Epson PowerLite 750c User's Guide

Epson PowerLite 750c Manual

Get Epson PowerLite 750c PDF manuals and user guides View all Epson PowerLite 750c manuals
Add to My Manuals
Save this manual to your list of manuals

Epson PowerLite 750c manual content summary:

  • Epson PowerLite 750c | User's Guide - Page 1
    Epson® PowerLite® 750c/760c Multimedia Projector User's Guide
  • Epson PowerLite 750c | User's Guide - Page 2
    User's Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. WARNING: The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation. Caution: When you replace the lamp
  • Epson PowerLite 750c | User's Guide - Page 3
    11 Displaying and Adjusting the Image 13 Positioning the Projector 14 Projecting the Image 16 Turning On the Projector 16 Selecting the Image Source 17 Troubleshooting Display Problems 18 You Can't Project an Image 18 The Projector and Notebook Don't Display the Same Image 18 Adjusting
  • Epson PowerLite 750c | User's Guide - Page 4
    2 3 Using the Remote Control 27 Using the Remote Control 28 Replacing the Batteries 28 Controlling the Picture and Sound 29 Switching Between Picture Sources 29 41 Connecting a Component Video Source 42 Connecting an RGB Video Source 43 Playing Sound Through the Projector 44 4 Contents
  • Epson PowerLite 750c | User's Guide - Page 5
    68 Checking Projector Status 69 What To Do When the Lights Flash 69 Viewing Lamp Usage and Other Information 71 Solving Projector Operation Problems 71 Solving Problems with the Image or Sound 72 Solving Problems with the Remote Control 78 Where To Get Help 78 Telephone Support Services 79
  • Epson PowerLite 750c | User's Guide - Page 6
    A Projector Installation 81 B Technical Specifications 83 General 83 Projection Lamp 84 Remote Control 84 Dimensions 84 Electrical 84 Environmental 84 Safety 85 Compatible Video Formats 85 C Notices 87 Important Safety Instructions 87 Remote Control Information 89 Declaration of
  • Epson PowerLite 750c | User's Guide - Page 7
    - Welcome The Epson® PowerLite® 750c/760c is an easy-to-use projector that weighs less than 4 pounds. The projector offers up to 2500 lumens (760c) or 2000 lumens (750c) of brightness. You can connect it to a wide range of computers and video sources. Easy control The projector's keystone correction
  • Epson PowerLite 750c | User's Guide - Page 8
    Setup sheet Gives you the instructions you need to get your projector up and running if you are connecting to a notebook, PowerBook®, or iBook® computer. ■ Start Here kit Includes this User's Guide, your Quick Setup sheet, warranty brochures, and Epson PrivateLine® Support card. Keep the kit with
  • Epson PowerLite 750c | User's Guide - Page 9
    7661 and enter the PIN on the card in your Start Here kit. Or take advantage of Epson's automated support services 24 hours a day. See page 78 for more information. Registration and Warranty Your projector comes with a basic carry-in warranty as well as an international warranty that let you project
  • Epson PowerLite 750c | User's Guide - Page 10
    for transportation instructions. Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive an S-Video signal, you'll need an S-Video cable. One may be provided with your video equipment, or you can purchase one from Epson
  • Epson PowerLite 750c | User's Guide - Page 11
    to provide a VGA output port; see your computer dealer. Optional Accessories To enhance your use of the projector, Epson provides the following optional accessories: Product Replacement lamp Air filter replacement set (2 filters) ATA molded hardshell case Samsonite® wheeled soft case Notebook
  • Epson PowerLite 750c | User's Guide - Page 12
    12 Welcome
  • Epson PowerLite 750c | User's Guide - Page 13
    video equipment, you need to follow some basic steps to display your image on the screen. Follow the guidelines in this chapter for: ■ Positioning the projector ■ Turning the projector on and selecting the image source ■ Troubleshooting display problems ■ Adjusting the image ■ Turning off the
  • Epson PowerLite 750c | User's Guide - Page 14
    the audience, and remain close enough to the equipment to be able to control it. Try to leave as much space as possible between the projector and the screen to get a good-size image. Use the figure below to help you determine placement. Image size increases with distance, but can vary
  • Epson PowerLite 750c | User's Guide - Page 15
    to the lock port on the projector's left side. You can purchase this from Epson; see page 11. If you place the projector below screen level, you'll buttons on the projector. See page 22 for detailed information about correcting the image shape. For instructions on installing the projector in a
