Epson PowerLite 81p Product Information Guide

Epson PowerLite 81p Manual

Get Epson PowerLite 81p PDF manuals and user guides View all Epson PowerLite 81p manuals
Add to My Manuals
Save this manual to your list of manuals

Epson PowerLite 81p manual content summary:

  • Epson PowerLite 81p | Product Information Guide - Page 1
    Epson PowerLite 61p/81p Projector Projector Parts Zoom ring Focus ring Air exhaust vent Lamp cover Control panel Power button Foot release lever Front adjustable foot Lens cap I/R receiver Handle Computer1/Component Computer2/Component Video1 and Audio1 ports Video2 and Audio2 ports
  • Epson PowerLite 81p | Product Information Guide - Page 2
    Third Edition EN 55022, EN 55024 Compatible Video Formats The projector supports NTSC, PAL, and SECAM international video standards, as well as SDTV and HDTV display formats. Mode NTSC NTSC 4:3 PAL PAL 4:3 SECAM SECAM 4:3 HDTV (720p) HDTV (1080i) SDTV (480i) SDTV (540i) SDTV (480p) Refresh
  • Epson PowerLite 81p | Product Information Guide - Page 3
    source manually. See "Selecting the Image Source" on page 5. Follow these steps to plug in and turn on the projector: 1. Remove the lens cap. Caution Do not use the projector with the lens cap in place. The heat generated by the lamp can damage the cap. 6/04 Epson PowerLite 61p/81p Projector - 3
  • Epson PowerLite 81p | Product Information Guide - Page 4
    system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Control Panels, then click Monitors or Monitors and Sound. 2. Click the Arrange icon. 3. Drag one monitor icon on top of the other. 4 - Epson PowerLite 61p/81p Projector 6/04
  • Epson PowerLite 81p | Product Information Guide - Page 5
    the image is positioned where you want it, release the lever to lock the foot in position. 3. To fine-tune the height of the image, rotate the feet at the back of the projector. If the image is no longer rectangular after raising it, see the next section. 6/04 Epson PowerLite 61p/81p Projector - 5
  • Epson PowerLite 81p | Product Information Guide - Page 6
    control. This automatically resets the projector's tracking, sync, resolution, and position settings. You must be projecting an image for this button to have any effect. Additionally, if the Auto Setup option in the Signal menu is set to OFF, the Auto function will not work. 6 - Epson PowerLite 61p
  • Epson PowerLite 81p | Product Information Guide - Page 7
    the projector or lamp, never unplug the power cord when the P Power light is green or flashing orange. 6. Turn off and disconnect any equipment connected to the projector. 7. Store the projector in the soft case that came with it or in another protective case. Using the Remote Control Before
  • Epson PowerLite 81p | Product Information Guide - Page 8
    Epson PowerLite 61p/81p Projector Using the Remote Control as a Wireless Mouse When you use the remote control as a wireless mouse, you can control your computer or click through slideshow-style presentations (such as PowerPoint) from up to 20 feet away. To control your computer with the remote,
  • Epson PowerLite 81p | Product Information Guide - Page 9
    Epson PowerLite 61p/81p Projector Using Password Protection If you assign a password for the projector, a screen appears requesting the password whenever you turn on the projector. If you enter the password incorrectly three times in succession, the projector's operation is locked. Disconnect the
  • Epson PowerLite 81p | Product Information Guide - Page 10
    normally. Off The projector is cooling down. Wait for the light to stop flashing and remain orange before unplugging it. Flashing red There is an internal error in the projector. Turn off the projector and unplug it. Contact Epson for help. 10 - Epson PowerLite 61p/81p Projector 6/04
  • Epson PowerLite 81p | Product Information Guide - Page 11
    Epson PowerLite 61p/81p Projector Power Lamp light light Flashing Off green Green Off Flashing Off orange Red Off Red Flashing red - Flashing orange Red Off Flashing Off red Orange Off Temperature light Description Off The projector is warming up. Wait for the image to appear. Off The
  • Epson PowerLite 81p | Product Information Guide - Page 12
    replacing it. If the lamp breaks, handle the shards carefully to avoid injury. 3. Use the screwdriver included with the replacement lamp to loosen the screw holding the lamp cover (located on top of the projector). 4. Slide the cover out, then lift it off. 12 - Epson PowerLite 61p/81p Projector
  • Epson PowerLite 81p | Product Information Guide - Page 13
    remote control and select the Reset menu. Then press Enter. You see the following: 3. Select Lamp-Hours Reset and press Enter. You see the following: Caution: Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 6/04 Epson PowerLite 61p
  • Epson PowerLite 81p | Product Information Guide - Page 14
    ELPMBACC Note: To purchase a replacement remote control, call (562) 276-4394 (U.S.) or (905) 709-3839 (for dealer referral in Canada). Related Documentation CPD-17998 CPD-18000 Epson PowerLite 61p/81p User's Guide Epson PowerLite 61p/81p Quick Setup 14 - Epson PowerLite 61p/81p Projector 6/04
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
Epson PowerLite 61p/81p Projector
6
/04
Epson PowerLite 61p/81p Projector
-
1
Projector Parts
Specifications
General
Type of display
Poly-silicon TFT active matrix
LCD panels (3)
Diagonal size: 0.7 inches (17.8 mm)
Lens
F=1.70 to 1.87,
focal length=21.3 to 25.6 mm
Resolution
EMP-81p: 1024
×
768 pixels
(native format)
EMP-61p: 800
×
600 pixels
Color
Full color, 16.8 million colors
reproduction
Brightness
2000 lumens (High brightness mode)
(ANSI)
1500 lumens (Low brightness mode)
Contrast ratio
400:1
Image size
30 to 300 inches (0.8 to 7.6 meters)
Projection
2.9 to 35.5 feet (0.9 to 10.8 meters)
distance
Projection
Front, rear, ceiling
methods
Focus adjustment
Manual
Zoom adjustment
Manual
Internal
5 W monaural
sound system
Optical aspect
4:3 (horizontal:vertical)
ratio
Zoom ratio
1:1.2
Noise level
36 dB (High brightness mode)
30 dB (Low brightness mode)
Keystone
± 15° vertical (maximum)
correction angle
Projection Lamp
Power
200 W UHE
consumption
Lamp life
High brightness: about 2000 hours
Low brightness: about 3000 hours
Part number
V13H010L30
Remote Control
Range
20 feet (6 meters)
Batteries (2)
Alkaline AAA
Note:
The remote control is not a user-replaceable part. To
purchase a replacement remote, call (562) 276-4394 (U.S.)
or (905) 709-3839 (for dealer referral in Canada).
Mouse Compatibility
Supports USB
Dimensions
Height
4.3 to 4.8 inches foot extended
(109 to 123 mm)
Width
13.8 inches (351 mm)
Depth
10.7 inches (272 mm)
Weight
8.9 lb (4.0 kg)
Control panel
Power button
Front
adjustable
foot
Foot release
lever
I/R receiver
Lens cap
Zoom ring
Focus ring
Lamp cover
Air exhaust
vent
Handle
Computer1/Component
Video1 and Audio1 ports
Computer2/Component
Video2 and Audio2 ports
USB port
I/R receiver
Monitor
Out port
Speaker
Rear adjustable
foot
Power inlet
Audio Out
port
Video and related
Audio in port
S-Video and related
Audio in port
RS323 port
Security lock
Rear
adjustable
foot