Epson PowerLite 54c Quick Start
Epson PowerLite 54c Manual
 |
View all Epson PowerLite 54c manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite 54c manual content summary:
- Epson PowerLite 54c | Quick Start - Page 1
two cables: EPSON® PowerLite® 54c/74c Quick Setup TART S Power cord Computer cable 1 Make sure your projector and laptop are turned off. 2 Connect one end of the computer cable to the Computer1/Component Video1 or Computer2/Component Video2 port on the projector. Follow these instructions to - Epson PowerLite 54c | Quick Start - Page 2
you display on the projector screen as well as the LCD screen. If the Arrange option isn't available, you may need to select one of the Simulscan resolution settings. See your User's Guide for instructions. EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite and PrivateLine are
-
1 -
2
 |
 |
1
Remove the lens cap.
2
Connect the power cord to your
projector and plug the other end
into an electrical outlet.
3
Press the
Power
button. The projector
beeps, and the Power light flashes green
and then stays on.
4
Turn on or restart your laptop. (Windows
®
only:
If you see this Add New Hardware screen,
click
Cancel
.)
S
T
A
R
T
H
E
R
E
Turn over
T
urn on your equipment
C
onnect the projector
to your laptop
Power cord
Computer cable
Follow these instructions to connect the projector to
your laptop. To connect other devices—such as a VCR,
DVD, or desktop PC—and for complete instructions on
using the projector, see your
User’s Guide
.
EPSON
®
PowerLite
®
54c/74c
Quick Setup
Lens cap
Caution:
Before unplugging
the projector...
To shut the projector down properly:
1.
Press the
Power
button twice.
Let the projector cool while the
Power light flashes orange
(about 20 seconds).
2.
Once the light stops flashing and
stays on, it’s safe to unplug
the projector.
Never unplug the projector when
the Power light is green or
flashing orange.
For most setups, you’ll need just these two cables:
Power button
1
Make sure your projector and laptop are turned off.
2
Connect one end of the computer cable to the
Computer1/Component Video1
or
Computer2/Component Video2
port on the projector.
3
Connect the other end to your laptop’s video or
monitor port.
If you can’t connect the cable to your Macintosh
®
PowerBook,
®
you
may needto use an adapter. See your
User’s Guide
for instructions.