  • Epson PowerLite 750c | User's Guide - Page 16
    equipment are set up as described on page 35. Then follow the instructions below to start the projector and display an image. note To shut down the projector, see page 24. Shutting down the projector correctly prevents premature lamp failure and possible damage from overheating. Turning On the
  • Epson PowerLite 750c | User's Guide - Page 17
    button on the projector or the Search button on the remote control until you see the image you want to project. You can also use the Source buttons on the remote control to switch between devices connected to the ports identified on each button. The PowerLite 750c/760c does not support EasyMP.TM
  • Epson PowerLite 750c | User's Guide - Page 18
    Troubleshooting Display Problems Follow these guidelines if you're having trouble displaying an image. You Can't Project an a function key that lets you toggle between the LCD screen and the projector, or display on both at the same time. It may be labeled CRT/LCD or have an icon such as . You may
  • Epson PowerLite 750c | User's Guide - Page 19
    screens, you should check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. From the Control Panel, You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple® menu, select
  • Epson PowerLite 750c | User's Guide - Page 20
    need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple resolution settings: 1. Click the Monitor icon. Click here Select a Simulscan resolution 2. Select a Simulscan resolution as shown. (Allow a few seconds for the projector
  • Epson PowerLite 750c | User's Guide - Page 21
    . 3. If necessary, you can fine-tune the height or level the image by turning the projector's rear foot. Raising the projector causes the image to distort or "keystone," but you can manually correct the shape as described on page 22. Projector rear foot Displaying and Adjusting the Image 21
  • Epson PowerLite 750c | User's Guide - Page 22
    on the remote control to zoom in on a portion of the image. See page 31 for instructions. Adjusting the Image Shape In most cases, you can maintain a square or rectangular image by placing the projector directly in front of the center of the screen with the base of the lens level with
  • Epson PowerLite 750c | User's Guide - Page 23
    correction, then use the remote's Resize button to adjust the aspect ratio. See page 32. ■ Or press the Menu button on the remote control or projector, select the Setting menu, and press Enter. From the Setting menu, select Keystone and press Enter. Use the pointer button on the remote control to
  • Epson PowerLite 750c | User's Guide - Page 24
    tracking, sync, resolution, and position settings. If the Auto button doesn't correct the problem, you may need to adjust the tracking or sync using the projector's Signal menu. See page 50 for more information. note You can set the projector to automatically turn off the projector lamp and enter
  • Epson PowerLite 750c | User's Guide - Page 25
    the adjustable front foot, press up on the blue foot release lever to retract it. 5. Replace the lens cap. caution Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce the projector's overall life. Using the Direct Power On Function The Direct Power On function enables
  • Epson PowerLite 750c | User's Guide - Page 26
    26 Displaying and Adjusting the Image
  • Epson PowerLite 750c | User's Guide - Page 27
    For information and resources to help you give the most professional presentation, be sure to visit presentersonline.com. Using the Remote Control The projector includes a number of tools to enhance your presentation. All of them can be accessed using the remote control, which lets you operate the
  • Epson PowerLite 750c | User's Guide - Page 28
    at the screen. ■ Stand within 20 feet of the projector. ■ Avoid using the remote under bright fluorescent lamps or in direct sunlight, or the projector may not respond properly. caution When replacing batteries, take the following precautions: ■ Replace the batteries as soon as they run out. If the
  • Epson PowerLite 750c | User's Guide - Page 29
    the picture, and adjust the volume. Switching Between Picture Sources If your projector is connected to more than one computer and/or video source, you Search button on the remote control (or the Source Search button on the projector) repeatedly until you see the image you want on the screen. ■ On
  • Epson PowerLite 750c | User's Guide - Page 30
