Epson NX100 Quick Guide - Page 34

Ink Cartridge Safety - scanner

Page 34 highlights

■ Place the NX100 Series on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle. ■ Do not open the scanner section while the NX100 Series is copying, printing, or scanning. ■ Do not touch the flat white cable inside the NX100 Series, and be careful not to trap your fingers when closing the scanner. ■ Do not spill liquid on the NX100 Series or use it with wet hands. ■ Except as specifically explained in your documentation, do not disassembly, modify, or attempt to service the NX100 Series yourself. ■ Unplug the NX100 Series and refer servicing to qualified service personnel under the following conditions: if the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped or the case damaged; if the product does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions. ■ When storing or transporting the NX100 Series, do not tilt it, stand it on its side, or turn it upside down; otherwise ink may leak from the cartridges. Ink Cartridge Safety ■ Keep ink cartridges out of the reach of children and do not drink the ink. ■ Be careful when you handle used ink cartridges; there may be ink remaining around the ink supply port. If ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them immediately with water. ■ Do not put your hand inside the NX100 Series or touch any cartridges during printing. ■ Install a new ink cartridge immediately after removing an expended one. Leaving cartridges uninstalled can dry out the print head and may prevent the NX100 Series from printing. ■ If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the NX100 Series. Note that there is a valve in the ink supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding area. Store cartridges with their labels facing upward. 34 Important Safety Instructions

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

34
Important Safety Instructions
Place the NX100 Series on a flat, stable surface that extends beyond its base in all
directions. It will not operate properly if it is tilted or at an angle.
Do not open the scanner section while the NX100 Series is copying, printing, or
scanning.
Do not touch the flat white cable inside the NX100 Series, and be careful not to trap
your fingers when closing the scanner.
Do not spill liquid on the NX100 Series or use it with wet hands.
Except as specifically explained in your documentation, do not disassembly, modify,
or attempt to service the NX100 Series yourself.
Unplug the NX100 Series and refer servicing to qualified service personnel under the
following conditions: if the power cord or plug is damaged; if liquid has entered the
product; if the product has been dropped or the case damaged; if the product does not
operate normally or exhibits a distinct change in performance. Adjust only those
controls that are covered by the operating instructions.
When storing or transporting the NX100 Series, do not tilt it, stand it on its side, or
turn it upside down; otherwise ink may leak from the cartridges.
Ink Cartridge Safety
Keep ink cartridges out of the reach of children and do not drink the ink.
Be careful when you handle used ink cartridges; there may be ink remaining around
the ink supply port. If ink gets on your skin, wash it off with soap and water. If it gets
in your eyes, flush them immediately with water.
Do not put your hand inside the NX100 Series or touch any cartridges during
printing.
Install a new ink cartridge immediately after removing an expended one. Leaving
cartridges uninstalled can dry out the print head and may prevent the NX100 Series
from printing.
If you remove an ink cartridge for later use, protect the ink supply area from dirt and
dust and store it in the same environment as the NX100 Series. Note that there is a
valve in the ink supply port, making covers or plugs unnecessary, but care is needed to
prevent the ink from staining items that the cartridge touches. Do not touch the ink
cartridge ink supply port or surrounding area. Store cartridges with their labels facing
upward.