Epson PowerLite 713c User Manual

Epson PowerLite 713c Manual

Get Epson PowerLite 713c PDF manuals and user guides View all Epson PowerLite 713c manuals
Add to My Manuals
Save this manual to your list of manuals

Epson PowerLite 713c manual content summary:

  • Epson PowerLite 713c | User Manual - Page 1
    EPSON® PowerLite® 503c/713c Multimedia Projector User's Guide
  • Epson PowerLite 713c | User Manual - Page 2
    cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in this User's Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. WARNING
  • Epson PowerLite 713c | User Manual - Page 3
    2 Using Your Documentation 3 Reading This Manual Online 3 Getting More Information 4 Registration and Warranty 5 Unpacking the Projector 6 Additional Components 7 Optional Accessories 8 Setting Up the Projector 9 Positioning the Projector 10 Connecting to a Laptop Computer 12 Connecting
  • Epson PowerLite 713c | User Manual - Page 4
    Image 23 Adjusting the Image Shape 24 Shutting Down the Projector 25 Using the Remote Control 27 Turning On and Using the Remote Control 28 Installing Batteries 28 Turning On the Remote Control 28 Using the Remote Control 29 Controlling the Picture and Sound 30 Switching Between Picture
  • Epson PowerLite 713c | User Manual - Page 5
    Air Filter 53 Replacing the Lamp 54 Transporting the Projector 56 Solving Problems 57 Using On-Screen Help 58 What To Do When the Lights Flash 59 Solving Problems with the Image or Sound 62 Solving Problems with the Remote Control 68 Where To Get Help 69 Telephone Support Services 69 v
  • Epson PowerLite 713c | User Manual - Page 6
    Additional Equipment 71 Installing the Projector 72 Connecting to an External 79 Appendix B: Notices 81 Important Safety Instructions 81 Remote Control Information 83 Declaration of Conformity Specifications 89 General 89 Projection Lamp 90 Remote Control 90 Mouse Compatibility 90
  • Epson PowerLite 713c | User Manual - Page 7
    768 pixels (PowerLite 713c) or 800 × 600 pixels (PowerLite 503c). Three 0.9-inch LCDs provide a 400:1 contrast ratio for incredibly vivid images and clear text. Support for S-video contributes to theater-quality performance. With EPSON's patented SizeWise™ technology, the projector supports computer
  • Epson PowerLite 713c | User Manual - Page 8
    player, digital camera, or any other video source to your projector. You can connect both computer and video sources at the same time and easily switch between them. See page 15 for instructions. I Using the remote control The remote control lets you switch from computer to video source, with access
  • Epson PowerLite 713c | User Manual - Page 9
    about your projector. Reading This Manual Online Your PowerLite 503c/713c CD-ROM includes an electronic copy of this manual. You may PowerLite CD-ROM in your CD-ROM drive, select the Install/View User's Guide button and click Install User's Guide or View User's Guide. When you open the manual
  • Epson PowerLite 713c | User Manual - Page 10
    system Provides assistance for common problems. Available from the Help button on the projector or the remote control. See page 58 for details. I support.epson.com Download FAQs and e-mail your questions to EPSON support. I CD-ROM The EPSON PowerLite 503c/713c CD-ROM lets you register electronically
  • Epson PowerLite 713c | User Manual - Page 11
    If you still need help after checking this User's Guide and the sources listed above, you can use the EPSON PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the card in your Owner's Kit. Registration and Warranty Your projector comes with a basic carry-in
  • Epson PowerLite 713c | User Manual - Page 12
    Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: Freeze A/V Mute E-Zoom Power R/C ON OFF 3 2 5 4 1 Enter Esc batteries remote control EPSON PowerLite 503c/713c CD-ROM (not needed to use your projector) power cord computer cable PS
  • Epson PowerLite 713c | User Manual - Page 13
    I To amplify your computer's audio through the projector's sound system, you need a computer audio cable Macintosh adapter set shown on page 77 (available from EPSON; see page 8). Older iMac systems may need a an additional cable to use the remote control as a wireless mouse. If your Macintosh doesn't have
  • Epson PowerLite 713c | User Manual - Page 14
    Optional Accessories To enhance your use of the projector, EPSON provides the following optional accessories: Product Replacement lamp and air filter Soft carrying cases: Samsonite® wheeled soft case Slimline soft shoulder bag Notebook/projector soft shoulder bag ATA molded hard shell case Ceiling