    Turning Off the Picture and Sound You can use the A/V Mute button on the remote control to turn off the image and sound. This feature is useful if you want to temporarily redirect your audience's attention. ■ To turn off the picture, press the A/V Mute button. The screen turns blue. ■ To turn the
  • Epson PowerLite 750c | User's Guide - Page 31
    done, press the ESC button to return the image to its original size. Controlling the Volume To change the volume, press the or control or projector. button on the remote note To temporarily shut off the sound and picture, press the A/V Mute button. You can also adjust the volume using the
  • Epson PowerLite 750c | User's Guide - Page 32
    of the computer (which makes the image larger or smaller, depending on its resolution). If the resolution of the image is the same as the projector's (1024 × 768), pressing Resize has no effect. Adjusting the Color Mode You can use the Color Mode button on the remote control to adjust the
  • Epson PowerLite 750c | User's Guide - Page 33
    Operating Your Computer with the Remote Control If you've connected a computer to the projector with a USB cable, as described on page 38, you can use the remote control in place of your computer's mouse. This gives you more flexibility
  • Epson PowerLite 750c | User's Guide - Page 34
    press the Pointer button on the remote control. A pointer appears on the screen. Pointer If you prefer to use a different style of pointer, see the instructions in the next section. 2. Use the pointer button on the remote control to position the pointer on the screen. 3. When done using the pointer
  • Epson PowerLite 750c | User's Guide - Page 35
    to Computers and Other Equipment This chapter tells you how to connect the projector to a notebook or desktop computer, and/or to video equipment, such as a VCR, DVD player, or video camera. Follow the instructions in this chapter on: ■ Connecting to a computer ■ Connecting video equipment ■ Playing
  • Epson PowerLite 750c | User's Guide - Page 36
    on page 37 (available from Epson; see page 11). Connecting to a Computer You can connect the PowerLite projector to any computer that has a the blue Computer/ Component Video port (standard VGA cable connection), see the instructions below. After connecting to the computer, you may also want to do
  • Epson PowerLite 750c | User's Guide - Page 37
    page 16 for instructions on turning on the projector and adjusting the image Epson (see page 11). 1. To use the adapter, remove its cover as shown and set its DIP switches according to the resolution you want to use, such as 16-inch mode. See your Macintosh documentation for instructions. 2. Replace
  • Epson PowerLite 750c | User's Guide - Page 38
    10.3.x or OS 8.6 to OS 9.x. This function is not supported if you use an S-Video cable to connect your computer to the projector. 1. Locate the USB cable that came with your projector. 2. Connect the square end of the cable to the projector's USB port. note For details on using the remote control
  • Epson PowerLite 750c | User's Guide - Page 39
    Video Equipment You can connect several video sources to the projector at the same time. Before starting, look at your you may also want to connect an audio cable to play sound through the projector; see page 44. RCA connector (composite video) S-Video connector VGA connector (RGB video)
  • Epson PowerLite 750c | User's Guide - Page 40
    cables. 4. If you don't need to make any other connections, see page 16 or the Quick Setup sheet for instructions on turning on the projector and adjusting the image. Once the projector is turned on, select the image source: press the Search button on the remote control or press the Source Search
  • Epson PowerLite 750c | User's Guide - Page 41
    video equipment or you can purchase one from Epson; see page 10). 2. Connect the cable to the S-Video connector on your player and the S-Video connector on the projector: 3. If you want to play sound through the projector, see page 44 for instructions on connecting audio cables. 4. If you don't need
  • Epson PowerLite 750c | User's Guide - Page 42
    to-VGA adapter for this connection. You can order this cable (ELPKC19) from Epson; see page 11 for more information. 1. Locate a component-to-VGA video connections, see page 16 for instructions on turning on the projector and adjusting the image. Once the projector is turned on, select the image
  • Epson PowerLite 750c | User's Guide - Page 43
    on connecting audio cables. 4. If you don't need to make any other connections, see page 16 for instructions on turning on the projector and adjusting the image. Once the projector is turned on, select the image source: press the Search button on the remote control or press the Source Search
