Epson LQ-1500 Product Support Bulletin(s)

Epson LQ-1500 - Impact Printer Manual

Get Epson LQ-1500 - Impact Printer PDF manuals and user guides View all Epson LQ-1500 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson LQ-1500 manual content summary:

  • Epson LQ-1500 | Product Support Bulletin(s) - Page 1
    EPSON AMERICA, INC. EPSON Product Support Bulletin Subject: 24 Pin Printer Error and Beep Codes Date: 4/3/91 Page(s): 1 of 4 PSB No: P-0076 Originator JV Epson printers issue beep tones when certain error conditions exist. Those beeps can assist you in locating and repairing customer's printers
  • Epson LQ-1500 | Product Support Bulletin(s) - Page 2
    LQ-800, LQ-1000, L750 1 beep: 1 beep: 3 beeps: 5 beeps: 5 beeps: LQ-860 1 beep: 1 beep: 3 beeps: 5 beeps: 5 beeps: 5 beeps: LQ-1500 1 beep: 5 beeps: 5 beeps: PSB No: P-0076 Page: 2 of 4 BEL code A Control Panel setting is accepted Paper End detected Abnormal carriage movement (.5 sec. pause between
  • Epson LQ-1500 | Product Support Bulletin(s) - Page 3
    3 of 4 LQ-2500 NOTE: Printers with LCD displays use error messages along with beeps to inform the user of problems. The following messages will help you to troubleshoot problems. A blank LCD screen with the Power-on LED lit can be caused by a bent pin on one of the PROMS or jumper J1 may be set
  • Epson LQ-1500 | Product Support Bulletin(s) - Page 4
    LQ a jammed ribbon 11 Skewed printer back on. Both features were added to ensure proper paper handling and prevent paper jams, which can result in printhead failures. Incorrect jumper settings on the ROMA board may cause errors 10 or 20. The correct settings are documented in the Service Manual
  • Epson LQ-1500 | Product Support Bulletin(s) - Page 5
    the connector will usually alleviate the intermittent problem. Only Epson Authorized Service Centers may perform any soldering on this product. Q. The LQ-1500 will not go into condensed print, what is wrong? A. The printer is probably in LQ mode, the LQ-1500 will only print condensed while in the
  • Epson LQ-1500 | Product Support Bulletin(s) - Page 6
    of options available for the LQ-1500: 7351R 7493 8753 2.0 ROM Upgrade Kit IBM Emulation Kit Ribbon Availability of options is subject to change without notice, contact your nearest Sales Representative or Epson Accessory Marketing for purchase. EPSON AMERICA SERVICE, 23610 TEL0 AVENUE, TORRANCE
  • Epson LQ-1500 | Product Support Bulletin(s) - Page 7
    EPSON AMERICA. INC. SERVICE PRODUCT SUPPORT BULLETIN Date: 3/1/88 Subject: Epson Printer/Ribbon Compatibility Number: P-0013A PURPOSE: This list will assist in the correct matching of Epson ribbons to printers. The numbers listed below are the Epson part numbers and can be used to order ribbons
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
EPSON AMERICA, INC.
EPSON
Product Support Bulletin
Subject:
24 Pin Printer Error and Beep Codes
Date: 4/3/91
PSB No: P-0076
Page(s): 1 of 4
Originator JV
Epson printers issue beep tones when certain error conditions exist. Those beeps
can assist you in locating and repairing customer’s printers. The following error
codes are listed by product name.
NOTE:
Most of the beeps issued by the printers are of .1 second duration with a .1
second pause between beeps. Where the beeps or the pauses are longer,
it has been noted in the text. The description “3 Beeps x 2” means two sets
of three beeps.
LQ-200/AP-3000
1 beep:
BEL code
1 beep:
A Control Panel setting is accepted.
3 beeps:
Paper End detected
5 beeps:
Abnormal carriage movement
On-Line light is flashing:
Printhead is over heated. Carriage will stop until
the printhead cools down.
LQ-500, LQ-510, LQ-1010, LQ-850, LQ-950, LQ-1050,
L1000, AP-4000, AP-4500
1 beep:
BEL code (.5 set beep)
1 beep:
A Control Panel setting is accepted
3 beeps:
Paper End detected
5 beeps:
Abnormal carriage movement