  • Epson PowerLite 713c | User Manual - Page 15
    it to a laptop computer or video source. If you need to connect the projector to a desktop or workstation computer, see Appendix A. You'll find instructions for the following in this chapter: I Positioning the projector I Connecting to a laptop computer I Connecting to video sources Setting Up the
  • Epson PowerLite 713c | User Manual - Page 16
    , and remain close enough to the equipment to be able to control it. Use the figure below as a guideline to help you determine how far from the screen to place the projector. Image size generally increases with distance, but may vary depending on how you position the lens ring and whether you
  • Epson PowerLite 713c | User Manual - Page 17
    still be rectangular, but you won't be able to fill the whole screen with the image. note After positioning the projector, you may want to connect a Kensington MicroSaver anti-theft device to the lock port on the projector's left side. You can purchase this from EPSON; see page 8. Setting Up the
  • Epson PowerLite 713c | User Manual - Page 18
    follow the instructions for connecting to a video device on page 15. Connecting to a Laptop Computer You can connect the PowerLite projector to any projector's Computer port. note Laptop configurations vary. See your computer manual for the location of the ports needed to connect your projector.
  • Epson PowerLite 713c | User Manual - Page 19
    If you don't need to make any other connections, you can plug in your projector and turn it on. See page 18 for instructions. Connecting the Cable for Remote Mouse Control Using the remote control as a wireless mouse lets you click through slideshow-style presentations, such as PowerPoint, from up
  • Epson PowerLite 713c | User Manual - Page 20
    to your laptop's headphone jack or audio-out jack. (Jack locations vary; see your computer manual if you're not sure which jack to use.) If you don't need to make any other connections, you can plug in your projector and turn it on. See page 18 for instructions. 14 Setting Up the
  • Epson PowerLite 713c | User Manual - Page 21
    , which may be included with your video source, or may be purchased from an electronics store or video dealer. Follow the instructions below for your type of connection. note The projector does not support TV antenna cable F connectors. Connecting the RCA A/V Cable Before starting, make sure the
  • Epson PowerLite 713c | User Manual - Page 22
    are turned off. 1. Insert one end of an S-video cable into the projector's S-Video connector. 2. Insert the other end into the S-video output port cable 3. Connect the RCA A/V cable to the left and right Audio jacks on the projector. (Match the red and white plugs to the red and white jacks; you won
  • Epson PowerLite 713c | User Manual - Page 23
    give your presentation. Although you can operate the projector without it, the remote control lets you use additional features. See Chapter 3 for instructions on using the remote. This chapter covers the following: I Turning on the projector and other equipment I Adjusting the image I Shutting down
  • Epson PowerLite 713c | User Manual - Page 24
    's power inlet. power light 2. Connect the other end to a grounded electrical outlet. The power light on top of the projector turns orange, indicating that the projector is receiving power but not yet turned on. 3. Use the tab on the lens ring to rotate the ring and extend the lens. tab 18
  • Epson PowerLite 713c | User Manual - Page 25
    generated by the lens can damage the cap. 5. Press the red Power button on top of the projector. Power button power light The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green. warning Never look into the lens
  • Epson PowerLite 713c | User Manual - Page 26
    section for help. Once you see your image, turn to page 22 for instructions on focusing and making other image adjustments. When you're done with your presentation, shut down the projector as described on page 25. Shutting down the projector correctly prevents premature lamp failure and possible
  • Epson PowerLite 713c | User Manual - Page 27
    If you're using a Macintosh Laptop: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Control Panels, then click Monitors or Monitors and Sound. 2. Click the Arrange icon. click here drag
