Epson PowerLite 750c Quick Start
Epson PowerLite 750c Manual
 |
View all Epson PowerLite 750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite 750c manual content summary:
- Epson PowerLite 750c | Quick Start - Page 1
projector. Epson® PowerLite® 750c/760c Guide. Adjust the image 1 If you've turned on your notebook and you don't see an image, press the Source Search button on the projector to select the image source. NOTE: If you still see a blank screen or have other display problems, see the troubleshooting - Epson PowerLite 750c | Quick Start - Page 2
Quick Setup Epson PowerLite 750/760c Using the remote control 1 If this is your first time using the remote, make sure its batteries are installed as shown. Turn off projector display and sound Choose which source to display Optimize the computer image Turn projector on and off Zoom in on part of
-
1 -
2
 |
 |
1
Locate the required cables:
2
Connect the computer cable to
the blue
Computer/Component Video
port on the projector.
3
Connect the other end to your notebook’s video-out
or
monitor port.
NOTE:
If your notebook has a DVI connector, you need to use an
optional DVI-to-VGA adapter with the included computer cable
(see your computer’s documentation).
4
Connect the power cord to the
projector, then plug the other end
into an electrical outlet.
1
Turn on your notebook.
2
Remove the projector’s lens cover.
3
Make sure the
Power
light
is orange and not flashing.
4
Press the
Power
button
to turn on the projector.
S
T
A
R
T
H
E
R
E
T
urn on your equipment
C
onnect the projector
to your notebook
Follow these instructions to connect the projector to your
notebook. For other setup options, see your
User’s Guide
.
Epson
®
PowerLite
®
750c/760c
Quick Setup
Power cord
VGA computer cable
1
If you’ve turned on your notebook and you don’t see an image,
press the
Source Search
button on the projector to select the
image source.
NOTE:
If you still see a blank screen or have other display problems,
see the troubleshooting tips on the back of this sheet.
2
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
3
If your image looks like
or
, you’ve placed the projector off
to one side of the screen at an angle. Place it directly in front of the
center of the screen, facing the screen squarely.
4
If your image looks like
or
, press the
or
buttons
on the projector to correct it.
A
djust the image
CAUTION:
Before unplugging the projector...
Shut down the projector properly:
1
.
Press the
Power
button twice.
2
.
When the orange light stops flashing and the projector beeps,
you can unplug the projector.
Power button
Power light
Zoom
Focus