Epson PowerLite Home Cinema 3020e Quick Setup
Epson PowerLite Home Cinema 3020e Manual
 |
View all Epson PowerLite Home Cinema 3020e manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite Home Cinema 3020e manual content summary:
- Epson PowerLite Home Cinema 3020e | Quick Setup - Page 1
PowerLite® Home Cinema 3020e Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Choose a location Keep the projector level and place it at a height so its lens is even with the top or bottom of the screen and is centered horizontally. If - Epson PowerLite Home Cinema 3020e | Quick Setup - Page 2
between 2D and 3D Access projector menus Control WirelessHD functions Navigate projector menus Turn off projector display For more information on using the remote control, see the online User's Guide. 1 Place the transmitter within 32 feet (10 m) of the projector. Make sure the front of the - Epson PowerLite Home Cinema 3020e | Quick Setup - Page 3
light on the transmitter will light up when the wireless display mode is active. Troubleshooting If you see a blank screen or the No 3D viewing mode, if necessary. • Make sure that you are within the 3D viewing range. See "Choose a location" on the front of this sheet or the online User's Guide - Epson PowerLite Home Cinema 3020e | Quick Setup - Page 4
desktop to access the online manual (requires an Internet connection). If you don't have a User's Guide icon, you can install it from the projector CD or go to the Epson website, as described below. Telephone support services To use the EPSON® PrivateLine® Support service, call (800) 637-7661. This
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Choose a location
Keep the projector level and place it at a height so its lens is even with the top
or bottom of the screen and is centered horizontally. If this isn’t possible, use
the horizontal keystone slider and keystone correction buttons to reposition the
image (see “Adjust the image”).
In order to view 3D images correctly, 3D glasses must be worn within 32 feet
(10 m) of the projector. Use the image below to determine the viewing distance
for 3D projection (the shading represents the 3D viewing area):
Make sure the Wireless HD Transmitter is also placed within 32 feet (10 m) of
the projector. See the online
User’s Guide
for more information on where to
place your projector.
Connect the projector
Choose from the following connections. For additional connection types, see
the online
User's Guide
.
Video Device
Connect up to 5 video devices and use the
Source
buttons on the projector or
remote control to switch between them.
Component video cable
Audio cable
RCA video cable
Audio cable
HDMI cable
Turn on your equipment
1
Turn on your video source or computer.
2
Plug in the projector. The
power button on the projector turns blue.
3
Remove the lens cap.
4
Press the
power button on the projector or the
On
button on the
remote control. The power
light flashes blue, and then stays on.
Note:
To shut down the projector, press the
power button on the
projector twice or the
Standby
button on the remote control, then
unplug it. You don’t have to wait for the projector to cool down.
5
The default language of the menu system is
English
. To select another
language, press the
Menu
button on the remote control. Select
Extended
and press
Enter
. Select
Language
and press
Enter
. Select your language
and press
Enter
. Press the
Menu
button to exit the menu system.
Adjust the image
1
If you don’t see an image, press the
Source
button on the projector or
select the image source on the remote control.
Note:
If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, adjust the front feet as shown below.
3
Turn the zoom ring to reduce or enlarge the image.
PowerLite
®
Home Cinema 3020e
*412372100*
*412372100*