  • Epson PowerLite 713c | User Manual - Page 28
    icon such as or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it. Check your laptop's manual or online help for details. On most systems, the or CRT/LCD key lets you toggle between the LCD screen and the projector, or display on both at the same time
  • Epson PowerLite 713c | User Manual - Page 29
    image. You can also change the image size by moving the projector closer to or farther away from the screen. You can use the E-Zoom button on the remote control to zoom in on a portion of the image. See page 31 for instructions. Adjusting the Height of Your Image If the image is
  • Epson PowerLite 713c | User Manual - Page 30
    projected image isn't rectangular or has a "keystone" shape, do one or more of the following: I If your image looks like or , you've placed the projector off to one side of the screen, at an angle. Move it directly in front of the center of the screen, facing the screen squarely
  • Epson PowerLite 713c | User Manual - Page 31
    to shut it down. This extends the life of the lamp and protects the projector from possible overheating. 1. If you're using a computer, shut it down first. 2. To turn off the projector, press the red Power button on the projector or remote control. You see a confirmation message. (If you don't want
  • Epson PowerLite 713c | User Manual - Page 32
    26 Using the Projector
  • Epson PowerLite 713c | User Manual - Page 33
    . You can use it to turn the projector on and off, zoom in on a portion of your image, and highlight your presentation. If you're using a computer and you've connected the mouse cable (as described in Chapter 1 or Appendix A), you can use the remote control as a wireless mouse. This chapter covers
  • Epson PowerLite 713c | User Manual - Page 34
    of used batteries according to local regulations. I Remove batteries if you won't be using the projector for a long period of time. Turning On and Using the Remote Control Before using the remote control, you need to install its batteries and turn it on as described below. Installing Batteries
  • Epson PowerLite 713c | User Manual - Page 35
    feet of the projector. Point the remote control either at the front or back of the projector or at the screen (the projector's front sensor can detect signals bounced off the screen). I Press the button for the function you want to use. See the following pages for instructions. I For some functions
  • Epson PowerLite 713c | User Manual - Page 36
    Menu Help Comp S-Video Video Auto Resize P in P - Volume + select computer source select video source adjust volume select S-video source Switching Between Picture Sources If you've connected your projector to a computer and a video source, you can use the buttons on the remote control
  • Epson PowerLite 713c | User Manual - Page 37
    screen whenever you press the A/V Mute button. See page 44 for instructions. Stopping Action You can use the remote control to stop the action in your video or computer image. 3 2 5 4 1 Enter Esc Menu Help Comp S-Video Video Auto Resize P in P - Volume + Using the Remote Control 31
  • Epson PowerLite 713c | User Manual - Page 38
    resized to display in the projector's native format-1024 × 768 pixels (PowerLite 713c) or 800 × 600 pixels (PowerLite 503c). If only part of your computer image is displayed, you can correct it with the Resize button. I Press the Resize button on the remote control. The screen image is automatically
  • Epson PowerLite 713c | User Manual - Page 39
    highlight areas on the screen using the numbered buttons on the remote control. You can use these "special effects" features to You can customize the highlighting tools through the Effect menu. See page 43 for instructions. Freeze A/V Mute E-Zoom Power R/C ON OFF 3 2 5 4 1 Enter Esc
  • Epson PowerLite 713c | User Manual - Page 40
    note You can use the projector's Effect menu to select a different pointer. See page 43. Using the Pointer You can use the pointer tool to place an arrow anywhere on your screen. 1. To activate the pointer tool, press button 1 on the remote control. A yellow arrow appears in the upper left corner
  • Epson PowerLite 713c | User Manual - Page 41
    points. 1. To activate the line or marker tool, press the 3 button on the remote control. A pink marker icon appears in the upper left corner of the screen. This is of the Enter button. note You can use the projector's Effect menu to change the width and color for both "marker" and freehand lines.
