Epson LQ-1010 Product Support Bulletin(s)
Epson LQ-1010 - Impact Printer Manual
 |
View all Epson LQ-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson LQ-1010 manual content summary:
- Epson LQ-1010 | Product Support Bulletin(s) - Page 1
carriage movement On-Line light is flashing: Printhead is over heated. Carriage will stop until the printhead cools down. LQ-500, LQ-510, LQ-1010, LQ-650, LQ-950, LQ-1050, L1000, AP-4000, AP-4500 1 beep: BEL code (.5 sec beep) 1 beep: A Control Panel setting is accepted 3 beeps: Paper End - Epson LQ-1010 | Product Support Bulletin(s) - Page 2
LQ-800, LQ-1000, L750 1 beep: 1 beep: 3 beeps: 5 beeps: 5 beeps: LQ-860 1 beep: 1 beep: 3 beeps: 5 beeps: 5 beeps: 5 beeps: LQ-1500 1 beep: 5 beeps: 5 beeps: PSB No: P-0076 Page: 2 of 4 BEL code A Control Panel setting is accepted Paper End detected Abnormal carriage movement (.5 sec. pause between - Epson LQ-1010 | Product Support Bulletin(s) - Page 3
PSB No: P-0076 Page: 3 of 4 LQ-2500 NOTE: Printers with LCD displays use error messages along with beeps to inform the user of problems. The following messages will help you to troubleshoot problems. A blank LCD screen with the Power-on LED lit can be caused by a bent pin on one of the PROMS or - Epson LQ-1010 | Product Support Bulletin(s) - Page 4
LQ a jammed ribbon 11 Skewed printer back on. Both features were added to ensure proper paper handling and prevent paper jams, which can result in printhead failures. Incorrect jumper settings on the ROMA board may cause errors 10 or 20. The correct settings are documented in the Service Manual - Epson LQ-1010 | Product Support Bulletin(s) - Page 5
Product Support Bulletin Subject: Power Specifications Date: 2/7/90 Page: 1 of 2 PSB No: P-0060 Originator: RFB The following information is a list of the power requirements for the Epson 9 and 24 pin printers and laser printers. 504 VA maximum - Epson LQ-1010 | Product Support Bulletin(s) - Page 6
286.69 409.56 120v .7 Amp 84 VA maximum 286.69 If the power requirements of a particular Epson printer is not listed please refer to the appropriate User's Manual for the electrical specifications. In the event that the User's Manual is not available, locate the silver label on the back of the - Epson LQ-1010 | Product Support Bulletin(s) - Page 7
noise levels for the laser printers are averages while using single sheet paper and are not guaranteed figures. 9 PIN PRINTERS MODEL LX-810 NOISE LEVEL 56 dB(A) FX-850 FX-1050 DFX-5000 56 dB(A) 56 dB(A) 55 dB(A) DFX-8000 55 dB(A) 24 PIN PRINTERS LQ-510 LQ-1010 LQ-850 56 dB(A) 56 dB - Epson LQ-1010 | Product Support Bulletin(s) - Page 8
PSB No: P-0016D Page: 2 of 2 MODEL LQ-860 LQ-1050 LQ-2550 NOISE LEVEL 55 dB(A) 55 dB(A) 55 dB(A) LASER PRINTERS
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
EPSON AMERICA, inc.
EPSON
Product Support Bulletin
Subject:
24 Pin Printer Error and Beep Codes
Date: 4/3/91
PSB No: P-0076
Page(s): 1 of 4
Originator JV
Epson printers issue beep tones when certain error conditions exist. Those beeps
can assist you in locating and repairing customer’s printers. The following error
codes are listed by product name.
NOTE:
Most of the beeps issued by the printers are of .1 second duration with a .1
second pause between beeps. Where the beeps or the pauses are longer,
it has been noted in the text. The description “3 Beeps x 2” means two sets
of three beeps.
LQ-200/AP-3000
1 beep:
BEL code
1 beep:
A Control Panel setting is accepted.
3 beeps:
Paper End detected
5 beeps:
Abnormal carriage movement
On-Line light is flashing:
Printhead is over heated. Carriage will stop until
the printhead cools down.
LQ-500, LQ-510, LQ-1010, LQ-650, LQ-950, LQ-1050,
L1000, AP-4000, AP-4500
1 beep:
BEL code (.5 sec beep)
1 beep:
A Control Panel setting is accepted
3 beeps:
Paper End detected
5 beeps:
Abnormal carriage movement