Epson NX100 Quick Guide - Page 33
Notices, Important Safety Instructions - controller
UPC - 010343869103
View all Epson NX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Notices Important Safety Instructions Before using your NX100 Series, read and follow these safety instructions: ■ Be sure to follow all warnings and instructions marked on the NX100 Series. ■ Use only the type of power source indicated on the NX100 Series label. ■ Use only the power cord that comes with the NX100 Series. Use of another cord may cause fires or shock. Do not use the cord with any other equipment. ■ Place the NX100 Series near a wall outlet where the plug can be easily unplugged. ■ If you won't be using the NX100 Series for a long period, unplug the power cord from the electrical outlet. ■ Always turn off the NX100 Series using the P On button, and wait until the P On light stops flashing before unplugging the printer or cutting off power to the electrical outlet. ■ Avoid plugging the NX100 Series into an outlet on the same circuit as a photo copier or air control system that regularly switches on and off, or on an outlet controlled by a wall switch or timer. ■ Do not let the power cord become damaged or frayed. ■ If you use an extension cord with the NX100 Series, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating. ■ Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust. ■ Leave enough room around the NX100 Series for sufficient ventilation. Do not block or cover openings in the case or insert objects through the slots. ■ Do not place or store the NX100 Series near a radiator or heating vent, in a dusty or moist environment, in direct sunlight, or outdoors. ■ Keep the away from potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones. ■ Do not use aerosol products that contain flammable gases inside or around the NX100 Series. Doing so may cause fire. Notices 33