  • Epson PowerLite 713c | User Manual - Page 42
    since you won't need to stand near your computer to change slides, for example. To control your computer with the remote, make sure you have connected the mouse cable between the projector and your computer as described on page 13 (for laptops) or in Appendix A (for other systems). Freeze A/V Mute
  • Epson PowerLite 713c | User Manual - Page 43
    covers the following information: I Using the menu system I Adjusting the image I Adjusting the sound I Customizing the highlighting tools I Creating your own startup screen I Customizing projector features I Viewing lamp usage and other information I Restoring the default settings Fine-tuning the
  • Epson PowerLite 713c | User Manual - Page 44
    menus let you adjust and customize the projector features from the remote control: I The Video menu controls the look menu provides information about lamp status and computer or video settings. I The Reset All menu lets you restore the factory defaults for all the projector settings. 38 Fine-tuning
  • Epson PowerLite 713c | User Manual - Page 45
    , press the Menu button on the remote control. You see the menu screen: menu options menus Menu button Freeze A/V Mute E-Zoom Power R/C ON OFF 3 2 5 4 1 Enter Esc Menu Help Comp S-Video Video Auto Resize P in Enter, select Yes, and then press Enter. Fine-tuning the Projector 39
  • Epson PowerLite 713c | User Manual - Page 46
    computer or video. note If you have repositioned the image, you can use the Auto button on the remote control to restore the default settings. Repositioning the Image Follow these steps to fine-tune the image position: image is positioned the way you want, press Esc. 40 Fine-tuning the Projector
  • Epson PowerLite 713c | User Manual - Page 47
    Enter button to set one of the following options: I Tracking (computer images only) Removes unwanted vertical lines from a computer image by matching the projector's internal clock to various computer signals. I Sync (computer images only) Corrects fuzziness or screen flicker by synchronizing the
  • Epson PowerLite 713c | User Manual - Page 48
    to set the following options: I Volume I Tone (treble/bass balance) 5. When you're finished adjusting the sound, press Esc or Menu. 42 Fine-tuning the Projector
  • Epson PowerLite 713c | User Manual - Page 49
    you choose the color and width of the freehand line. I Cursor Speed Lets you choose low, medium, or high speed for highlighting. Fine-tuning the Projector 43
  • Epson PowerLite 713c | User Manual - Page 50
    or video source such as a VCR or digital camera. Then follow these steps to capture the image and transfer it to the projector: 1. Press the Menu button on the remote control. You see the main menu. 2. Use the Enter button to highlight the User's Logo menu. 3. Press Enter to select it. You
  • Epson PowerLite 713c | User Manual - Page 51
    a message like the one at the right. 7. Use the Enter button on the remote control to select a zoom rate (display size), and then press Enter. 8. When Enter. Saving the logo may take a few minutes. Do not use the projector or other sources (computer, video, speaker, etc.) while the logo is being
  • Epson PowerLite 713c | User Manual - Page 52
    , press the A/V Mute button to display your image. Press it again to turn off the image. Customizing Projector Features You can use the Setting menu to enable the projector's power management system, adjust the image shape, and customize several other features. 1. Press the Menu button. 2. Use
  • Epson PowerLite 713c | User Manual - Page 53
    . See page 44 for instructions on transferring an image to use for the A/V Mute display. I Power Mgmt Sys Enables or disables the power management system, which turns the lamp off when the projector has not received any input signals for 30 minutes. 5. When you're finished, press Esc or Menu
  • Epson PowerLite 713c | User Manual - Page 54
    button to set the following options: I Language Select from nine languages to be used for the projector menus. I Startup Screen Turn on to display the image or logo you have captured whenever the projector starts. See page 44 for more information. I Color Temp Adjusts the whiteness of the screen
  • Epson PowerLite 713c | User Manual - Page 55
