Epson PowerLite 905 Quick Setup
Epson PowerLite 905 Manual
 |
View all Epson PowerLite 905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite 905 manual content summary:
- Epson PowerLite 905 | Quick Setup - Page 1
PowerLite® 95/96W/905/915W/1835 Quick Setup Before using the projector, make sure you read the safety instructions in the User's Guide on your projector CD. Connect the projector Choose from the following connections: Computer USB Port Connect a computer using a USB cable. Connect the square end - Epson PowerLite 905 | Quick Setup - Page 2
more information on using the remote control, see the User's Guide on your projector CD. Project wirelessly Follow the steps here to connect the projector wirelessly over an 802.11g, 802.11b, or 802.11n wireless network. You must install the optional Epson wireless LAN module (part number V12H418P12 - Epson PowerLite 905 | Quick Setup - Page 3
Wireless Connection USB key (Windows only), insert it into the projector's USB TypeA port, wait for the displayed message, remove the key, and connect it to a USB port on your computer. Follow the on-screen instructions to install the driver, then run your presentation. For details, see the User - Epson PowerLite 905 | Quick Setup - Page 4
see the EasyMP Network Projection Operation Guide on your projector CD. This guide is installed along with your projector User's Guide. To monitor and control your projector over the network, download and install the EasyMP Monitor software and manual from the Epson support web site. You can install
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User’s Guide
on your projector CD.
Connect the projector
Choose from the following connections:
Computer USB Port
Connect a computer using a USB cable.
Connect the square end of the USB cable to the projector’s
USB
TypeB
(square) port. Connect the flat end of the cable to any USB port on
your computer.
Windows
®
2000 SP4 or later:
After turning on the projector, follow
the on-screen instructions to install the Epson USB Display software
(EMP_UDSE.EXE; only on first connection).
Note:
If the software screen does not display automatically, open
My
Computer
or
Computer
, then double-click
EPSON_PJ_UD
. If it still does not
display, access the projector’s
Extended
menu and select
USB Display
as the
USB
Type B
setting. See the
User’s Guide
on your projector CD for instructions.
Mac OS
®
X 10.5.1 or higher:
After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end of the cable to the projector’s
Computer1
or
Computer2
port, and the other end to your computer’s
monitor port. If you are using
a notebook, switch it to external display (see “Troubleshooting”). You can also
connect an audio cable.
Wireless Network
You can connect the projector wirelessly over an 802.11g, 802.11b, or 802.11n
wireless network. See “Project wirelessly” for instructions.
Wired Network
You can connect the projector to your network using an Ethernet
®
cable.
See “Project over a wired network” on the back of this sheet for instructions.
Video Device
Connect up to 5 video devices and use the
Source Search
button on the
projector or remote control to switch between them. (All cables are optional).
RCA video cable (composite video)
Component video to VGA cable
Audio cable
S-Video cable
Audio cable
HDMI cable
Camera, USB Device, or Epson Document Camera DC-06
Connect a digital camera, USB flash drive, USB storage device, or Epson
document camera DC-06 to the projector’s USB
TypeA
(flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s
Slideshow
feature. See the
User’s Guide
on your projector
CD for details.
External Monitor, External Speakers, and Microphone
You can also connect an external monitor, external speakers, and a microphone
to your projector to enhance your presentations. See the
User’s Guide
on your
projector CD for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector.
The power light on the projector turns orange.
3
Open the
A/V Mute
slide all the way.
PowerLite
®
95/96W/905/915W/1835