  • Epson PowerLite 750c | User's Guide - Page 44
    If you have video equipment connected to the Video or S-Video port, use an RCA-style audio cable and the audio adapter included with the projector. Audio adapter 2. Connect the other end of the cable to the audio output connector(s) on your computer or video equipment. 44 Connecting to Computers and
  • Epson PowerLite 750c | User's Guide - Page 45
    to adjust the image, sound, and other features. This chapter covers the following information: ■ Using the menu system ■ Adjusting the image ■ Adjusting signal settings ■ Customizing projector features ■ Using the projector security features ■ Customizing power and operation 45
  • Epson PowerLite 750c | User's Guide - Page 46
    options available for the highlighted menu are shown on the right. 2. Use the pointer button on the remote control (or the arrow buttons on the projector) to scroll through the menu list. When you've highlighted the desired menu, press the Enter button to select it. 3. Once you've selected the
  • Epson PowerLite 750c | User's Guide - Page 47
    example below shows how to reset the Image menu.) + ON OFF Reset settings for current menu Reset settings for all menus To restore all the projector settings to their factory-default values, select the Reset menu, highlight All Reset, and press Enter. note When you select Reset All in the Reset
  • Epson PowerLite 750c | User's Guide - Page 48
    Adjusting the Image You can use the Image menu to adjust the brightness, sharpness, color, tint, and contrast. 1. Press the Menu button on the projector or remote control and select the Image menu. You see the Image menu screen. 2. Use the pointer button to highlight the desired option, then adjust
  • Epson PowerLite 750c | User's Guide - Page 49
    The Brightness setting changes the opacity of the projector's LCD panels. You can also change the lamp's brightness. Select Brightness Control in the Setting remote control's Auto button to automatically reset the projector's tracking, sync, resolution, and position settings. See page 24 for
  • Epson PowerLite 750c | User's Guide - Page 50
    a component video signal. ■ Video Signal Leave this setting at Auto unless you are using a 60-Hz PAL system (then select PAL60). 50 Fine-Tuning the Projector
  • Epson PowerLite 750c | User's Guide - Page 51
    and enabled by default). ■ Operation Lock Lets you disable all of the buttons on the projector except the Power button. See page 57 for more information. ■ Pointer Shape Lets you The Low setting reduces power consumption and noise, and extends the lamp's operating life. Fine-Tuning the Projector 51
  • Epson PowerLite 750c | User's Guide - Page 52
    projector's speaker. ■ EasyMP Audio Out The PowerLite 750c/760c does not support EasyMP. Using the Projector Security Features To prevent unauthorized use of the projector the projector should it be stolen. note It's a good idea to write down your password. If you leave the projector plugged
  • Epson PowerLite 750c | User's Guide - Page 53
    you use the numeric keypad to enter the number of hours (from 0 to 9999) that you want the password feature disabled. If you want the projector to request the password every time it is turned on, set the timer to 0H. caution If you lose the remote control, you will not
  • Epson PowerLite 750c | User's Guide - Page 54
    , select User's Logo Protect and press Enter. Select ON and press Enter. When this feature is on, the logo appears whenever you turn on the projector (if the Startup Screen is enabled in the Extended menu; see page 55). It also appears when you press the A/V Mute button (if you selected
  • Epson PowerLite 750c | User's Guide - Page 55
    the correct password. If you enter an incorrect password 30 times in succession, the projector remains locked and you must contact Epson to unlock it. If you have forgotten the password, contact Epson with the request code number that appears in the Password Protect Release screen for assistance
  • Epson PowerLite 750c | User's Guide - Page 56
    . 7. When the message Save image as user's logo? appears, select Yes and press Enter. Saving the logo may take a few moments. Do not use your projector, remote control, or video source while the logo is being saved. 8. When you see the message Completed, press Esc to return to the menu screen
  • Epson PowerLite 750c | User's Guide - Page 57
    to exit. Customizing Power and Operation You can use the Extended menu to customize the way the projector displays images, enable quick startup, turn sleep mode on or off, and customize other projector operations. ■ Display Use this setting to turn off the display of messages, change the background
