Epson NX100 Quick Guide - Page 27
minutes. When it's finished, the, light stops flashing and remains - ink light
UPC - 010343869103
View all Epson NX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
10. Press the y Stop button to begin charging the ink. This takes about 1 1/2 minutes. When it's finished, the P On light stops flashing and remains on, and the B ink light goes out. Caution: Never turn off the NX100 Series while ink is charging or you'll waste ink. If the B ink light flashes, press the y Stop button and press down all the cartridges securely. Note: If you replaced a cartridge while copying a document or photo, cancel printing and make sure your original is still placed correctly on the document table. Then copy your original again. If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge. Replacing Ink Cartridges 27
Replacing Ink Cartridges
27
10.
Press the
y
Stop
button to begin charging the ink. This takes about 1 1/2
minutes. When it’s finished, the
P
On
light stops flashing and remains on,
and the
B
ink light goes out.
Caution:
Never turn off the NX100 Series while ink is charging or you’ll waste ink. If the
B
ink
light flashes, press the
y
Stop
button and press down all the cartridges securely.
Note:
If you replaced a cartridge while copying a document or photo, cancel printing and
make sure your original is still placed correctly on the document table. Then copy
your original again.
If you remove a low or expended ink cartridge, you cannot reinstall and use the
cartridge.