Epson LQ-1000 Product Support Bulletin(s)
Epson LQ-1000 - Impact Printer Manual
 |
View all Epson LQ-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson LQ-1000 manual content summary:
- Epson LQ-1000 | Product Support Bulletin(s) - Page 1
3 beeps: Paper End detected 5 beeps: Abnormal carriage movement On-Line light is flashing: Printhead is over heated. Carriage will stop until the printhead cools down. LQ-500, LQ-510, LQ-1010, LQ-850, LQ-950, LQ-1050, L1000, AP-4000, AP-4500 1 beep: BEL code (.5 set beep) 1 beep: A Control - Epson LQ-1000 | Product Support Bulletin(s) - Page 2
LQ-800, LQ-1000, L750 1 beep: 1 beep: 3 beeps: 5 beeps: 5 beeps: LQ-860 1 beep: 1 beep: 3 beeps: 5 beeps: 5 beeps: 5 beeps: LQ-1500 1 beep: 5 beeps: 5 beeps: PSB No: P-0076 Page: 2 of 4 BEL code A Control Panel setting is accepted Paper End detected Abnormal carriage movement (.5 sec. pause between - Epson LQ-1000 | Product Support Bulletin(s) - Page 3
PSB No: P-0076 Page: 3 of 4 LQ-2500 NOTE: Printers with LCD displays use error messages along with beeps to inform the user of problems. The following messages will help you to troubleshoot problems. A blank LCD screen with the Power-on LED lit can be caused by a bent pin on one of the PROMS or - Epson LQ-1000 | Product Support Bulletin(s) - Page 4
paper and turning the printer back on. Both features were added to ensure proper paper handling and prevent paper jams, which can result in printhead failures. Incorrect jumper settings on the ROMA board may cause errors 10 or 20. The correct settings are documented in the Service Manual (page A-54 - Epson LQ-1000 | Product Support Bulletin(s) - Page 5
LQ-1000, LQ-1050 LQ-2500 (BLACK) LQ-2500 (COLOR) ALL 80-COLUMN MX, RX, FX, FX-86e, LX-800, JX-80* LQ-1500 ALL 136-COLUMN MX, RX, FX, FX286e JX-80 (COLOR) P-80 LX-80, LX-86, LX-90, HW-10 EX-800/1000 (BLACK) EX-800/1000 (COLOR) *Recommended for use when color is not required. EPSON AMERICA SERVICE - Epson LQ-1000 | Product Support Bulletin(s) - Page 6
EPSON EPSON AMERICA INC. SERVICE DEPARTMENT PRODUCT SUPPORT BULLETIN DATE: 06/24/87 SUBJECT: LQ-800/1000 IBM GRAPHICS CHARACTER PRINTING P-0007 Here at Product Support we receive numerous questions about the printing of IBM-type graphics on the LQ-800/1000 printers, and about the difference
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
EPSON AMERICA, INC.
EPSON
Product Support Bulletin
Subject:
24 Pin Printer Error and Beep Codes
Date: 4/3/91
PSB No: P-0076
Page(s): 1 of 4
Originator JV
Epson printers issue beep tones when certain error conditions exist. Those beeps
can assist you in locating and repairing customer’s printers. The following error
codes are listed by product name.
NOTE:
Most of the beeps issued by the printers are of .1 second duration with a .1
second pause between beeps. Where the beeps or the pauses are longer,
it has been noted in the text. The description “3 Beeps x 2” means two sets
of three beeps.
LQ-200/AP-3000
1 beep:
BEL code
1 beep:
A Control Panel setting is accepted.
3 beeps:
Paper End detected
5 beeps:
Abnormal carriage movement
On-Line light is flashing:
Printhead is over heated. Carriage will stop until
the printhead cools down.
LQ-500, LQ-510, LQ-1010, LQ-850, LQ-950, LQ-1050,
L1000, AP-4000, AP-4500
1 beep:
BEL code (.5 set beep)
1 beep:
A Control Panel setting is accepted
3 beeps:
Paper End detected
5 beeps:
Abnormal carriage movement