  • Epson PowerLite 750c | User's Guide - Page 58
    (without pressing the Power button). Enable Sleep Mode if you want to have the projector turn off automatically if it is idle (and no signal is received) for 30 minutes. ■ Standby Mode The PowerLite 750c/760c does not support Standby Mode. ■ Link 21L Enable this setting if you want to be able to
  • Epson PowerLite 750c | User's Guide - Page 59
    the side and bottom of the projector. A clogged air filter can block ventilation needed to cool the projector. The only parts you should replace are the lamp and air filter. If any other part needs replacing, contact your dealer or a qualified servicer. This chapter covers the following: ■ Cleaning
  • Epson PowerLite 750c | User's Guide - Page 60
    cleaning caution Do not use wax, alcohol, benzene, thinner, or other chemical detergents. These can damage the case. Cleaning the Projector Case Before you clean the case, turn off the projector and unplug the power cord. ■ To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth
  • Epson PowerLite 750c | User's Guide - Page 61
    , request part number V13H134A08. See page 11 for ordering information. 4. If the dirt is difficult to remove or the filter is broken, replace the filter as described on page 64. Contact your dealer or call Epson at 800-GO-EPSON (800-873-7766) to obtain a new filter. Maintaining the Projector 61
  • Epson PowerLite 750c | User's Guide - Page 62
    on the screen when the lamp comes on and the lamp warning light flashes orange. To maintain projector brightness and image quality, replace the lamp as soon as possible. ■ The lamp warning light flashes red (the lamp is burnt out). Contact your dealer or call Epson at 800-GO-EPSON (800-873-7766
  • Epson PowerLite 750c | User's Guide - Page 63
    4. Turn the projector over. Press in on the tabs and lift up the lamp cover. 5. Loosen the two screws holding the lamp in place (you don't need to remove them). Loosen, but don't remove these screws 6. Hold the lamp as shown and pull it straight out. note The lamp(s) in this product contain
  • Epson PowerLite 750c | User's Guide - Page 64
    until it clicks in place. 11. Insert the two cover tabs, then press down on the cover until it snaps into place. 12. Reset the lamp timer as described in the next section. 64 Maintaining the Projector
  • Epson PowerLite 750c | User's Guide - Page 65
    After you replace the lamp, you need to reset the lamp timer using the projector's menus. 1. Press the Menu button on the remote control or on the projector's control panel. You see the main menu. 2. Use the pointer button on the remote control (or the arrow buttons on the projector) to highlight
  • Epson PowerLite 750c | User's Guide - Page 66
    note Epson shall not be liable for any damages incurred during transportation. Transporting the Projector The projector contains many glass and precision parts. Follow these guidelines to prevent damage: ■ When shipping the projector for repairs, use the original packaging material if possible. If
  • Epson PowerLite 750c | User's Guide - Page 67
    you how to contact technical support for problems you can't solve yourself. The following information is included: ■ Using the projector's on-screen help system ■ What to do when the projector's status lights flash ■ Solving projector operation problems ■ Solving problems with the image or sound
  • Epson PowerLite 750c | User's Guide - Page 68
    working, you can get help by pressing the blue ? Help button on top of the projector or on the remote control. The following choices are available: ■ "No Signal." or no image appears on the screen ■ Problems with sound ■ Language change Follow these steps to get help: 1. Press the blue ? Help button
  • Epson PowerLite 750c | User's Guide - Page 69
    the power cord back in and turn on the projector. If this doesn't solve the problem, check the lights on top of the projector. What To Do When the Lights Flash The lights on top of the projector indicate the projector's status. Power light Lamp light Temperature light Refer to the following table
  • Epson PowerLite 750c | User's Guide - Page 70
    cooling fan or temperature sensor. Contact Epson for help as described on page 78. Warning: Except as specifically explained in this User's Guide, do not attempt to service this product yourself. Flashing orange It's time to replace the lamp. See page 62 for instructions. If you continue to use
  • Epson PowerLite 750c | User's Guide - Page 71
