Epson PowerLite Home Cinema 710HD Quick Setup

Epson PowerLite Home Cinema 710HD Manual

Get Epson PowerLite Home Cinema 710HD PDF manuals and user guides View all Epson PowerLite Home Cinema 710HD manuals
Add to My Manuals
Save this manual to your list of manuals

Epson PowerLite Home Cinema 710HD manual content summary:

  • Epson PowerLite Home Cinema 710HD | Quick Setup - Page 1
    PowerLite® Home Cinema 710HD Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Camera or USB device Connect a digital camera, USB flash drive, or USB storage device to the projector's USB TypeA (flat) port. Connect the projector Choose
  • Epson PowerLite Home Cinema 710HD | Quick Setup - Page 2
    on and off Choose which source to display Access projector menus Navigate projector menus Turn off projector display Get solutions to common problems For more information on using the remote control, see the online User's Guide. Troubleshooting If you see a blank screen or the No signal
  • Epson PowerLite Home Cinema 710HD | Quick Setup - Page 3
    PowerLite® Home Cinema 710HD Installation rapide Avant d'utiliser le projecteur, assurez-vous de lire les instructions de sécurité dans le Guide installer le logiciel EPSON USB Display ( pouvez aussi brancher un câble audio. Port HDMI Branchez l'une pourraient ne pas supporter la diffusion de
  • Epson PowerLite Home Cinema 710HD | Quick Setup - Page 4
    Guide de l'utilisateur, vous pouvez l'installer à partir du CD ou aller sur le site Web d'Epson, tel que décrit dans la section ci-dessous. Services de soutien téléphonique Pour utiliser l'assistance technique EPSON Internet Visitez le site Web www.epson.ca/support pour obtenir des solutions à des
  • 1
  • 2
  • 3
  • 4
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide
for details.
Video device
Connect up to 4 video devices and press the
Source Search
button on the
projector or remote control to cycle through them.
RCA video cable (composite video)
Component-to-VGA
adapter cable (included)
S-Video cable
Audio cable
HDMI cable
Component
video cable
Computer
USB port
Connect the square end of a USB cable to the projector’s
USB
TypeB
(square) port. Connect the flat end of the cable to any USB port on your
computer.
Windows
®
2000 SP4 or later:
After turning on the projector, follow the
on-screen instructions to install the EPSON
®
USB Display software
(
EMP_UDSE.EXE
; only on first connection). If the software screen does not
display automatically, open
My Computer
or
Computer
, then double-click
EPSON_PJ_UD
.
Mac OS
®
X 10.5.1 or higher:
After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the EPSON USB Display software
(only on first connection).
Note:
If you have problems installing the USB Display software, make sure the
USB Type B
setting in the projector’s
Extended
menu is set to
USB Display
.
See the online
User’s Guide
for instructions.
Monitor port
Connect one end of a VGA cable to the projector’s
Computer
port, and the
other end to your computer’s
monitor port. If you are using a laptop,
switch it to external display (see “Troubleshooting”). You can also connect an
audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s
HDMI
port and the other
end to an HDMI port on your computer.
Note:
To connect a Mac
®
that includes only a Mini DisplayPort or Mini-DVI
port for video output, you need to obtain an adapter that allows you to
connect to the projector’s HDMI port. Contact Apple
®
for compatible adapter
options. Older Mac computers (2009 and earlier) may not support audio
through the HDMI port.
Camera or USB device
Connect a digital camera, USB flash drive, or USB storage device to the
projector’s USB
TypeA
(flat) port.
You can use the projector’s Slideshow feature to project images. See the online
User’s Guide
for details.
Turn on your equipment
1
Turn on your video source or computer.
2
Plug in the projector.
The power light on the
projector turns orange.
3
Open the
A/V Mute
slide all the way.
4
Press the
power button on the
projector or remote control. The
projector beeps, and the power light
flashes green and then stays on.
Note:
To shut down the projector,
press the
power button twice, then
unplug it. You don’t have to wait for the
projector to cool down.
5
The default language of the menu system is
English
. To select another
language, press the
Menu
button on the remote control. Select
Extended
and press
Enter
. Select
Language
and press
Enter
. Select
your language and press
Enter
.
Press the
Menu
button to exit the menu
system.
Adjust the image
1
If you don’t see an image, press the
Source Search
button on the
projector or remote control to select the image source.
Note:
If you still see a blank screen or have other display problems, see the
troubleshooting tips on the right.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
PowerLite
®
Home Cinema 710HD
*412250500*
*412250500*
USB cable
HDMI cable
VGA cable