    computer display settings on the right: note If you access the About menu when the projector display is set to video, you only see the lamp life and the video signal setting. The life span of the lamp is about 1000 hours. If the number shown is close to 1000, make sure you
  • Epson PowerLite 713c | User Manual - Page 56
    Restoring the Default Settings The Reset All option lets you return all the projector settings to their default values. Select Reset All and press the Enter button on the remote control to display the confirmation screen. Select Yes to reset all the default settings or No to cancel. 50 Fine-tuning
  • Epson PowerLite 713c | User Manual - Page 57
    air filter can block ventilation needed to cool the projector and keep it from overheating. The only parts you should replace are the lamp and air filter. If any other part needs replacing, contact your dealer or a qualified servicer. This chapter covers the following: I Cleaning the lens I Cleaning
  • Epson PowerLite 713c | User Manual - Page 58
    with lens cleaner and gently wipe the lens surface. extend the lens and remove the cap before cleaning Cleaning the Projector Case Before you clean the case, first turn off the projector and unplug the power cord. I To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth. I To
  • Epson PowerLite 713c | User Manual - Page 59
    to remove or if the filter is torn, replace it. Contact your dealer or call EPSON at (800) 873-7766 in the United States and Canada to obtain a new one. note When you get a replacement lamp for your projector, a new air filter is included. You should replace the filter when you replace the
  • Epson PowerLite 713c | User Manual - Page 60
    on (after about 900 hours of use). To maintain projector brightness and image quality, replace the lamp as soon as possible. Contact your dealer or call EPSON at (800) 873-7766 in the United States and Canada for a replacement lamp. Request part number ELPLP14. 54 Maintaining and Transporting the
  • Epson PowerLite 713c | User Manual - Page 61
    Follow these steps to replace the lamp: 1. Turn off the projector, then unplug the power cord. 2. Allow the projector to cool down for at least half an hour (if it has been on). 3. Turn the projector upside-down to access the lamp compartment. 4. Use a screwdriver to loosen the retaining screw on
  • Epson PowerLite 713c | User Manual - Page 62
    and tighten its screw securely. (The projector won't come on if the lamp cover is loose.) note EPSON shall not be liable for any damages incurred during transportation. Transporting the Projector The projector contains many glass and precision parts. If you need to transport it, please follow
  • Epson PowerLite 713c | User Manual - Page 63
    contact technical support for problems you can't solve yourself. This chapter explains the following: I Using the projector's on-screen help system I What to do when the projector's status lights flash I Solving problems with the image or sound I Solving problems with the remote control I Contacting
  • Epson PowerLite 713c | User Manual - Page 64
    side of the Select (Keystone) button on the projector (or use the Enter button on the remote control) to adjust it. 5. To exit the Help system, press the blue ? Help button. If none of the suggestions solves your problem, see additional solutions to problems in the following sections. 58 Solving
  • Epson PowerLite 713c | User Manual - Page 65
    What To Do When the Lights Flash The lights on top of the projector indicate the projector's status and let you know when a problem occurs. power light lamp light temperature light If the projector is not working correctly, first turn it off and unplug it. Then plug the power cord back in and turn
  • Epson PowerLite 713c | User Manual - Page 66
    projector for ventilation. I The air filter may be clogged. Clean or replace it as described on page 53. I If the projector continues to overheat after you clean the air filter, the problem may be caused by damage to the cooling fan or internal circuits. Contact EPSON for help. 60 Solving Problems
  • Epson PowerLite 713c | User Manual - Page 67
