • Epson J2100 | User Manual - Page 6
    or uneven and the INK OUT LED is not on or flashing, use this button to clean the print head. Press the button until the printer mechanism begins to clean the print head (more than 3 seconds). When the cleaning stops, the printer is ready for normal printing. 4 TM-J2000/J2100 User's Manual
  • Epson J2100 | User Manual - Page 7
    power switch on the printer. Installing or Replacing a Paper Roll CAUTION: Be sure to use roll paper that meets the specifications. Do not touch the autocutter blade, which is on the exit part of the paper roll cover. Follow these steps: 1. Make sure the printer is on. TM-J2000/J2100 User's Manual 5
  • Epson J2100 | User Manual - Page 8
    3. Remove the used paper roll core if there is one. 4. Put the paper roll inside the printer in the correct direction, as shown in the illustrations below. 5. Pull the leading edge of the not to catch your finger in the printer when you close the paper roll cover. 6 TM-J2000/J2100 User's Manual
  • Epson J2100 | User Manual - Page 9
    close the cover correctly, you will feel it fit into place, and the printer will automatically feed approximately 7 cm {2.76 in.} of roll paper. approximately 7 and you must change the cartridge. (TM-J2100 users be sure to see the important information section below.) TM-J2000/J2100 User's Manual 7
  • Epson J2100 | User Manual - Page 10
    Epson specified ink cartridges. Performance of the printer when other ink cartridges are used is not guaranteed. Follow these steps to install an ink cartridge for the first time or to replace an empty ink cartridge. 1. Make sure the printer as far as it will go. 8 TM-J2000/J2100 User's Manual
  • Epson J2100 | User Manual - Page 11
    cartridge. When the POWER LED quits flashing and stays on, the printer is ready for printing. Important Ink Cartridge Information for the TM-J2100 The TM-J2100 has a two part cartridge, with black ink in one side : If both LEDs are flashing, replace the whole cartridge. TM-J2000/J2100 User's Manual 9
  • Epson J2100 | User Manual - Page 12
    , contact your supervisor or a qualified service person. The autocutter is jammed or the paper roll cover will not open Turn off the printer and remove the cutter cover. Remove the plate inside the cutter cover. Turn the knob until you see a triangle in the opening. 10 TM-J2000/J2100 User's Manual
  • Epson J2100 | User Manual - Page 13
    rubber feet or other such supports on its bottom surface, the feet must not rest on the limited area. ❏ If the object has a perfectly flat bottom surface, the bottom surface must extend beyond the edges of the limited area, as shown in the illustration. limited area TM-J2000/J2100 User's Manual 11
  • Epson J2100 | User Manual - Page 14
    (lps) (mm/s) (mm/s) dpi: dots per 25.4 mm (dots per inch) lps: lines per second lpi: lines per 25.4 mm (lines per inch) 57.5 {2.3"} 7.9 11.5 33.6 {1.3"} 11.9 17.0 50.3 {2.0"} 11.9 .5 {3.3"} 6.2 9.1 26.3 {1.0"} 9.8 14.2 41.6 {1.6"} 9.8 14.2 41.6 {1.6"} 14.4 {0.57"} 12 TM-J2000/J2100 User's Manual
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
TM-J2000/J2100
User’s Manual / Bedienungsanleitung
Gebruikershandleiding / Manuel d’utilisation
Manual do utilizador / Manual del usuario
Manuale dell’utente
401303603