Epson P4000 Product Support Bulletin(s)
Epson P4000 - Multimedia Storage Viewer Manual
 |
UPC - 010343856622
View all Epson P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson P4000 manual content summary:
- Epson P4000 | Product Support Bulletin(s) - Page 1
: Windows 98/ME/2000/XP/Vista/7 • Operating Systems: Mac OS 10.2.8 to 10.6.x • Memory Card Reader/Writer • 128MB or higher formatted Compact Flash or SD memory card (there must be no data on the card) • P-4000 battery installed (fully-charged battery recommended) • AC Adapter - the firmware update - Epson P4000 | Product Support Bulletin(s) - Page 2
Reader/Writer and copy the "PSVFIRM2" folder (including all the files in the folder) to the root directory of your memory card. 2. Verify that the battery is installed in the P-4000 3. Connect the AC adapter to the P-4000, but do not power on the unit. 4. After the firmware file has been downloaded - Epson P4000 | Product Support Bulletin(s) - Page 3
5. Press and hold down the "OK" button while sliding the "POWER" switch as shown below. Release the Power switch and continue holding down the OK button until the message below appears on the screen. Note: If you do not see this screen, power off the unit and start the firmware process again. Page - Epson P4000 | Product Support Bulletin(s) - Page 4
adapter during the firmware update process. 6. The firmware process is completed when you see the message "Resources Updated Successfully" displayed on the screen. 7. When you see the message "Shutdown Restart Device", power off the unit and remove the CompactFlash or SD memory card. Page 4 of 5 PSB - Epson P4000 | Product Support Bulletin(s) - Page 5
on the unit, you will be prompted to select the language and set the date and time. 9. To confirm the new firmware version, select Settings in the Home Menu. The firmware version is located on the lower right side of the screen. It should say 04.52. Note: Above screen shot is - Epson P4000 | Product Support Bulletin(s) - Page 6
EPSON PRODUCT SUPPORT BULLETIN Date: PSB #: Reference: Product(s): Subject: 04/09/2007 Originator: esc PSB.2007.04.002 Authorization: TE06-0866 Rev. A Total Pages: 1 P-2000 and P-4000 Multimedia Storage Viewers Compatibility issues with Lexar Media Compact Flash Memory Cards This bulletin - Epson P4000 | Product Support Bulletin(s) - Page 7
update for the P-4000 multimedia viewer. The updated firmware provides certain upgrades as outlined below. Description of Change: The firmware has been updated to version 04.51. Reason: The firmware provides the following upgrades: 1. The new firmware provides support for 2GB SD memory cards - Epson P4000 | Product Support Bulletin(s) - Page 8
Mac OS X) from the Epson website. To verify the firmware version, power on the unit, select Settings in the Home Menu and press the OK button. The firmware version is located in the lower right-hand corner of the screen, as shown below. Steps: 1. Install a blank memory card into a Memory Card Reader - Epson P4000 | Product Support Bulletin(s) - Page 9
, power off the unit and start the firmware process again. During the update process, the message screen will display the current firmware and updated firmware versions. Then the message "Updating Resources" will appear. Important: Do not remove the battery or disconnect the AC adapter during the - Epson P4000 | Product Support Bulletin(s) - Page 10
6. The firmware process is completed when you see the message "Resources Updated Successfully" displayed on the screen. 7. When you see the message "Shutdown Restart Device", power off the unit and remove the CompactFlash or SD memory card. 8. When you power on the unit, you will be prompted to
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
EPSON
Product Support Bulletin
Date:
2/25/2010
Originator:
jd
PSB #:
PSB.2010.03.002
Authorization:
Reference:
TE09-0219 Rev. A
Total Pages:
5
Product(s):
Epson P-4000 Multimedia Storage Viewer
Subject:
New Firmware Release version 04.52
This bulletin was created to inform you of a firmware update that provides upgrades to the
P-4000.
Description of Change:
The firmware has been updated to version
04.52
.
Reason:
The firmware corrects the following symptoms when using certain high-speed Lexar Compact
Flash (CF) memory cards such as the Professional 133x or the Platinum II 80x speed:
1. Card cannot be recognized
2. Unable to display thumbnails
3. Thumbnails appear but do not display correctly
4. Thumbnails display but there is no image
Note:
Although this firmware update provides support for higher speed Lexar memory cards,
some cards may not be supported.
P-4000 Firmware Update Instructions:
Note
:
Before starting the firmware update process, confirm that there are no files on the
Memory Card.
To download and install the new firmware file, you will need the following:
•
Windows-based PC or Macintosh computer with Internet access
•
Operating Systems:
Windows 98/ME/2000/XP/Vista/7
•
Operating Systems:
Mac OS 10.2.8 to 10.6.x
•
Memory Card Reader/Writer
•
128MB
or higher formatted Compact Flash or SD memory card (there must be no data
on the card)
•
P-4000 battery installed (fully-charged battery recommended)
•
AC Adapter – the firmware update should be performed with the unit powered by its AC
power adapter.
Page 1 of 5
PSB.2010.03.002