    of space around and under the projector for ventilation. If it continues to overheat, you may need to change the air filter. See page 53 for instructions. There is a problem with the cooling fan or temperature sensor. Turn off the projector and unplug it. Contact EPSON for help. Solving Problems 61
  • Epson PowerLite 713c | User Manual - Page 68
    A. I Try restarting your computer. I If you've connected a computer and one or more video sources, you may need to press the Source button (on the projector) or the Comp, Video, or S-Video button (on the remote control) to select the correct source. Allow a few seconds for the
  • Epson PowerLite 713c | User Manual - Page 69
    your computer's resolution doesn't exceed UXGA (1600 × 1200, for the PowerLite 713c) or SXGA (1280 × 1024, for the PowerLite 503c), and the frequency is supported by the projector (see page 92). If necessary, change your computer's resolution setting as described on page 64. Solving Problems 63
  • Epson PowerLite 713c | User Manual - Page 70
    on the remote control. I Make sure the image Position setting is correct on the Video menu. See page 40 for more information. I Make sure your computer's resolution setting is correct. Ideally, it should be 1024 × 768 to match the projector's native resolution (800 × 600 on the PowerLite 503c). If
  • Epson PowerLite 713c | User Manual - Page 71
    in the projected image quality when the image is displayed simultaneously on your laptop computer and the projector, turn off the laptop's LCD display. The image is blurry. I There may be dirt or smears on the lens. Clean select Reset to return to the factory default settings. Solving Problems 65
  • Epson PowerLite 713c | User Manual - Page 72
    remote control. This resets the projector's tracking and sync settings. I If further adjustment is needed, you can fine-tune the Tracking and Sync settings manually you're displaying a computer image, use the Gamma option in the projector's Video menu to adjust the color. If you're displaying video,
  • Epson PowerLite 713c | User Manual - Page 73
    down or muted. Make sure the audio cable is securely connected to both the projector and your computer's headphone jack or audio out jack. See page 14 (for Source button on the projector-or the Comp, Video, or S-Video button on the remote control-to select the correct source. Solving Problems 67
  • Epson PowerLite 713c | User Manual - Page 74
    ON OFF 3 2 5 4 1 Enter Esc Solving Problems with the Remote Control The projector doesn't respond to remote control commands. I Make sure the remote control is turned on. on/off switch I Make sure you are within 30 feet of the projector, and within range of the projector's front or back sensor
  • Epson PowerLite 713c | User Manual - Page 75
    a day, as listed in the following table. Service World Wide Web Presenters Online Access From the Internet, you can reach EPSON's product support page at http://support.epson.com. After selecting your product, you can access troubleshooting information, download product documentation, and receive
  • Epson PowerLite 713c | User Manual - Page 76
    call, please have the following information ready: I Product name (EPSON PowerLite 503c or EPSON PowerLite 713c) I Product serial number (located on the bottom of the projector) I Computer configuration I Description of the problem You can purchase screens, carrying cases, or other accessories from
  • Epson PowerLite 713c | User Manual - Page 77
    to Additional Equipment This appendix explains how to connect the projector to a desktop computer or Macintosh, or a high-end workstation. The following information is covered: I Installing the projector I Connecting to a PC desktop computer I Connecting to a desktop Macintosh I Connecting
  • Epson PowerLite 713c | User Manual - Page 78
    setups: front projection, ceiling mounting, or rear projection onto a semi-transparent screen. To project from overhead, you'll need to select Ceiling in the projector's Advanced menu. To project from the rear, select Rear Proj. See page 48 for more information. If you're ceiling-mounting the
  • Epson PowerLite 713c | User Manual - Page 79
    . Connecting to a PC Desktop Computer You can connect the projector to any IBM compatible PC. This section includes instructions for the following: I Connecting the computer cable I Connecting the mouse cable (if you want to use the remote control as a mouse) I Connecting an optional audio cable (if