    usage hours on this menu are close to the life span of your lamp. note The information displayed depends on the input signal currently selected. Solving Projector Operation Problems The power doesn't turn on. ■ If the projector doesn't turn on when you press the PPower button, make sure the power
  • Epson PowerLite 750c | User's Guide - Page 72
    Solving Problems with the Image or Sound No image appears on the screen. ■ Check that the Power light is green, not flashing, and the lens cap is off. ■ The projector may be in standby or sleep mode. If the Power light is orange, press the PPower button to turn the projector on. ■ If the
  • Epson PowerLite 750c | User's Guide - Page 73
    of the other. This lets you display on the projector screen as well as the LCD screen. 4. If this option isn't available, click the Monitor icon. 5. Select one of the listed Simulscan resolutions. (Allow a few seconds for the projector to sync up after making the selection.) Solving Problems 73
  • Epson PowerLite 750c | User's Guide - Page 74
    resolution doesn't exceed UXGA (1600 × 1200) and the frequency is supported by the projector (see page 85). If necessary, change your computer's resolution sure your computer's resolution setting is correct. Ideally, it should be 1024 × 768 to match the projector's native resolution. If this option
  • Epson PowerLite 750c | User's Guide - Page 75
    projected image quality when the image is displayed simultaneously on your notebook computer and the projector, turn off the notebook's LCD display. ■ Make sure the correct input signal is selected in the Signal menu (see select Reset to return to the factory default settings. Solving Problems 75
  • Epson PowerLite 750c | User's Guide - Page 76
    reset the projector's tracking and sync settings. ■ If further adjustment is needed, you can fine-tune the Tracking and Sync settings manually using the Signal If you're displaying a computer image, use the Color Mode option in the projector's Image menu to adjust the color (see page 48). ■ If you'
  • Epson PowerLite 750c | User's Guide - Page 77
    menu. ■ Check your computer display settings to correct the color balance. ■ The projector's lamp may need to be replaced. See page 62 for instructions. There is no sound, or the sound is not loud enough. ■ Press the in your Windows system tray (lower right corner of the screen). Solving Problems 77
  • Epson PowerLite 750c | User's Guide - Page 78
    a day, as listed in the following table. Service Access World Wide Web From the Internet, you can reach Epson's product support page at http://support.epson.com. After selecting your product, you can access troubleshooting information, download product documentation, and receive technical advice
  • Epson PowerLite 750c | User's Guide - Page 79
    apply. Before you call, please have the following information ready: ■ Product name (Epson PowerLite 750c760c) ■ Product serial number (located on the bottom of the projector) ■ Computer configuration ■ Description of the problem You can purchase screens, carrying cases, or other accessories from an
  • Epson PowerLite 750c | User's Guide - Page 80
    80 Solving Problems
  • Epson PowerLite 750c | User's Guide - Page 81
    mounting hardware; see page 11 for ordering information. You'll also need to select Front/Ceiling or Rear/Ceiling as the Projection option of the projector's Extended menu to flip the image upside-down. To project from the rear, onto a semi-transparent screen, select Rear or Rear/Ceiling (see page
  • Epson PowerLite 750c | User's Guide - Page 82
    . This causes the image to lose its square shape. You can correct the distortion using the Keystone function in the projector's menu system (see page 51). If you place the projector so that the base of the lens is level with the bottom of the screen, the image should be square and
  • Epson PowerLite 750c | User's Guide - Page 83
    General Type of display Resolution (native format) Color reproduction Brightness 750c 760c Contrast ratio Image size Projection distance Projection methods Internal sound system Optical aspect ratio Zoom ratio Noise level Keystone correction Mouse compatibility Epson poly-silicon TFT active
  • Epson PowerLite 750c | User's Guide - Page 84
    Type UHE (Ultra High Efficiency) Power consumption 170 W Lamp life Approx. 2000 hours (High Brightness mode) Approx. 3000 hours (Low Brightness mode) Part number V13H010L32 Remote Control Range 20 feet (6 meters) Batteries (2) Alkaline AAA
  • Epson PowerLite 750c | User's Guide - Page 85
