Epson OmniLink Merchant Services V3 Quick OMS Setup Guide Step 2 - Connect Pri

Quick OMS Setup Guide ‐‐‐ Connect Printers to OMS

1.

Check if the target printer has been registered in OMS, if not, register the printer.

-

Login to the OMC (OmniLink Management Console):

-

From “Team and Groups”, select correspond Team then Group

-

Click correspond Store

-

From Device list, check if this printer’s serial number is listed

-

If not, click the “Add” button

-

Fill in the printer information and click “Save”

Printer Serial Number label:

-

2.

Connect the printer to network via LAN cable, power printer on, wait for 30 seconds

until it prints out IP address chit. Check that the printed IP address is correct.

3.

Connect the printer to the POS terminal and run the POS application to make sure it can

print successfully to the printer.

4.

For Windows user, run T88VI utility on the PC to change the printer setting

* This step can be skipped if the printer was configured before shipping to the store

* T88VI utility can be download from

https://download.epson‐

biz.com/modules/pos/index.php?page=single_soft&cid=6039&pcat=3&pid=4983

-

Enable “Omnilink Merchant Service”

-

Configure Proxy server setting if necessary

-

Set time configuration

-

Click “Set” to apply the setting