  • Epson PowerLite 713c | User Manual - Page 80
    Computer Cable 1. Disconnect the monitor cable from the video port on the back of the computer. 2. Connect one end of the computer cable to the projector's Computer port. 3. Connect the other end of the computer cable to the computer's video port. 4. Tighten the screws on the connectors. 74 Appendix
  • Epson PowerLite 713c | User Manual - Page 81
    the Mouse Cable To use the remote control as a mouse, follow the steps below. You'll use a different mouse cable, depending on whether your computer has a round PS/2 mouse port or a flat USB port. 1. Connect one end of the appropriate mouse cable to the projector's Mouse/Com port or the USB
  • Epson PowerLite 713c | User Manual - Page 82
    Cable If your presentation includes sound and you want to use the projector's built-in speakers, you can use a computer audio cable. The dealers. 1. Connect one end of the audio cable to the Audio In jack on the projector. Audio In jack audio cable 2. Connect the other end of the audio cable to the
  • Epson PowerLite 713c | User Manual - Page 83
    Connecting to a Desktop Macintosh You can connect the projector to any desktop Macintosh. This section includes instructions for the following: I Connecting the computer video cable I Connecting the mouse cable (if you want to use your remote control as a mouse) I Connecting an optional audio cable
  • Epson PowerLite 713c | User Manual - Page 84
    steps below. If the Macintosh has a USB port, you can use the USB mouse cable that came with the projector. If it has a round mouse port, you'll need a Macintosh ADB mouse cable. See your projector dealer for help in obtaining the correct cable. 1. Connect one end of the mouse cable to the
  • Epson PowerLite 713c | User Manual - Page 85
    a High-End Workstation Your PowerLite projector is capable of remapping input resolutions up to 1600 × 1200 pixels (1280 × 1024 pixels on the PowerLite 503c). Since 1280 × ; contact your computer dealer if you need help connecting your workstation. Appendix A: Connecting to Additional Equipment 79
  • Epson PowerLite 713c | User Manual - Page 86
    80 Appendix A: Connecting to Additional Equipment
  • Epson PowerLite 713c | User Manual - Page 87
    BAppendix B: Notices This appendix includes safety instructions and other important information about your EPSON PowerLite 503c/713c. Important Safety Instructions Follow these safety instructions when setting up and using the projector: I Do not place the projector on an unstable cart, stand, or
  • Epson PowerLite 713c | User Manual - Page 88
    will not be used for extended periods. I Do not place the projector and remote control on top of heat-producing equipment or in a hot location. I Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power cord or plug
  • Epson PowerLite 713c | User Manual - Page 89
    pixels may be missing or constantly illuminated. Remote Control Information You can operate the projector by remote control via a line-of-sight infrared ( . These conditions commonly cause problems for most infrared-controlled equipment. Try the following: I The remote control unit's batteries may be
  • Epson PowerLite 713c | User Manual - Page 90
    EPSON AMERICA, INC. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part undesired operation. Trade Name: EPSON Type of Product: LCD Projector Model: EMP-713, ELP-503 84 Appendix
  • Epson PowerLite 713c | User Manual - Page 91
    a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits not installed and used in accordance with the instructions, may cause harmful interference to radio or the dealer or an experienced radio/TV technician for help. WARNING The connection of a non-shielded equipment interface
  • Epson PowerLite 713c | User Manual - Page 92
    days for projector lamps). What EPSON Will Do To Correct Problems: If you elect carry-in warranty service, please EPSON Dealer or EPSON Customer Care Center. EPSON will, at its option, repair or replace on an exchange basis the defective unit, without charge for parts or labor. When warranty service
  • Epson PowerLite 713c | User Manual - Page 93