    55024 Pixelworks™ DNX™ ICs are used in this projector. Compatible Video Formats The projector supports NTSC, PAL, and SECAM international video standards, -75 SVGA-85 Refresh Rate (Hz) 70 60 72 75 85 56 60 72 75 85 Resolution 640 × 350* 640 × 480* 640 × 480* 640 × 480* 640 × 480* 800 ×
  • Epson PowerLite 750c | User's Guide - Page 86
    Mode Refresh Rate (Hz) Resolution XGA-60 60 XGA-70 70 XGA-75 75 XGA-85 85 SXGA1-70 70 SXGA1-75 (1080i) 60 - HDTV (1080i) 50 - TV480i 60 - TV480i 50 - SDTV (480p) 60 - SDTV (480p) 50 - *The image is resized using Epson's SizeWise™ Technology. 86 Technical Specifications
  • Epson PowerLite 750c | User's Guide - Page 87
    and other important information about your Epson PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use the projector near water or sources of heat
  • Epson PowerLite 750c | User's Guide - Page 88
    or frayed. If liquid has been spilled into the projector, or if it has been exposed to rain or water. If it does not operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service. If it has been dropped or the housing
  • Epson PowerLite 750c | User's Guide - Page 89
    conditions commonly cause problems for most infrared-controlled equipment. Try the following: ■ The remote control's batteries may be low on power; replace them. ■ Dim the ambient lighting and/or turn off any fluorescent lights. ■ Close any window coverings and/or move the projector out of direct
  • Epson PowerLite 750c | User's Guide - Page 90
    conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Trade Name: Epson Type of Product: Projector Model: EMP-750/760 Marketing Name: PowerLite 750c/760c 90 Notices
  • Epson PowerLite 750c | User's Guide - Page 91
    installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular
  • Epson PowerLite 750c | User's Guide - Page 92
    purchase (except that the warranty period is 90 days for projector lamps). For warranty service, you must provide proof of the date of original purchase. What Epson Will Do To Correct Problems: If you elect carry-in warranty service, please bring the product securely packaged in its original
  • Epson PowerLite 750c | User's Guide - Page 93
    THE REMEDIES ABOVE FAIL, EPSON'S ENTIRE LIABILITY SHALL BE LIMITED TO A REFUND OF THE PRICE PAID FOR THE EPSON PRODUCT COVERED BY THIS , which vary from jurisdiction to jurisdiction. To locate the Authorized Epson Servicer nearest you, call the Epson ConnectionSM at (800) 637-7661 + PIN or (562) 276
  • Epson PowerLite 750c | User's Guide - Page 94
    94 Notices
  • Epson PowerLite 750c | User's Guide - Page 95
    , 11, 79 Adapter audio, 10, 44 Macintosh, 11, 37 Air filter cleaning, 61 ordering, 11 replacing, 62 to 64 Anti-theft device, 11, 15 Aspect ratio, 83 Audio adapter, 10, 44 controlling volume, 31 problems, troubleshooting, 77 turning off (using A/V Mute), 30 Auto button, 24 Auto Setup setting, 50
  • Epson PowerLite 750c | User's Guide - Page 96
    menu, 48 to 50 Info menu, 71 Input signal, selecting, 17, 29, 40 to 43 Installing projector, 81 to 82 K Kensington anti-theft device, 11, 15 Keystone correction, 22 to 23, 51, 75, 83 L Lamp number of hours used, 71 ordering, 11 replacing, 62 to 65 specifications, 84 status light, 69 to 70
  • Epson PowerLite 750c | User's Guide - Page 97
    , 89 numeric keypad, using, 53 pointer tool, using, 34 problems, 78, 89 range, 84 specifications, 84 switching sources, 29 troubleshooting, 78 Replacing lamp, 62 to 65 Request code, password, 54 Resetting lamp timer, 65 Resetting menu options, 47 Resize image, 32 Resolution, 32, 74, 83 Index 97
  • Epson PowerLite 750c | User's Guide - Page 98
    98 Index T Technical support, 8, 78 to 79 Temperature requirements, 84 status light, 69 to 70 Theatre color mode, 48 Tracking, adjusting, 24, 76 Transporting projector, 66 Troubleshooting blank screen, 18 to 20, 72 to 73 cut-off image, 74 distorted image, 22 to 23 image and sound problems, 72 to 77
  • Epson PowerLite 750c | User's Guide - Page 99
    Exhaust air vent Foot adjust lever Front adjustable foot Control panel Zoom ring Focus ring Remote control receiver Security lock Lens cover USB port Audio port Video port S-Video port Computer/Component Video port Power inlet Rear adjustable foot Speaker
  • Epson PowerLite 750c | User's Guide - Page 100
    in PowerPoint Enter (left mouse button) Esc (right mouse button) Activate on-screen pointer Switch between equipment connected to projector ports Optimize computer images Turn projector on and off Move cursor on screen Turn off picture and sound Stop action Activate numeric keypad Select color mode
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Epson
®
PowerLite
®
750c/760c
Multimedia Projector
User’s Guide