    REMEDY ABOVE FAILS, EPSON'S ENTIRE LIABILITY SHALL BE LIMITED TO A REFUND OF THE PRICE PAID FOR THE EPSON PRODUCTS COVERED BY THIS , which vary from jurisdiction to jurisdiction. To locate the Authorized EPSON Servicer nearest you, call the EPSON ConnectionSM at (800) 637-7661 + PIN or (562) 276
  • Epson PowerLite 713c | User Manual - Page 94
    88 Appendix B: Notices
  • Epson PowerLite 713c | User Manual - Page 95
    Specifications General Type of display Size of LCD panels Lens Resolution Color reproduction Brightness 22.9 mm) F=2.0 to 2.2, f=35 to 42 mm 713c: 1024 × 768 pixels (native format) 503c: 800 × 600 pixels (native format) 24 bit, 16.7 million colors 713c: 1200 lumens (ANSI) 503c: 1100 lumens (ANSI)
  • Epson PowerLite 713c | User Manual - Page 96
    Type UHE (Ultra High Efficiency) Power consumption 150 W Lamp life About 1000 hours Part number ELPLP14 Remote Control Range 32.8 feet (10 meters) Batteries Alkaline AA (2) Mouse Compatibility Supports PS/2, USB, ADB Dimensions Height Width Depth Weight 2.8 to 3.4 inches (72 to 87
  • Epson PowerLite 713c | User Manual - Page 97
    140 °F (-10 to 60 °C) Operating: 20 to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing Safety United States Canada CE Marking FCC Part 15B Class B UL1950 Rev. 3 DOC ICES003 Class B CSA C22.2 No. 950 Rev. 3 Directive 89/336/EEC, 92/31/EEC EN 60950 Appendix C: Technical Specifications
  • Epson PowerLite 713c | User Manual - Page 98
    ; see the following table for compatible formats. As noted below, some images are automatically resized to display in one of the projector's "native" formats (such as XGA). In addition, the frequencies of some computers may not allow images to display correctly; see your computer's documentation for
  • Epson PowerLite 713c | User Manual - Page 99
    720 × 5402 720 × 5402 1 The image is resized so that it displays using one of the projector's native formats (PowerLite 503c only). 2 The image is resized so that it displays using one of the projector's native formats. 3 Not supported on the PowerLite 503c. Appendix C: Technical Specifications 93
  • Epson PowerLite 713c | User Manual - Page 100
    Computer Video Port Pin Assignments The Computer port is a female video RGB, 15-pin micro-D-style connector. Here are its pin assignments: Pin no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Computer port Red video Green video Blue video GND GND Red GND Green GND Blue GND Reserved Synchronous GND GND SDA
  • Epson PowerLite 713c | User Manual - Page 101
    device, 15 to 16 menu, 38, 42 outputting to external sound system, 72 to 73 problems, troubleshooting, 67 turning off (using A/V Mute), 31 Audio Out jack, 73 Auto button, 40 Digital camera, connecting to, 15 to 16 Distance from projector to screen, 10 Drawing on the screen, 33 to 36 DVD player, connecting to,
  • Epson PowerLite 713c | User Manual - Page 102
    EPSON accessories, 8, 70 PrivateLine Support, 5, 69 technical support Help, 4 to 5, 69 to 70 Help button, 58 Help projector, 44 to 45 correcting shape of, 24, 46, 64 focusing, 23 height, adjusting, 23 positioning, 23, 40 problems with, troubleshooting remote control), 28 Lights, status, 59 to 62 Lines
  • Epson PowerLite 713c | User Manual - Page 103
    light, 59 supply, 90 PowerBook, connecting to, 12 to 14 Presenters Online, 4, 69 PrivateLine Support, 5, 69 Problems color, 66 image, 62 to 66 remote control, 68, 83 sound, 67 Projection lamp See Lamp Projector carrying case, 8, 56 cleaning, 52 distance from screen, 10, 89 feet, adjusting height
  • Epson PowerLite 713c | User Manual - Page 104
    T Technical support, 4, 69 to 70 Temperature requirements, 91 status light, 59 Tint setting, 41 Tone setting, 42 Tracking, ajusting, 41 Transporting projector, 56 Treble, adjusting, 42 Troubleshooting image and sound problems, 62 to 67 projector problems, 57 to 67 remote control problems, 68 Turning
  • Epson PowerLite 713c | User Manual - Page 105
    Video sources, connecting to, 15 to 16 Volume button, 30 setting, 42 W Warning lights, 59 to 62 Warranty, 5, 86 to 87 Workstations, connecting projector to, 79 Z Zoom ratio, 89 Zooming image, 23, 31 Index 99
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
EPSON
®
PowerLite
®
503c/713c
Multimedia Projector
User’s Guide